TP-Link TL-SF1016, TL-SF1016DS, TL-SF1024, TL-SF1024D, TL-SF1048 Installation Guide
...
Business Networking Solution
Installation Guide
Unmanaged/Easy Smart Rackmountable Switches
About this Installation Guide
This Installation Guide describes the hardware characteristics, installation methods and the
points that should be attended to during installation. This Installation Guide is structured as
follows:
Chapter 1 Introduction
This chapter describes the external components of the switch.
Chapter 2 Installation
This chapter illustrates how to install the switch.
Chapter 3 Connection
This chapter illustrates how to do the physical connection of the switch.
Appendix A Troubleshooting
Appendix B Hardware Specifications
Audience
This Installation Guide is for:
Network Engineer Network Administrator
Conventions
• When using this guide, notice that features available in JetStream series products may vary by
model and software version. Availability of JetStream series products may also vary by region or
ISP. All images, steps, and descriptions in this guide are only examples and may not reflect your
actual experience. Some models featured in this guide may be unavailable in your country or
region. For local sales information, visit https://www.tp-link.com.
• The speed of the ports in Extend Mode will downgrade to 10 Mbps. The actual transmissio
distance may vary due to power consumption of PoE-powered devices or the cable quality and
type.
• PoE budget calculations are based on laboratory testing. Actual PoE power budget is not
guaranteed and will vary as a result of client limitations and environmental factors.
• This guide uses the specific formats to highlight special messages. The following table lists the
notice icons that are used throughout this guide.
Remind to be careful. A caution indicates a potential which may result in device damage.
Remind to take notice. The note contains the helpful information for a better use of the
product.
Related Document
This Installation Guide is also available in PDF on our website. To obtain the latest
documentation and product information, visit the official website: https://www.tp-link.com.
Contents
Chapter 1 Introduction ––––––––––––––––––––––– 1
Chapter 2 Installation –––––––––––––––––––––––– 9
Chapter 3 Connection –––––––––––––––––––––––– 13
Appendix A Troubleshooting ––––––––––––––––––16
1.1 Product Overview .............................................................1
1.2 Appearance ........................................................................ 1
2.1 Package Contents ............................................................9
2.2 Safety Precautions ...........................................................9
2.3 Installation Tools ............................................................... 11
2.4 Product Installation ..........................................................11
3.1 Ethernet Port ...................................................................... 13
3.2 SFP Port ............................................................................... 13
3.3 Verify Installation ..............................................................13
3.4 Power On .............................................................................14
3.5 Initialization ......................................................................... 14
3.6 Accessing the Switch .....................................................14
Appendix B Specications –––––––––––––––––––– 17
Unmanaged/Easy Smart Rackmountable Switches
Chapter 1 Introduction
1.1 Product Overview
The Unmanaged/Easy Smart Switch provides you with a low-cost, easy-to-use, high-performance,
seamless, and standard upgrade to improve your network to 100 Mbps or 1000 Mbps.
TL-SG1008MP/TL-SG1016PE/TL-SG1218MP/TL-SG1218MPE/TL-SG1428PE is also a Power Sourcing
Equipment (PSE*). The RJ45 port 1–8 on TL-SG1008MP and TL-SG1016PE, 10/100/1000 Mbps
RJ45 por t 1–16 on TL-SG1218MP and TL-SG1218MPE, and 10/100/1000 Mbps RJ45 port 1–24 on
TL-SG1428PE support the Power over Ethernet (PoE*) function, which can automatically detect and
supply power to those powered devices (PDs*) complying with IEEE 802.3af and IEEE 802.3at.
Note:
■
*PSE is a device (switch or hub for instance) that will provide power in a PoE setup.
■
*PoE is a technology that describes a system to transmit electrical power, along with data, to
remote devices over standard twisted-pair cable in an Ethernet network.
■
*PD is a device powered by a PSE and thus consumes energy. Examples include powering
IP telephones, wireless LAN access points, network cameras, network hubs, embedded
computers, and so on.
1.2 Appearance
■
Front Panel
The front panel of TL-SG1008 is shown as the following figure.
Figu re 1-1 Front Panel of T L-SG1008
TL-SG1008 8-Port Gigabit Switch
Link
Act
123456 7 8
1000Mbps
LEDs
Power
123456 7 8
10/100/1000 Mbps
RJ45 Port
The front panel of TL-SG1008MP is shown as the following figure.
Figu re 1-2 Front Panel of T L-SG1008MP
10/100/1000 Mbps RJ45 PortLEDs
Introduction
1
Unmanaged/Easy Smart Rackmountable Switches
The front panel of TL-SF1016 is shown as the following figure.
Figu re 1-3 Front Panel of T L-SF1016
LEDs
10/100 Mbps
RJ45 Port
The front panel of TL-SF1016DS is shown as the following figure.
Figu re 1-4 Front Panel of T L-SF1016DS
LEDs
10/100 Mbps
RJ45 Port
The front panel of TL-SG1016 is shown as the following figure.
Figu re 1-5 Front Panel of T L-SG1016
LEDs
10/100/1000 Mbps
The front panel of TL-SG1016D is shown as the following figure.
Figu re 1-6 Front Panel of T L-SG1016D
RJ45 Port
2
Introduction
LEDs
10/100/1000 Mbps
RJ45 Port
Unmanaged/Easy Smart Rackmountable Switches
The front panel of TL-SG1016S is shown as the following figure.
Figu re 1-7 Front Panel of T L-SG1016S
LEDs
10/100/1000 Mbps
RJ45 Port
The front panel of TL-SG1016DE is shown as the following figure.
Figu re 1-8 Front Panel of T L-SG1016DE
Reset 10/100/1000 Mbps RJ45 Port
LEDs
The front panel of TL-SG1016PE is shown as the following figure.
Figu re 1-9 Front Panel of T L-SG1016PE
Reset 10/100/1000 Mbps RJ45 PortLEDs
The front panel of TL-SF1024 is shown as the following figure.
Figu re 1-10 Front Panel of T L-SF1024
LEDs
10/100 Mbps
RJ45 Port
Introduction
3
Unmanaged/Easy Smart Rackmountable Switches
The front panel of TL-SF1024D is shown as the following figure.
Figu re 1-11 Front Panel of T L-SF1024D
LEDs
10/100 Mbps
RJ45 Port
The front panel of TL-SG1024 is shown as the following figure.
Figu re 1-12 Front Panel of T L-SG1024
LEDs
10/100/1000 Mbps
RJ45 Port
The front panel of TL-SG1024D is shown as the following figure.
Figu re 1-13 Front Panel of T L-SG1024D
LEDs
10/100/1000 Mbps
RJ45 Port
The front panel of TL-SG1024S is shown as the following figure.
Figu re 1-14 Front Panel of T L-SG1024S
4
Introduction
LEDs
10/100/1000 Mbps
RJ45 Port
Loading...