Toyota BLU Logic User Manual

USER MANUAL

HANDSFREE COMMUNICATION

USER MANUAL

HANDSFREE COMMUNICATION

L

G

TM

HA N DS F RE E SO L UT I O NS

BLU

O

I

C

L

G

TM

H AN D S FR E E S O LU T IO N S

BLU

O

I

C

FCC Warning:

Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.

Caution:

This equipment complies with FCC radiation exposure limits set forth for uncontrolled
equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement Cto
OET65. This equipment has very low levels of RF energy that it deemed to comply without
maximum permission exposure evaluation (MPE). But it is desirable that it should be
installed and operated with at least 20 cm and more between the radiator and person’s body
(excluding extremities: hands, wrists, feet and legs).

Co-location:

This transmitter must be not co-located or operated in conjunction with any other antenna or
transmitter.

Be Safe. When using a handsfree cellular device in a vehicle, the vehicle operator is solely
responsible for operating the vehicle in a safe manner. Vehicle operators must maintain
full surveillance of all pertinent driving conditions at all times. An accident or collision
resulting in damage of property, personal injury, or death could occur if the operator of the
vehicle fails to pay attention to travel conditions and vehicle operation while the vehicle is
in motion. Cellular device use limits vary by state, province or locality. Obey all laws while
driving.

DO NOT program, attempt to program, adjust, or set up your BLU Logic unit while the
vehicle is moving. Your vehicle should be in park with ignition turned to the on or “acc”
(accessory) position.

DO NOT program, attempt to program, adjust, or set up you BLU Logic unit while the
vehicle is inside and the engine is on.

Failure to follow the precautions could result in property damage, serious injury, and death
of yourself, pets or other people near the vehicle from carbon monoxide (for example, if the
vehicle’s engine is running in a garage with the garage door closed), or from physical impact
(if the vehicle should slip out of park and into gear with the engine running).

r CAUTION

!

Quick-Start Guide.........................................................................2

Pairing Guide.................................................................................3

Pairing Trouble Shooting.........................................................3

Operation.......................................................................................4

Connection..............................................................................4

Connection Priority.................................................................4

Dial..........................................................................................4

Reject a Call.............................................................................4

Private Call..............................................................................4

Disconnect from Kit................................................................4

Volume Control.......................................................................5

Sound Quality..........................................................................5

Specifi cations.................................................................................6

Handsfree Specifications Version 2.1 + EDR; Class 2, 10 Meters/ 3 ft.

Handsfree Profile Supported HSP1.1, HFP1.5, A2DP & AVRCP Profiles

Operating Frequency Band 2.402 to 2.480GHz unlicensed ISM band

Multi-Pairing Up to 7 Handsfree devices

Handsfree DSP Full Duplex, Noise Reduction, Echo Cancellation

Power supply voltage range DC 9 ~ 25 volts

Working temperature

-25 ஂC ~ 75 ஂC / -13ஂF~ 167ஂF

Storage temperature

-35 ஂC ~ 85 ஂC / -31ஂF~ 185ஂF

Current consumption In Operation:

ACC ON (during conversation)
100mA ~2A(Max)/DC 12V

In Standby Mode:
ACC ON (standby mode) 10mA(Max)/DC 12
ACC OFF < 1mA

Microphone

(including amplifying circuit)

Category: Omni Directional
Sensitivity: -56dB ± 2dB tolerance
SN ratio: >55dB (Min)
Frequency response: Tuned to optimize voice
response from 200Hz - 3kHz

Amplifier output
(loudspeaker)

Output power: 10W Peak
Impedance: 4 Ohm
Max output current: 3A
Max undistorted amplitude: 10Vpp

Mute mode Active Low Mute

Sink current: 40mA @ 0.5V

Dimensions (L/W/H) 134.5 x 81 x 30 mm / 5.26” x 3.19” x 1.18”

Revision 12.19.08

Product Specifications

1 6

Index

FCC ID: V2M780XXX0000
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.