TOSHIBA TD62304P, TD62304AP, TD62304F, TD62304AF, TD62305P Technical data

TD62304,305P/AP/F/AF

TOSHIBA BIPOLAR DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC

TD62304P,TD62304AP,TD62304F,TD62304AF

TD62305P,TD62305AP,TD62305F,TD62305AF

7CH LOW ACTIVE DARLINGTON SINK DRIVER

The TD62304P/AP/F/AF and TD62305P/AP/F/AF are non−inverting transistor arrays, which are comprised of eight NPN darlington buffer-transistor output stages and PNP input stages.

These devices can be operated by source input voltage and are suitable for operations with a 5-V general purposed logic IC such as 5-V TTL, 5-V CMOS and 5-V Microprocessor which have sink current output drivers.

Please observe the thermal condition for using.

FEATURES

lOutput current (single output) 500 mA (Max.)

lHigh sustaining voltage 35 V (TD62304P/F, 62305P/F) 50 V (TD62304AP/AF, 62305AP/AF) (Min.)

lLow level active input

lInput compatible with 5-V TTL and 5-V CMOS

lPackage type-P, AP: DIP-16 pin

lPackage type-F, AF: SOP-18 pin

PIN CONNECTION (TOP VIEW)

Weight

DIP16−P−300−2.54A : 1.11 g (Typ.)

SOP16−P−225−1.27 : 0.16 g (Typ.)

SCHEMATICS (EACH DRIVER)
TD62034P/AP/F/AF	TD62305P/AP/F/AF

Note: The input and output parasitic diodes cannot be used as clamp diodes.

1	2001-07-16

TD62304,305P/AP/F/AF

MAXIMUM RATINGS (Ta = 25°C)

CHARACTERISTICS			SYMBOL	RATING	UNIT
Supply Voltage			VCC	−0.5~7.0	V
		P, F		−0.5~35
Output Sustaining Voltage			VCE (SUS)		V
		AF		−0.5~50
		AP		−0.5~50
Output Current			IOUT	500	mA / ch
Input Voltage			VIN	−22~VCC +0.5	V
				−0.5~7 (Note 1)
Input Current			IIN	−10	mA
		P		1.0
Power Dissipation			PD		W
		AP		1.47
		F, AF		0.625 (Note 2)
Operating Temperature		P	Topr	−30~75	°C
				−40~85
Storage Temperature			Tstg	−55~150	°C

Note 1: TD62305P / AP / F / AF

Note 2: On glass epoxy PCB (30 × 30 × 1.6 mm Cu 50%)

2	2001-07-16

TD62304,305P/AP/F/AF

RECOMMENDED OPERATING CONDITIONS

(Ta = −40~85°C and Ta = −30~75°C for only Type−P)

	CHARACTERISTIC			SYMBOL	CONDITION	MIN	TYP.	MAX	UNIT
	Supply Voltage			VCC	―	4.5	5.0	5.5	V
			P, F			0	―	35
	Output Sustaining Voltage			VCE (SUS)	―				V
			AF			0	―	50
			AP			0	―	50
					DC 1 Circuit	0	―	350
			P		Tpw = 25 ms, duty = 10%	0	―	300
					7 circuits
	Output Current			IOUT					mA / ch
					Tpw = 25 ms, duty = 10%	0	―	350
					7 circuits
			AP
					Tpw = 25 ms, duty = 20%	0	―	200
					7 circuits
	Input Voltage	TD62304P / AP / F / AF		VIN	―	−20	―	VCC	V
		TD62305P / AP / F / AF				0	―	5.5
			P		―	―	―	0.44
	Power Dissipation			PD					W
			AP		―	―	―	0.52
			F, AF		(Note 1)	―	―	0.325

Note 1: On glass epoxy PCB (30 × 30 × 1.6 mm Cu 50%)

ELECTRICAL CHARACTERISTICS (Ta = 25°C)

				TEST
	CHARACTERISTIC		SYMBOL	CIR−	TEST CONDITION			MIN	TYP.	MAX	UNIT
				CUIT
		P / F					VOUT = 35 V
	Output Leakage		ICEX	1	VCC = 5.5 V		Ta = 75°C	―	―	−100	µA
	Current						VOUT = 50 V
					VIN = 0 V
							Ta = 85°C
	Output Saturation Voltage		VCE (sat)	2	VCC = 4.5 V		VIN = VIN (ON)	―	1.4	2.0	V
					IOUT = 350 mA		MAX.
		(Output On)	IIN (ON)	3	VCC = 5.5 V, VIN = 0.4 V			―	−0.32	−0.45	mA
	Input Current				VCC = 5.5 V, VIN = −20 V			―	―	−2.6
		(Output Off)	IIN (OFF)	4		―		―	―	−40	µA
		TD62304						―	―	VCC
	Input Voltage		VIN (ON)	5		―				−2.8	V
	(Output On)
		TD62305						―	―	VCC
										−3.7
	Supply Current	(Output On)	ICC (ON)	6	VCC = 5.5 V, VIN = 0 V			―	17	22	mA
		(Output Off)	ICC (OFF)	6	VCC = VIN = 5.5 V			―	―	100	µA
		P, F					VOUT = 35 V
	Turn−On Delay		tON				RL = 87.5 Ω	―	0.1	―
		AP, AF					VOUT = 50 V
				7	VCC = 5 V,		RL = 125 Ω				µs
		P, F			CL = 15 pF		VOUT = 35 V
	Turn−Off Delay		tOFF				RL = 87.5 Ω	―	3	―
		AP, AF					VOUT = 50 V
							RL = 125 Ω

3	2001-07-16