INSTALLATION MANUAL FILTER KIT FOR UNDERSIDE
Model:TCB-FK281BE, FK501BE, FK801BE, FK1401BE
1. COMPONENT PARTS
Parts name |
TCB-FK281BE |
TCB-FK501BE |
TCB-FK801BE |
TCB-FK1401BE |
|
|
|
|
|
Back cover |
1 |
1 |
1 |
1 |
|
|
|
|
|
Filter guide |
1 |
1 |
1 |
1 |
|
|
|
|
|
Air filter |
1 |
1 |
2 |
2 |
|
|
|
|
|
Clamp |
2 |
2 |
4 |
4 |
|
|
|
|
|
Stepped screw |
2 |
2 |
4 |
4 |
|
|
|
|
|
Installation manual (this) |
1 |
1 |
1 |
1 |
|
|
|
|
|
2. INSTALLATION PROCEDURE
(1)Remove the standard filter chamber on the rear of the air conditioner. (Fig.1)
(2) Remove the under side cover on lower parts of the air conditioner. (Fig.1)
*In order to use later, keep the removed fixing screws so that it may not lose.
(3)Fix the back cover on the air conditioner, using the kept screws. (Fig.2)
(4)Fix the filter guide on lower parts of the air conditioner, using the kept screws.
The screws are fixed the back cover and the side cover on either side, respectively.
(5)Attach the air filter of one or two pieces according to the air conditioner type.
•Furthermore, the back suction system can be changed into underside suction system by attaching the optinal canvas and optinal ceiling panel.
(Fig.1)
Standard filter chamber
Underside cover
Side cover |
(Fig.2) |
Back cover (accessory)
Filter guide (accessory)
Air filter (accessory)
Suction canvas (optional)
Ceiling panel (optional)
3. Mounting of clamp (Accessory)
In order to avoid falling of the air filter, be sure to mount the attached clamps with stepped screws. (0071BH to 0181BH Q’ty:2pcs, 0241BH to 0561BH Q’ty:4pcs)
• Clamp mounting |
• Removal of air filter |
|||
|
|
|
|
|
Clamp
Stepped screw |
Pull out filter downward |
while holding the frames. |
EH99611401