Taylor C822 User Manual

Item No.

C822

Electric Two-Sided Grill

Features

One touch menu selection automatically provides accurate
TIME, TEMPERATURE, and GAP settings for every product.

Programmable Controls

Microprocessor controls are programmable for simplified operator operation.
Offers flexibility for future menu items and product specification changes at
the restaurant level.

External USB Port

External USB port allows user access to upload new menu and promotional
items. Menu changes can be sent electronically to other store locations
saving time and eliminating operator error.

Upper Platens

Upper platen will close automatically to the preset gap setting with the
touch of one button. Air cylinder system provides quiet, simple, trouble-free
operation of the upper platen. As a safety feature, platen will automatically
open at loss of power, or if an obstruction is detected.

C822

Precise Automatic Gapping

Solid platform with 3-point reference plane and fixed (home) reference point.
Once programmed, the upper platen automatically achieves accurate and
consistent gaps, every time. Precise, repeatable gapping assures product
safety and better quality finished product.

Cooking Zones

Two separately controlled cooking zones. Each zone has three independent
heating elements, and two in the upper platen to assure even temperatures
and quick recovery.

Side-To-Side Release Material

Protects entire upper platen cooking surface and makes cleaning easy.
Improved installation and removal process away from hot surfaces.

Patty Cook Position Placement Guide

Lower cooking surface is etched for a permanent patty placement guide for
two-sided cooking.

Rockton, Illinois 61072

800-255-0626

Phone [phone] Fax [phone]

www.taylor-company.com

e-mail: [e-mail]

International Office
Taylor Company S.r.l.
Roma, Italy
Tel: [phone] Fax: [phone]
e-mail: [e-mail]

C822 Electric Two-Sided Grill



C822

Weights lbs. kgs.

Net 573 259.9
Crated 654 296.6

cu. ft. cu. m.

Volume 53.7 1.52

Dimensions in. mm.

Width 28-3/16 716
Depth 38-5/8 980
Height 50-1/2 to 55-1/2 1282.7 to 1409.7
Floor Clearance 7 to 12 177.8 to 304.8

Casters may be adjusted.

Electrical Amps Cord Supplied
with NEMA Plug

208/60/3 43 NEMA15-60P

This unit may be manufactured in other electrical characteristics. Refer to
the local Taylor Distributor for availability.
(For exact electrical information, always refer to the data label of the unit.)

Bidding Specs
Electrical: Volt Hz ph
Neutral:

Yes No Cooling:  Air Water NA

Specifications

Electrical

One dedicated electrical connection is required. See the Electrical chart for the
proper electrical requirements. Manufactured to be permanently connected.
Consult your local Taylor distributor for receptacle specifications as local codes
allow.

Accessories

• Two; side grease cans

• One box of 9 release sheets; includes clips and retainer

• One Squeegee

• Grill Cleaner (1qt)

Options

• Cleaning Pads (10 qty.)

• Gap Gage (0.255)

• Grill Scraper

• Cleaning Pad Holder

• Tool Holder

Options:

Continuing research results in steady improvements; therefore, these

specifications are subject to change without notice.

Taylor Company,

Rockton, Illinois 61072
815-624-8333 800-255-0626 Fax [phone]

www.taylor-company.com

073884-ADV

2/12