Soundcraft TASCAM DTRS USER GUIDE
0dBFS = 18dBu
0
2
4
6
8
10
12
14
16
18
21
24
27
30
35
40
MIX
dBFS
RIGHT
STE-2STE-1
EXIT
FUNCTION
PARAMETER
STEREO INPUTS
SELECT
MUTE
U
IN
AES/EB
OUT
S/PDIF
IN
OUT
ORD/SUPER
W
CLOCK
IN
D
OR
W
CLOCK
OUT
SOLO
IN
MIDI
OUT
RU
TH
XDX D
328
XD
TASCAM DTRS
CHANNEL
GROUP LINK
/
328XD AND
328XD AND
328XD AND328XD AND
TASCAM DTRS
TASCAM DTRS
TASCAM DTRSTASCAM DTRS
Connecting the system 2
328XD Configuration 4
DA78HR Configuration 6
DA88 Configuration 7
DA98 / DA98HR Configuration 8
Additional Information 10
Soundcraft 328XD and Tascam DTRS
1111
CONNECTING THE SYSTEM
Audio Connections
Connect audio connections as shown in the diagram below. A Tascam TDIF cable must be connected
from the TDIF port of the DTRS machine to the TDIF Port 17-24 of the 328XD.
The TDIF connection allows two way digital transfer between the 328XD and the Tascam DTRS. The
outputs of the 328XD can be configured to be either direct outputs for input channels 1-8 to the DTRS, or
the 328XD’s 8 Group outputs.
Synchronization Connections
Besides the audio connections, a BNC Wordclock cable must be connected from the 328XD Wordclock
Out to the DTRS Wordsync Input to synchronize the transmission of the samples.
NOTE:
If MIDI Timecode (MTC) and MIDI Machine Control (MMC) are to be used to transmit timecode,
transport controls and record arming, it is essential that and SY-88 board is fitted to a DA-88.
A MIDI cable must be connected from the 328XD MIDI Out to the SY-88 MIDI In and a MIDI
cable must be connected from the SY-88 MIDI Out to the 328XD MIDI In.
2222
Soundcraft 328XD and Tascam DTRS
To summarize, the connections required are as follows:
BNC Wordclock cable:
Î
328XD Wordclock out
DTRS Wordsync In
MIDI Cables:
328XD MIDI Out
DTRS MIDI Out (if present)
Î
DTRS MIDI In (if present)
Î
328XD MIDI In
Tascam TDIF Cable:
328XD 8 Track A TDIF
Î
DTRS TDIF Port
Soundcraft 328XD and Tascam DTRS
3333
Loading...