Silvercrest SSW 1100 A1 User Manual [fi]
KITCHEN TOOLS
3
Electric Hot Tray SSW 1100 A1
Electric Hot Tray
Operating instructions
Elektroninen lämpöalusta
Käyttöohje
KOMPERNASS GMBH
BURGSTRASSE 21 · D-44867 BOCHUM
www.kompernass.com
ID-Nr.: SSW1100A1-05/10-V1
Elektrisk värmeplatta
Bruksanvisning
Elektrische Warmhalteplatte
Bedienungsanleitung
Elektrisk varmeplade
Betjeningsvejledning
SSW 1100 A1
4
1
432
76 5
ELECTRIC HOT TRAY 2
Read the operating instructions carefully before using the appliance for the first time and
preserve this booklet for later reference. Pass the manual on to whomsoever might acquire
the appliance at a later date.
ELEKTRONINEN LÄMPÖALUSTA 6
Säilytä käsikirja myöhempää käyttöä varten. Jos myyt laitteen, anna käsikirja uudelle
omistajalle!
ELEKTRISK VÄRMEPLATTA 9
Spara den här anvisningen för senare frågor – och överlämna den tillsammans med
apparaten om du överlåter den till någon annan person!
ELEKTRISK VARMEPLADE 12
Læs betjeningsvejledningen igennem før første brug, og opbevar den til senere brug.
Lad vejledningen følge med, hvis apparatet gives videre til andre.
ELEKTRISCHE WARMHALTEPLATTE 15
Lesen Sie die Bedienungsanleitung vor der ersten Verwendung aufmerksam durch und
heben Sie diese für den späteren Gebrauch auf. Händigen Sie bei Weitergabe des
Gerätes an Dritte auch die Anleitung aus.
- 1 -
ELECTRIC HOT TRAY
Intended use
This appliance is designed for keeping food warm
in domestic households and is only to be utilised in
dry rooms.
This appliance is not intended for the warming or
heating up of foodstuffs or other materials directly
on the hotplate.
This appliance is NOT intended for use in commercial or industrial applications or for use outdoors.
Safety information
To avoid potentially fatal electric
shocks:
Ensure that the appliance, the power cable and
the power plug are NEVER submersed in water
or other fluids.
• Connect the appliance only to electrical sockets
supplying a level of energy that complies with the
details on the rating plate.
• Ensure that the power cable never becomes wet
or damp during operation. Lay the cable so that
it cannot be clamped or damaged in any way.
• Always remove the power plug from the wall socket
after use.
Simply switching the appliance off is not sufficient,
as the appliance is under power for as long as
the plug is connected to the socket.
• Protect the food warmer from damages: The
appliance may not be taken into use if the food
warmer is damaged in any way.
In this case, immediately remove the plug from
the wall socket and arrange for the appliance to
be repaired.
• To avoid unnecessary risks, in the event of damage
to the plug and/or the power cable arrange for
it/them to be exchanged as soon as possible.
To avoid the risks of fire or injury:
• NEVER touch the hotplate when the appliance is
in use. It can get very hot.
• Overheated foodstuffs could begin to burn!
Never let the appliance work without supervision.
• Additionally, NEVER position the appliance below
inflammable objects, especially not below curtains,
drapes or hanging cupboards.
• NEVER attempt to warm-up tightly sealed containers.
Due to heat expansion the container could explode.
• This appliance is not intended for use by individuals
(including children) with restricted physical, physiological or intellectual abilities or deficiences in
experience and/or knowledge unless they are
supervised by a person responsible for their safety
or receive from this person instruction in how the
appliance is to be used.
• Children should be supervised to ensure that they
do not play with the appliance.
• When it is in use, take hold of the appliance
ONLY with the grips.
• Do not use an external timing switch or a separate
remote control system to operate the appliance.
Attention! Hot surfaces!
Items supplied
Electric hot tray
Power cable
Operating instructions
Technical data
Voltage : 220 - 240V~50Hz
Power consumption : 1100 W
- 2 -
Appliance description
1 Hotplate
2 Power cable
3 Connection socket
4 Grip
5 On/Off switch
6 Control lamp “Mains power connected”
7 Control lamp “Ready for use”
• Position the On/Off switch 5 at “On” (--).
As soon as the appliance has reached its highest
temperature the control lamp “Ready for use” 7
glows.
• Position the On/Off switch 5 at “O”.
• First remove the plug from the wall power socket
and then the plug from the connection socket 3
on the appliance. The appliance is now independant from mains power and retains its heat
for approx. one hour.
First implementation
• Remove all packaging materials from the appliance
and then clean it as described in the chapter
“Cleaning and Care”.
• Place the appliance on a dry, flat and heat-resistant
surface.
• Warm the appliance up as described in the chapter
“Utilisation”.
Note:
On the first usage, a slight odour can occur (minimal
smoke development is also possible). This is normal
and stops after a short time. Provide for sufficient
ventilation. For example, open a window.
• Remove the plug from the wall power socket.
Utilisation
• Place the appliance on a dry, flat and heat-resistant
surface.
• First insert the plug of the power cable 2 into
the connection socket 3 and then connect the
power cable 2 with a wall power socket. The
control lamp “Mains power connected” 6 glows.
Risk of Burns!
Take hold of the food warmer ONLY by means of
the grips 4 provided on it. The other appliance
parts will be very hot!
• Place the food warmer at the place where you
wish to use it.
Note:
You can also leave the appliance connected to
mains power after it has been warmed up.
It could then happen that, during use, the control
lamp “Ready for use” 7 briefly extinguishes itself
and then glows once again. This indicates that the
set temperature had fallen and the appliance had
warmed itself back up.
Cleaning and Care
Attention!
Before cleaning, ALWAYS remove the plug from the
wall power socket! There is a risk of receiving an
electric shock!
Allow the appliance to cool down completely before
cleaning it. There is a danger of being burnt!
Do not use abrasive, aggressive or chemical cleaning
agents. These could damage the upper surfaces of
the appliance.
- 3 -
NEVER submerse the appliance in water or
other liquids.
• Wipe the appliance with a damp cloth. For stubborn
soiling use a mild detergent on the cloth.
• The hotplate 1 can, if required, be cleaned with
a special stainless steel cleaning agent.
• Wipe off any possibly remaining cleaning agent
residues with a damp cloth.
• Dry the appliance thoroughly before reusing
it or putting it into storage.
Disposal
Do not dispose of the appliance in your
normal domestic waste. This product is
subject to the provisions of European
Directive 2002/96/EC.
Dispose of the appliance through an approved disposal
centre or at your community waste facility.
Observe the currently applicable regulations.
In case of doubt, pleasecontact your waste disposal
centre.
Storage
Store the appliance at a clean and dry location.
Attention!
To avoid potential damage to the appliance, do not
place any heavy objects on the hotplate 1 when it
is in storage.
Dispose of the packaging materials in an
environmentally responsible manner.
- 4 -
Loading...