Schneider Electric i2810 Series Local Specification Sheet

Andover ContinuumTM
Infinet II

i2810 Series Local

The i2810 Series controllers are designed for control of Air Handling
Units, Roof Top Units, and other mechanical plant equipment.

Andover Continuum Infi net II
i2810 Series Local Controllers
Features

PRODUCT AT A GLANCE

• Powerful , Flexib le Loca l Controlle r for th e

Most Demanding Applications

• Expandable I/O Meets Additional Point

Count Needs

• Non-Vola tile Fl ash Mem ory Prov ides U tmost

Reli ability — Stor es Both Applic ation P rogram

and Operating System

• Optional Display/Keypad Provides Easy

Operator Interface (Mounted Separately)

• Local, Extended Storage of Log Data

• View and Mo dify In formatio n with Optional

Smart Sensor Display

• Local, On-Board Service Port

02

Choose the i2810 model with the
confi guration that matches your application:

•

The i2810, designed for stand-alone equipment
control of Roof Top Units, Air Handling Units, or
other packaged mechanical equipment, features
eight universal inputs, one Smart Sensor/Room
Sensor input, plus eight program-controlled
digital outputs.

• The i2814, designed for stand-alone equipment

control of Roof Top or Air Handling Units, features
eight universal inputs, one Smart Sensor/Room
Sensor input, plus four program-controlled digital
outputs and four analog outputs for direct control
of devices requiring 0-10 volt control signals.

Note: The i2814 is only compatible with Andover
Continuum.

Both models feature an additional room sensor
input, which supports Andover Continuum Smart
Sensor, or any standard room temperature sensor.
The i2810 Series also features universal inputs, a
real-time clock, override switches on all outputs,
two-piece removable connectors, and the ability to
expand the I/O for additional points.

The i2810 Series features Flash memory, increased
user memory, and a fast (32-bit) processor for faster
scan times, with plenty of memory available for data
logging of your critical data.

The i2810 communicates with the entire Andover
Continuum Infi net RS-485 fi eld bus (i.e. both
Andover Continuum Infi net and Andover Continuum
Infi net II controllers) and is compatible with both
the Andover Continuum CyberStation and Infi nity
SX 8000 front-ends. The i2814 is only compatible
with Andover Continuum. Up to 254 Andover
Continuum Infi net devices can be networked to any
Andover Continuum network controller.

S

chneider Electric

SDS-I2810-A4.BU.N.EN.11.2007.0.00.CC

Andover Continuum Infinet II
i2810 Series Local Controllers

03

Features

(continued)

Increased Reliability with Flash Memory

The i2810’s non-volatile Flash memory stores your
operating system and application programs, so that
in the event of a power loss, your application will
be restored when power is returned. In addition,
the Flash memory allows for easy upgrades of
your operating system via software downloads,
eliminating the need to swap out proms.

The i2810 controllers include an on-board battery to
safeguard your runtime data — protecting all point
data and log data from being lost if power
is removed.

Inputs

The input configuration on the i2810 Series consists
of eight full range, 12-bit universal inputs that accept
voltage (0-10VDC), digital (on/off), counter signals
(up to 4Hz), temperature signals, or supervised
alarm circuits for security applications or broken
wire detection. The i2810 Series offers an additional
input to support the Andover Continuum Smart
Sensor, or any standard room temperature sensor.

Dimensional Drawings

1

2

4

3

Outputs

The i2810 contains eight Form C relay outputs, each
rated for 24 VAC/30 VDC, 3 amp, while the i2814
contains four Form C relay outputs and four analog
outputs (0-10V). Both the relay and analog outputs
have manual override switches, with software
feedback of the switch position.

I/O Expansion

The i2810 contains an I/O expansion port for
the addition of up to two Andover Continuum xP
expansion modules directly on the bottom of the
controller. The xP family of modules includes the
xPUI4, xPDI8, xPDO2, xPDO4, xPAO2, and xPAO4.
In addition to two input/output modules, the I/O bus
supports the xP Local Display Module, which allows
the user to view and change point values.

Schneider Electric

SDS-I2810-A4.BU.N.EN.11.2007.0.00.CC

Andover Continuum Infinet II

B

3

2

1

AC PO WER

24 VAC
30 VA
50/6 0 HZ

L

N

+

DC PO WER

12-28 V DC
20W

REV:

B

4

5

6

SHLD

+

-

RS-4 85

TD

3

2

1

AC POWER

24 VAC
30 VA
50 /6 0 HZ

L

N

+

DC POWER

12-28 VDC
20 W

PLACARD, INPUT,

I2814 / I2810

05-1001-223

TITLE:

P/N:

REV:

DATE:

1 OF 1

DRAWN BY:

B

11/3/04M.ROGERS

SHEET:

FULL

ECO #11244

SCALE:

SOFTWARE: ECO NUMBER:

ADOBE ILLUSTRATOR 10.0

21

19

20

7 RE T

8 IN 1

9 IN 2

10

RET

11 IN 3

12 IN 4

13 RET

14 IN 5

15 IN 6

16 RET

17 IN 7

18 IN 8

RET

IN 9

SPWR

SMART

SENSOR

UNIVERSAL
INPUTS

1
2
3

6

5

4

8

7

OFF

ON

SERVICE
PORT

4

5

6

SHLD

+

-

RS-4 85

R

D

TD

RESTART

CPU

3

2

1

AC POWER

24 VAC
30 VA
50 /6 0 HZ

L

N

+

DC POWER

12-28 VDC
20 W

40

36

45

44

43

42

41

39

38

37

35

34

1

2

28

24

33

32

31

30

29

27

26

25

23

22

3

4

I

V

GND

5

I

V

GND

6

I

V

GND

7

I

V

GND

8

40

36

45

44

43

42

41

39

38

37

35

34

1

2

3

4

28

24

33

32

31

30

29

27

26

25

23

22

5

6

7

8

i2810 Series Local Controllers

04

Features

(continued)

Software Capabilities

The dynamic memory of the i2810 can be allocated
for any combination of programs, scheduling,
alarming, and data logging using the powerful
Andover Continuum Plain English programming
language. Our object-oriented Plain English
language with intuitive keywords provides an
easy method to tailor the controller to meet your
exact requirements. Programs are entered into the
i2810 using the Andover Continuum CyberStation.
Programs are then stored and executed by the
i2810 controllers.

Programming multiple i2810 Series controllers is
inherently easy with Plain English. A complete copy
of one i2810 controller’s programs can be loaded
directly into other i2810 controllers without changing
any point names or programs.

Smart Sensor Interface

The i2810 provides a built-in connection for Andover
Continuum Smart Sensor. The Smart Sensor
provides a 2-character LED display and a 6-button
programmable keypad that enables operators and
occupants to change setpoints, balance VAV boxes,
monitor occupancy status, and turn equipment on
and off. An enhanced version of the Smart Sensor
is also available with a 4-digit custom LCD that
provides the following icons: PM, %, °, Setpoint,
Cool, Heat, CFM, Fan, OA, and SP.

Local Display

The local display with keypad (xP-Display) allows for
the addition of a fully programmable local display
module that can be mounted within 10 feet (3
meters) of the controller. Connected via a ribbon
cable, the xP-Display easily allows the Operator
Interface to be mounted on the door of an enclosure
or on a wall below or next to the controller.

Optional Wireless Andover Continuum Infinet

The i2810 Series Andover Continuum Infinet
controllers can also communicate using a wireless
mesh network. Simply plug Andover Continuum
Wireless Adapters into the service ports of these
controllers with wireless compatible firmware to
create a wireless mesh network that sends and
receives Andover Continuum Infinet messages.

Sc

SDS-I2810-A4.BU.N.EN.11.2007.0.00.CC

hneider Electric

Dimensional Drawings

1

Power Drawing

2

Communi cation

Drawing

Smart S ensor and

3

Inputs D rawing

i2810

Outputs D rawing

4

i2814

Andover Continuum Infinet II
i2810 Series Local Controllers
Specifications

i2810 Series Local Controllers

05

Electrical

Power

24VAC, 12-24VDC - auto sensing,

+10% -15%, 50/60 Hz

Power Consumption

30 VA

Overload Protection

Fused with 3 amp fuse.

MOV protected

Real-Time Clock

Battery-backed real-time clock

Mechanical

Operating Environment

32°–120°F (0–49°C),

10–95% RH (non-condensing)

Size

9.51˝ H x 7.26˝ W x 2.14˝ D

(241 H x 184 W x 54 D) mm

Weight

1.65 lbs. (0.75 kg)

Enclosure Type

UL Open class, IP 10.

Flammability rating of UL94-5V

Mounting

Panel mount

Battery

Battery Backup

Replaceable, non-rechargeable,

lithium battery. Provides 5 years

typical accumulated power failure

backup of RAM memory

Communications

Communications Interface

Through Andover Andover Continuum

Infinet RS-485 field bus to network

controller

Communications Speed

1200 to 19.2K baud

Bus Length

4,000 ft. (1,220m) standard for

Andover Continuum Infinet, i2 Infilink

module allows extension to longer distances

and is required after every group of

32 units on the network.

Bus Media

Andover Continuum Infinet: twisted,

shielded pair, low capacitance cable

RS-485 port for implementing Wireless

Infinet II connection, including:

Standard service port, four-position

shrouded connector

Comm. Error Checking

International Standard CRC 16

Compatibility

Andover Continuum Cyberstation

and Infinity SX 8000 systems

Note: The i2814 is compatible with

Andover Continuum software version 1.5

(or later).

Inputs/Outputs

Inputs

8 Universal inputs: Voltage (0-10 VDC);

Temperature -30°F to 230°F (-34°C to 110°C),

Digital (on/off), Counter (up to 4Hz at 50%

duty cycle, 125 ms min. pulse width).

Supervised Alarm (single or double resistor).

Current input (0 - 20 mA) using external 500

ohm resistor

1 Smart Sensor Temperature Input (32°F to

105°F) (0°C to 41°C)

Input Voltage Range

0-10 volts DC

Input Impedance

30.1K ohm to 10V or 5M ohm with

pull-up resistor disabled

Input Resolution

2.5 mV

Input Accuracy

±7.5mV (±0.25°C from -23°C to

+54°C) or (±0.46°F from -10°F to +130°F)

Digital Outputs

8 single pole single throw (SPST) Form C

relays (4 Form C on i2814)

(Any two consecutive Form C outputs can

be configured as one Form K Tri-state)

Output Rating

Maximum 3A, 24VAC/30VDC,

±1500V transients (Tested according

to EN61000-4-4)

Output Accuracy

0.1 sec. for pulse width modulation

hneider Electric

Sc

SDS-I2810-A4.BU.N.EN.11.2007.0.00.CC

Andover Continuum Infinet II
i2810 Series Local Controllers

06

Specifications

(continued)

i2810 Series Local Controllers

Analog Outputs

4 analog outputs (i2814 only)

Output Rating

For 0-10V: 5mA maximum,

2K ohm minimum impedance,

±1000V transients (Tested according to

EN61000-4-4). Fuse-protected

only on the i2814

Output Resolution

0.1V for 0-10V

Output Overrides

Each output is equipped with a manual

override switch. Software feedback

of the switch position is provided,

for display and alarming

Expansion Bus

Interfaces to optional xP I/O

Expansion Modules

Connections

Power

3-position fixed screw terminal connector

Inputs

Removable two-piece terminal strip

Outputs

Removable two-piece terminal strip

Smart Sensor

Removable two-piece terminal strip

Communications

Removable 3-position terminal

connector

Expansion Port

6-position shrouded connector

Service Port

4-position shrouded connector

User LEDs/Switches

Status Indicator LEDs

CPU CPU Active

TD Transmit Data

RD Receive Data

Output Output Status (per

output) (Digital only)

EXPANSION

PORT PWR Power Status

Switches

RESET

Input Pull-up Resistor Switch (per input)

Individual Output Override Switches

General

Memory

256K SRAM, 1MB FLASH

Processor

Motorola 32-Bit Coldfire

Agency Listings

UL/CUL 916, FCC CFR 47 Part 15,

ICES-003, EN55022, ASIN2S 3548,

Class A, CE

Models

i2810

Infinet II i2810 Local Controller

i2810-WL

Wireless Infinet II i2810 Local Controller

i2814

Infinet II i2814 Local Controller

i2814-WL

Wireless Infinet II i2814 Local Controller

All brand names, trademarks and registered trademarks are the property of their respective owners. Information contained within this document is subject to change
without notice.

On October 1st, 2009, TAC became the Buildings Business of its parent company Schneider Electric. This document reflects the visual identit y of Schneider Electric,
however there remains references to TAC as a corporate brand in the body copy. As each document is updated, the body copy will be changed to reflect appropriate
corporate brand changes.

Sc

hneider Electric

SDS-I2810-A4.BU.N.EN.11.2007.0.00.CC

November 2007 pdw

© 2007-20 09 Schneider Electric. All rights reserved.