Sanyo MLR-351H Manual

Plant Growth/Environmental Chambers - MLR-351H

VERSATILE ENVIRONMENTAL TEST CHAMBER

i n c u b a t i o n

MLR-351H

FEATURE BENEFIT

Microprocessor PID

Graphic LCD provides easier operation

Programmable temperature, lighting, and humidity

function

Microprocessor PID Temperature Control.

Data logging function

Easy calibration through controller

Small lightweight, high molecular membrane-type

humidity sensor

Controls temperature and humidity (0 to +50˚C, 0 to 20,000lux and 55 to 90%RH) to create the
optimum environments for various applications.

Programmable
Temperature Function

Automatic Data Logging
of Operational Data

TECHNOLOGY & APPLICATIONS

The wide variety of temperatures, humidity and lighting patterns that are essential in plant research and environmental studies can now
be accurately reproduced and controlled.

APPLICATIONS:

- Plant growth

- Culture of plant cells, tissue, and organs

- Incubation and growing of insects (drosophila)

Microprocessor PID and refrigeration capacity control minimizes temperature fluctuations and thereby improves temperature control.

This allows precise experiments plus energy and electricity savings.

Programming of temperature, light, humidity. Used for small plants, adaptation tests, algae, drosophila, etc.
Programmable temperature function is perfect for temperature cycle and vernalization treatment research.
Easy calibration: temperature and humidity can be calibrated easily through the control panel. Small lightweight, high molecular mem-

brane-type humidity sensor also boasts a high degree of accuracy and reproductability.

Graphic LCD panel with pop-up menu function on control panel provides visual display of operation and allows intuitive operation.

This function can operate 12 step programs x 10 patterns which can be stored, select a clock or timer
mode, Multiple programs can be 'connected' (join mode), and a starting day and time of operation can
be programmed.

Operation data of approximately 2 weeks (6 minute intervals) can be automatically recorded. The
data can be viewed on the control panel. The data can also be transmitted to a PC via RS-232C,
interface board (MTR-480 required).

- Electronic testing

- Food testing

- Packaging testing