HIT photovoltaic module |
HIP-205NKHB5 |
|
HIP-200NKHB5 |
The SANYO HIT ( Heterojunction with Intrinsic Thin layer ) solar cell is made of a thin mono crystalline silicon wafer surrounded by ultra-thin amorphous silicon layers. This product provides the industry's leading performance and value using state-of-the-art manufacturing techniques.
HIT Solar Cell Structure
Ultra-thin amorphous silicon layer
Front-side |
Thin mono |
|
electrode |
||
crystalline |
||
n |
||
silicon wafer |
||
Rear-side |
|
|
electrode |
|
Ultra-thin amorphous silicon layer
Development of HIT solar cell was supported in part by the New Energy and Industrial Technology Development Organization (NEDO).
Benefit in Terms of Performance
The HIT cell and module have very high conversion efficiency in mass production.
Model |
Cell Efficiency |
Module Efficiency |
HIP-205NKHB5 |
18.4% |
16.0% |
|
|
|
HIP-200NKHB5 |
18.0% |
15.6% |
|
|
|
High performance at high temperatures
Even at high temperatures, the HIT solar cell can maintain higher efficiency than a conventional crystalline silicon solar cell.
[Changes in generated power daytime]
outputpower |
0.5 |
|
|
|
|
|
|
Module |
temp.75 |
|
|
|
|
|
|
|
|
c-Si |
|
|
|
|
|||
|
0.8 |
|
approx. |
|
|
|
|
|
|
|
|
|
normalized |
|
|
10%up |
|
|
|
|
|
HIT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
faced to |
south, tilt angle |
30° |
|
|
|
||||
|
|
|
|
Kobe (Japan), 24. July 2007, |
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
5 |
7 |
9 |
11 |
13 |
15 |
17 |
19 |
||||
time
Environmentally-Friendly Solar Cell
More Clean Energy
HIT can generate more clean Energy than other conventional crystalline solar cells.
Special Features
SANYO HIT solar modules are 100% emission free, have no moving parts and produce no noise.The dimensions of the HIT modules allow space-saving installation and achievement of maximum output power possible on given roof area.
NKH205/200
Photovoltaic Module
Loading...