FOLDING LOAD CARRIER PUTK 50 A1
FOLDING LOAD CARRIER
Operating instructions
TRANSPORTKARRE
Bedienungsanleitung
TRANSPORTNA KOLICA
Upute za upotrebu
IAN 277693
GB / CY Operating instructions Page 1
HR Upute za upotrebu Stranica 7
DE / AT / CH Bedienungsanleitung Seite 13
Contents
Introduction ...................................................2
Information about these operating instructions .................................. 2
Proper use .............................................................. 2
Technical details. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Package contents ..............................................3
Use ..........................................................4
Dismantling/storage ............................................5
Maintenance ..................................................5
Cleaning ......................................................6
Disposal ......................................................6
Service .......................................................6
Importer ......................................................6
PUTK 50 A1
GB│CY
│
1 ■
Introduction
Information about these operating instructions
Congratulations!
You have purchased a high-quality product. Familiarise yourself with the product
before using it. To do this, read the following operating instructions thoroughly.
Use the product only as described and for the range of applications specified.
Keep these operating instructions in a safe place. Please, also pass all associated
documents on to any future owner(s).
Proper use
This product is designed exclusively for transporting loads in domestic households.
The product is not designed for use on stairways or steep terrain and is not intended for the transportation of humans or live animals. Commercial or industrial
use is not permitted. No liability will be assumed in cases of improper use.
No liability will be assumed for damage caused by misuse or improper handling,
the use of force or unauthorised modification. The risk shall be borne solely by
the user.
Technical details
Dimensions
Loading surface approx. 23 x 25 cm
Weight
Maximum load 50 kg
Empty weight approx. 1.7 kg
■ 2 │ GB
│
CY
PUTK 50 A1
Safety
■ WARNING! There is a risk of injury and property damage!
Do not route the fastening bungee over sharp edges or corners! It may not be
used for lifting loads! Caution! Do not use the fastening bungee to secure the load!
Do not use the fastening bungee if it is damaged. Pull the fastening bungee tight
but do not overstrain it. Do not stretch the fastening bungee more than the maximum
usable length of 1,000 mm! Keep out of reach of children! Keep your eyes, face
and unprotected body parts out of the way of any possible springback paths!
The fastening bungee may not be used for securing heavy or large (wind-resistant)
loads! Take additional forces into account (wind, brakes, lifting forces).
The fastening bungee is not designed for the sole attachment and securing loads
on vehicles! Use it only for attaching light loads.
■ Check the product before every use to make sure it is in perfect condition.
Do not use the product if it is damaged in any way.
■ If it does not work properly or has been damaged, the product should be
checked immediately and repaired by customer service.
■ This product is not a toy. Keep it out of the hands of children.
■ Do not tie several fastening bungees together.
■ Do not modify the end attachment of the elastic fastening bungee.
■ Never apply a load of more than 50 kg.
■ Do not continue to use the product if it is overloaded. This could lead to damage
that is not immediately visible.
■ Use the product only on smooth, even surfaces, and not on stairways or steep
slopes.
■ Be careful when folding the product. Avoid getting your fingers or hands caught.
■ Check each screw connection at regular intervals.
■ Never use the product for purposes other than those described in these instruc-
tions.
Package contents
▯ Folding load carrier
▯ These operating instructions
NOTE
► Check the package for completeness and signs of visible damage.
PUTK 50 A1
GB│CY
│
3 ■
Use
♦ Undo the elastic fastening bungee and unfold the product until it audibly
clicks into place (see fig. 1).
♦ Press the knob on the handle and pull the telescopic bar out until it clicks
into place (see fig. 2).
WARNING! RISK OF INJURY!
► Do not stretch the fastening bungee more than the maximum usable
length of 1m. Keep your eyes, face and unprotected body parts out
of range of a possible springback.
NOTE
► The fastening bungee must be under tension to ensure that the load is
held in place. Observe the size of the load.
► Never apply a load of more than 50 kg.
♦ Place a load onto the load area. Do not stack multiple loads.
♦ Place the load centrally on the load area.
♦ Secure the load with the fastening bungee (see fig. 3).
♦ Make sure that the fastening bungee is sufficiently tightened so that the load
is firmly held in place.
♦ Also make sure that the fastening bungee is sufficiently tightened even for
small loads (see fig. 4).
♦ Move the product by pulling it behind you on both wheels.
1 2
■ 4 │ GB
│
CY
PUTK 50 A1
3 4
Dismantling/storage
WARNING! RISK OF INJURY!
► Remove any load before converting the product.
► Risk of crushing! A lot of force is required for folding the product. Make
sure that you do not injure yourself. Do not fold the appliance in a jerky
fashion.
♦ Fold the product in reverse order as described in the section Use.
♦ Store the product lying down so that it cannot tip over. Place the product in
a clean, dry place away from direct sunlight.
Maintenance
♦ Check that all the screw connections are sufficiently tightened at regular
intervals.
♦ If necessary, tighten all screw connections manually.
♦ All damaged screw joints should be replaced by a specialist.
PUTK 50 A1
GB│CY
│
5 ■
Loading...