Quick Installation Guide
EPN-402NV
GEPON Wi-Fi ONU
1. Package Contents
Thank you for choosing PLANET EPN-
the router, please verify the following items in the package box.
GEPON Wi-Fi ONU |
Quick Guide |
|
|
|
|
12V / 1A Power Adapter |
Ethernet Cable |
2. Hardware Installation
Step 1: Connect the Power Adapter provided in the package to the EPN-402NV. The Power LED on the front panel will turn on accordingly.
Power
If there is any item missing or damaged, please
contact the seller immediately.
Note
– 1 –
Step 2: Follow the figure below to connect the network devices.
Power
RJ45
PC/Laptop
OLT/
Splitter
–2 –
3.Network Configuration (Windows 7)
A computer with a wired Ethernet connection is required for the first-time configuration of the Wireless Router.
Steps : Set your computer to get an IP address from the Wireless Router:
1.Click “Start” button located in the lower-left corner of the screen.
2.Click “Control Panel”.
3.Double-click “Network and Sharing Center” icon.
4.Click “Change Adapter Settings”.
5.Double-click “Local Area Connection” icon.
6.Select “Internal Protocol Version 4 (TCP/IPv4)” and click “Properties” button.
7.Select “Obtain an IP address automatically” and “Obtain DNS server address automatically”, and then click “OK” button twice to save the configuration.
– 3 – |
– 4 – |