Pelco ES5230-02N, ES5230-15WP, ES5230-15W, ES5230-15NP, ES5230-15N Specsheet

PRODUCT SPECIFICATION	camera solutions

Esprit® HD Series IP Positioning System

ES5230 SERIES STANDARD AND PRESSURIZED MODELS

Product Features

•Up to 1920 x 1080 Resolution

•16:9 Aspect Ratio; 1080p at 30 Images per Second (ips)

•2.0 Megapixel (MPx), 30X Optical Zoom, 12X Digital Zoom, Wide Dynamic Range (WDR) Camera

•Ability to Control and Monitor Video Over IPv4 and IPv6 Networks

•Built-in Analytics Including AutoTracker and Adaptive Motion Detection

•2 Simultaneous Video Streams: Dual H.264 or H.264 and Scalable MJPEG

•360° Continuous Pan Rotation at 100° per Second

•Supported Protocols: TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, and More

•Electronic Image Stabilization (EIS)

•Pan/Tilt and Enclosure with Integrated Optics Package (IOP) or Pressurized Integrated Optics Cartridge (IOC)

•16 Preset Tours, 256 Presets, 32 Window Blanks

•Integrated Window Wiper with Configurable Delay and Shut-Off (ES5230-1x Models)

•Open IP Standards

•ONVIF Profile S Conformant

Network Positioning System

Pelco takes its industry-leading Esprit® Series positioning system into the world of high definition. Esprit HD delivers crystal-clear, live streaming images over the Internet using a standard Web browser (Microsoft® Internet Explorer® or Mozilla® Firefox®). With six times the resolution of standard definition positioning systems, Esprit HD is an ideal solution to view details such as faces, license plates, tattoos, or other specific features.

Esprit HD supports High-Profile H.264 compression, a vast improvement in quality over MPEG-4 and 20 times more efficient than MJPEG. The positioning system features open architecture connectivity for third-party software recording solutions allowing integration into virtually any IP-based HD system. It is also compatible with Digital Sentry® video management systems. As with all Pelco IP camera solutions, Esprit HD is Endura Enabled™ to record, manage, configure, and view multiple live streams. When connected to an Endura® HD network-based video security system, the positioning system has access to EnduraStor™ and EnduraView™ for optimized image quality and bandwidth efficiency.

Built-In Analytics

Pelco Analytics enhance the flexibility and performance of Esprit HD. Nine Pelco behaviors are preloaded and included as standard features. Pelco behaviors can be configured and enabled using a standard Web browser, and they are compatible with Endura or a third-party system that supports alarms using Pelco’s API.

Web Interface

Esprit HD uses a standard Web browser for powerful remote setup and administration.

Window Blanking

Window blanking is used to conceal user-defined privacy areas that cannot be viewed by an operator. Esprit HD supports up to 32 blanked windows. A blanked area will appear on the screen as a solid gray window.

Video Systemization

Esprit HD easily connects to Pelco IP and hybrid systems such as Endura version 2.0 (or later) and Digital Sentry version 7.3 (or later). The camera is also compatible with Digital Sentry NVs (DS NVs), a full-featured video management software, which is available as a free download at www.pelco.com. DS NVs includes four free Pelco IP licenses and allows for the management of video from up to 64 cameras.

Esprit HD features open architecture connectivity to third-party software. Pelco offers an application programming interface (API) and software developer’s kit (SDK) for interfacing with Pelco’s IP cameras.

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C4008 / REV 11-06-14

TECHNICAL SPECIFICATIONS

Pelco’s ES5230 Esprit® HD Positioning System features a pan/tilt, enclosure, and either an Integrated Optics Package (IOP) or a pressurized Integrated Optics Cartridge (IOC) in a single, easy-to- install system. Options include IOP with or without wiper and IOC models with wiper.

A powder-coated, aluminum construction makes the ES5230 Series ideal for either indoor or outdoor applications. The system has an absolute operating temperature range of –45° to 50°C (–50° to 122°F). Within two hours after power-up, the entire unit can de-ice and be operational from a temperature of –25°C (–13°F).

The ES5230 Series variable pan and tilt speeds range from 0.1 to 40 degrees per second in manual pan mode, and 0.1 to 30 degrees per second in manual tilt. Pan preset and turbo speeds are 100 degrees per second. Tilt preset speed is 30 degrees per second.

The ES5230 Series system’s IOC contains dry nitrogen pressurized to 10 psig, which protects the environment inside the cartridge eliminating internal condensation and corrosion. Sensors strategically placed in the cartridge send an “Alert” message if pressure drops below factory-set acceptable limits. The IOC is factory assembled and installed in the ES5230 Series systems. All labor intensive procedures of setting up the camera, lens and charging the unit with dry nitrogen are eliminated. The miniature size of the cartridge decreases the future need for maintenance and increases the overall reliability of the pressurized unit.

Many models include a window wiper. The wiper is completely integrated into the enclosure and does not interfere with the viewing range of the system. The wiper can be configured to delay between wipes and to automatically shut off after a specified period. The wiper design also allows for easy replacement of the wiper blade. A built-in heater, window defroster/defogger, sun shroud, and insulation blanket are standard features on the ES5230 units, which also includes an open collector auxiliary output to control external devices.

The systems are available with an input voltage of 24 VAC or with a selectable power source of 120/230 VAC. The ES5230 Series also has a power-up recovery mode that allows the user to specify what operation the system will resume whenever the power is cycled.

Electronic Image Stabilization (EIS)

Electronic image stabilization (EIS) is a feature of the camera that can help compensate for some frequencies of vibration. In all cases, care should be taken to ensure that any positioning system is mounted to a rigid location.

The default for EIS is OFF. The user can turn EIS ON if vibration is affecting image quality. Although EIS can reduce the impact of vibration on image quality, it cannot correct for all levels of vibration. Other measures should be taken to isolate the camera from the source of the vibration or to seek a more rigid mounting location.

PELCO ANALYTICS

ES5230 Series includes nine user-configurable behaviors. The camera is capable of running up to three behaviors at the same time; although, the number of behaviors is limited to the available processing power of the camera and the type of analytic being used.

Note: Available processing power is determined by the settings for compression standards, resolution, image rate, bit rate, and analytic configuration.

For each behavior, you can create several custom profiles that contain different camera settings. With these profiles, you can set up different scenarios for the behavior, which will automatically detect and trigger alarms when specific activity is detected.

Pelco Analytics are configured and enabled using a standard Web browser, and Pelco behavior alarms are compatible with Endura or a third-party system that supports Pelco’s API system.

Multiple Pelco behaviors can be scheduled to work during a certain time or condition. For example, during the day, a camera can be configured with Object Counting to count the number of people that enter a lobby door. At night, the operator can change the profile to Camera Sabotage to trigger an alarm if a camera is moved or obstructed. Available Pelco behaviors include:

•Abandoned Object: Detects objects placed within a defined zone and triggers an alarm if the object remains in the zone longer than the user-defined time allows. An airport terminal is a typical installation for this behavior. This behavior can also detect objects left behind at an ATM, signaling possible card skimming.

•Adaptive Motion Detection: Detects and tracks objects that enter a scene and then triggers an alarm when the objects enter a user-defined zone. This behavior is primarily used in outdoor environments with light traffic to reduce the number of false alarms caused by environmental changes.

•AutoTracker: Detects and tracks movement in the field of view. When the AutoTracker behavior is configured, the system automatically pans and tilts to follow the moving object until the object stops or disappears from the monitored area.

•Camera Sabotage: Detects contrast changes in the field of view. An alarm is triggered if the lens is obstructed by spray paint, a cloth, or a lens cap. Any unauthorized repositioning of the camera also triggers an alarm.

•Directional Motion: Generates an alarm in a high traffic area when a person or object moves in a specified direction. Typical installations for this behavior include an airport gate or tunnel where cameras can detect objects moving in the opposite direction of the normal flow of traffic or an individual entering through an exit door.

•Loitering Detection: Identifies when people or vehicles remain in a defined zone longer than the user-defined time allows. This behavior is effective in real-time notification of suspicious behavior around ATMs, stairwells, and school grounds.

•Object Counting: Counts the number of objects that enter a defined zone. This behavior can be used to count the number of people at a store entrance/exit or inside a store where the traffic is light. This behavior is based on tracking and does not count people in a crowded setting.

•Object Removal: Triggers an alarm if an object is removed from a user-defined zone. This behavior is ideal for customers who want to detect the removal of high value objects, such as a painting from a wall or a statue from a pedestal.

•Stopped Vehicle: Detects vehicles stopped near a sensitive area longer than the user-defined time allows. This behavior is ideal for airport curbside drop-offs, parking enforcement, suspicious parking, traffic lane breakdowns, and vehicles waiting at gates.