Pelco C20DW-6V55A, C20DW-6V5A, C20DW-6V21A, C20DW-6R11A, C20DW-6R3A User Manual

C20-DW Series 650 TV lines

High Resolution Camera

Installation/Operation Manual

C3906M-EN (02/12)

Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.

1

CONTENTS
Important Safety Instructions ........................................................................................................................	3
Troubleshooting Tips .....................................................................................................................................	4
Regulatory Notices ........................................................................................................................................	5
1. Introduction................................................................................................................................................	6
2. Part Names and Locations........................................................................................................................	7
3. OSD Menu.................................................................................................................................................	9
4. OSD Menu Settings ................................................................................................................................	10
4.1 LENS..............................................................................................................................................	11
4.2 SHUTTER/AGC .............................................................................................................................	12
4.3 WHITE BAL....................................................................................................................................	13
4.4 HLC/BLC ........................................................................................................................................	14
4.5 PICTURE ADJUST ........................................................................................................................	14
4.6 WDR...............................................................................................................................................	15
4.7 MOTION DET.................................................................................................................................	15
4.8 PRIVACY .......................................................................................................................................	15
4.9 DAY/NIGHT....................................................................................................................................	16
4.10 3D NR ..........................................................................................................................................	16
4.11 CAMERA ID .................................................................................................................................	16
4.12 SYNC ...........................................................................................................................................	16
4.13 LANGUAGE .................................................................................................................................	17
4.14 CAMERA RESET.........................................................................................................................	17
4.15 EZOOM ........................................................................................................................................	17
4.16 DIS ...............................................................................................................................................	17
4.17 FOCUS ADJ.................................................................................................................................	17
4.18 ALARM.........................................................................................................................................	17
4.19 REMOTE......................................................................................................................................	19
4.20 SAVE ALL ....................................................................................................................................	19
5. Specification ............................................................................................................................................	20
PRODUCT WARRANTY AND RETURN INFORMATION .........................................................................	22

2

C3906M-EN (02/12)

Important Safeguards and Warnings

Important Safety Instructions

1.Read Instructions. All the safety and operating instructions should be read before the camera is operated.

2.Retain Instructions. The safety and operating instructions should be retained for future reference.

3.Heed Warnings. All warnings on the camera and in the operating instructions should be adhered to.

4.Follow Instructions. All operating and use instructions should be followed.

5.Cleaning: Unplug the power unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

6.Attachments: Do not use attachments not recommended by your appliance dealer, as they may cause hazards.

7.Water and Moisture: Do not use the camera in any location in which it may be exposed to water or moisture. (For example, dripping, splashing, or liquid near equipment etc.)

8.Accessories: Do not place the camera on an unstable cart, stand, tripod, bracket, or table. The camera may fall, causing serious injury to a child or adult, and serious damage to the camera. Use only with mounting accessories recommended by your appliance dealer or sold with the camera. Any mounting of the camera should follow your appliance dealer's instructions.

The camera must be installed in a location or on a piece of equipment that can withstand three times the total weight of the camera, including the lens, camera, mount, adapter, etc.

9.Any appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

10.Ventilation: The camera should never be placed near or over a radiator or heat register. The camera should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or your appliance dealer's instructions have been adhered to.

11.Power Sources: The camera should be operated only from the type of power source indicated on the rating plate. If you are not sure of the type of power supply for your installation site, consult your appliance dealer or local power company.

12.Power Cord Protection: Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the camera.

13.Lightning: For added protection for the camera during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the camera due to lightning and power line surges.

14.Overloading: Do not overload the wall outlet and extension cord, as this can result in a risk of fire or electric shock.

15.Object and Liquid Entry: Never push objects of any kind into the camera through openings, as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the camera.

16.Servicing: Do not attempt to service the camera yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

3

C3906M-EN (02/12)

Important Safeguards and Warnings

17.Damage Requiring Service: Unplug the power unit from the wall outlet. Refer servicing to qualified service personnel under the following conditions.

a.When the power supply cord or plug is damaged.

b.If liquid has been spilled or objects have fallen into the camera.

c.If the camera has been exposed to rain or water.

d.If the camera does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the camera to its normal operation.

e.If the camera has been dropped or the cabinet has been damaged.

f.When the camera exhibits a distinct change in performance. This indicates a need for service.

18.Replacement Parts: When replacement parts are required, be sure the service technician has used replacement parts specified by a qualified dealer or that have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock, or other hazards.

19.Safety Check: Upon completion of any service or repairs to the camera, ask the service technician to perform safety checks to determine that the camera is in proper operating condition.

Troubleshooting Tips

Ensure that all power cords are attached.

Ensure that all power switches are in the ON position.

Ensure that all cables are installed in the proper location and are fully seated.

4

C3906M-EN (02/12)

Important Notices

Regulatory Notices

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RADIO AND TELEVISION INTERFERENCE

This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this equipment under Federal Communications Commission’s rules.

In order to maintain compliance with FCC regulations shielded cables must be used with this equipment. Operation with non-approved -equipment or unshielded cables is likely to result in interference to radio and television reception.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

Operating Notes:

For dual voltage model: Connect to DC12V or AC 24V power adapter.

For high voltage model: Connect to AC 220V power source.

Operating Conditions

•Avoid viewing very bright objects (example, light fixtures) for extended periods.

•Avoid operating or storing the unit in the following locations:

-Extremely humid, dusty, hot/cold environments (where the operating temperature is outside the recommended range of 14°F to 122°F [-10°C to +50°C]

-Close to sources of powerful radio or TV transmitters

-Close to fluorescent lamps or objects reflecting light

-Under unstable light sources (may cause flickering)

5

C3906M-EN (02/12)

Introduction

1. Introduction

The box camera is ideal for indoor installation in commercial environment.

Before You Begin:

Please read this guide carefully before you install the box camera. Keep this guide for future reference.

Package Contents:

Check that the items received match those listed on the order form and packing slip. The dome camera packing box includes:

•One installation/operation manual

•One fully assembled camera

•One Lens mounting cap

•One Hexagonal and Minus wrench

•One C adapter ring

•One Auto Iris Lens connector

If any parts are missing or damaged, contact the dealer you purchased the camera.

Optional Accessories:

•C10-UM Mount

It is recommended mounting camera with C10-UM mount, a C10 series universal wall/ceiling/rail mounting kit.

6

C3906M-EN (02/12)

Part Names and Locations

2. Part Names and Locations

Figure 2-1 C20-DW-6/C20-DW-6X

Figure 2-2 C20-DW-7X

7

C3906M-EN (02/12)

Part Names and Locations

(1) Lens mount

For the installation of CS Mount lenses only, use no adapter.

Before mounting the lens, you can screw the C adapter onto the lens, and then screw the lens onto the lens mount.

(2) Back Focus adjustment

A. Back Focus Screw:

Using Minus wrench to loosen this screw before you use the Focus Adjustment. To maintain the correct focus afterwards, ensure that it is tightened.

B. Focus Adjustment:

Adjust this dial to obtain correct back-focus whilst using a CS mount lens.

(3) Video Output Terminal

BNC: Used to give out the video signal. Connected to the video input terminal of a monitor, switcher, etc. (to be terminated with 75 ohm impedance)

(4) OSD joystick control

Press the OSD joystick control straight down:

•For two seconds to enter the Main menu.

•To enter a screen or to select a submenu option. A selected menu item blinks.

(5) I/O

Connect your external devices to the corresponding I/O terminal block. The pins of the I/O terminal block controls the following signals: TP+/-: UTP (Unshielded Twisted Pair) ALIN/GND Alarm input Ground (electrically) in electrical circuits.

ALOUT/COM Alarm output Ground (electrically) in electrical circuits.

(6) Power Connector

Connect to the respective power source.

•For dual-voltage model: Connect to DC12V or AC 24V power adapter.

•For high-voltage model: Connect to AC 220V power source.

WARNING:

This apparatus must be GROUNDED.

(7) Power Indicator

The power indicator light is lit (Red), which means the power is connected.

(8) Auto Iris lens connector

Supplies power and control signals to an autoiris lens.

8

C3906M-EN (02/12)