Peerless-AV PLP-V4X2 User Manual

Installation and Assembly - Adapter Bracket for VESA®

Model: PLP-V4X3

400 x 300 Screens

IMPORTANT! Read instruction sheet before you start installation and assembly. Before you start make sure all parts listed

are included with your product. Some parts may appear slightly different than illustrated.

Parts List

Description Qty. Part #

adapter plate 1 201-1743

A BB M5 x 10 mm socket pin screw 4 520-1063 CC M6 x 16 mm socket pin screw 4 520-1132 DD 4 mm allen wrench 1 560-9646 EE M8 x 40 mm screw 4 520-1152 FF multi-washer 4 580-1036 GG .5 I.D. spacer 4 590-1121 HH washer 4 540-9406 II .34 I.D. spacer 4 540-1002

Used with

speciﬁ c

mounts only

WARNING

• Do not overtighten, or permanent damage my occur to the screen. Torque to 26-35 in • lb (30-40 kg • cm).

Attach adapter bracket (AA) to back of screen using four screws (EE) with washers (HH) as shown in ﬁ gure 1, or

four screws (BB or CC) with washers (FF) as shown in ﬁ gure 2. Tighten screws using 4 mm allen wrench (DD). For screens with a bump out, recess or shallow inserts, spacers (GG and/or II) may be used between the adapter bracket and your screen as shown in detail 1.

ﬁ g. 1

DETAIL 1

ﬁ g. 2

BB, CC

1 of 1

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

All other brand and product names are trademarks or registered trademarks of their respective owners.

ISSUED: 11-09-07 SHEET #: 202-9268-4 09-27-10