Page 1
Installation and Assembly - Adapter Bracket for VESA
200 x 100 Screens
®
Models:
PLP V2X1,
PLP V2X1-S
Parts ListTS LIST
Description Qty. Part #
AA adapter bracket- top plate 1 200-4289
BB adapter bracket- bottom plate 1 200-4340
CC M6 x 10 mm socket pin screw 4 520-2066
DD M4 x 16 mm socket pin serrated washer head screw 6 510-2087
EE .5 OD x .44 ID x .19 bushing 6 590-1116
FF 4 mm security allen wrench 1 560-9646
Note: Actual parts may appear slightly different than illustrated.
CC
DD
AA
FF
IMPORTANT! Read entire instruction sheet before you start installation and assembly.
FOR VESA 100 MOUNTING PATTERN - Sharp LC30HV2U
Use four M4 screws (DD) and four bushings (EE) to attach
bottom plate (BB) to monitor using security allen wrench (FF).
Use four center holes of plate as shown below.
MONITOR
EE
FOR VESA 100 X 200 MOUNTING P A TTERN - NEC LCD3000-BK
Use six M4 screws (DD) and six bushings (EE) to attach bottom
plate (BB) to monitor using security allen wrench (FF). Use six
slots on plate as shown below. Align upper end of slots with
screen mounting holes.
EE
BB
EE
MONITOR
BB
DD
Use four M6 screws (CC) to attach top plate (AA) to bottom plate (BB) using security allen wrench (FF).
NOTE: Top plate (AA) will have one set of threaded holes on one side and a set of non-threaded holes on the other side. Bottom plate
will also have one set of threaded holes on one side and a set of non-threaded holes on the other side. All four M6 screws should pass
through non-threaded holes first and into threaded holes.
VESA 100
MOUNTING
P ATTERN
DD
BB
100 x 200
MOUNTING
P ATTERN
CC
BB
AA
BB
AA
1 of 1
Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.
All other brand and product names are trademarks or registered trademarks of their respective owners.
ISSUED: 11-20-07 SHEET #: 202-9258-2 06-25-08
© 2008, Peerless Industries, Inc. All rights reserved.
Loading...