Installation and Assembly - Adapter Bracket for VESA®
200 x 200 Screens
IMPORTANT! Read entire instruction sheet before you start
installation and assembly.
Maximum Load Capacity : 125 lbs (57 kg)
Parts List
Description
A 1 202-1505
adapter bracket
B 4 520-1050
M6 x 12mm socket pin screw
C 1 560-9646
4mm allen wrench
D M6 x 20mm socket pin screw 4 520-9554
E 4 520-1706
M8 x 10mm socket pin screw
F M4 x 8mm sock pin serrated washer head screw 4 510-1005
#10 washer
G 4 540-9400
H 4 510-1079
M4 x 12mm socket pin serrated washer head screw
I M5 x 10mm socket pin screw 4 520-1063
G
H
Qty. Part #
A
Model: PLP-V2X2
C
B
Used with specifi c
mounts only
Some parts may appear slightly different than illustrated.
F
D
E
WARNING
• Do not overtighten! Overtightening may cause permanent damage to the screen. Torque to 26-35 in • lb
(30-40 kg • cm).
Begin with shortest length screw (E or F), hand thread through adapter plate into screen as shown below.
Screw must make at least three full turns into screen insert and fi t snug into place. Do not over tighten. If
screw cannot make three full turns into screen insert, select a longer length screw (B, D or H). Repeat for
remaining holes.
B, D, E, F,
or H
#10 washer (G) is only to be
used with M4 x 8 mm socket
pin serrated washer head
screw (F), M4 x 12 mm socket
pin serrated washer head
screw (H) or M5 x 10mm
socket pin screw (I).
Washer goes between screw
and adapter plate.
A
I
G
1 of 1
Visit the Peerless Web Site at www.peerless-av.com For customer service call 1-800-865-2112
All other brand and product names are trademarks or registered trademarks of their respective owners.
ISSUED: 11-26-07 SHEET #: 202-9259-3 04-11-13
© 2013, Peerless Industries, Inc. All rights reserved.
Loading...