Intended Use .................................................................................................................................... Page 6
Scope of Delivery ............................................................................................................................ Page 6
Technical Data ................................................................................................................................. Page 7
Service ............................................................................................................................................. Page 13
from overheating, the fan heater should
never be covered.
CERAMIC FAN HEATER PKH 2000 A1
Introduction
Congratulations on the purchase of your new fan
heater. You have opted for a high quality product. The
operating instructions are part of this product. They
contain important information on safety, usage and
disposal. Familiarise yourself with all operating and
safety instructions before you use the product. Use the
product only as described and only for the specified
areas of use. When passing on the product, please do
not forget to hand over all the necessary documents to
the new user.
Warning - Danger from
hot surfaces!
Dispose of packaging and
device environmentally friendly!
The packaging is made of envi-
ronmentally friendly materials!
Observe the marking of the packaging materials for waste separation!
Indoor use only!
deemed to be improper and entails a considerable
risk of accidents. We assume no liability for damage
resulting from improper use. The fan heater is intended
for private use only.
Equipment
Stand with carrying handle
1
Heating level switch
2
Control light
3
Temperature control
4
Air outlet
5
Rotary knobs
6
Mains cable
7
Intended Use
This fan heater is intended for heating of enclosed
spaces only. The fan heater is not suitable for use in
rooms where special conditions exist, such as a
corrosive or potentially explosive atmosphere (dust,
vapour or gas). Do not use the appliance outdoors.
Any other use or modification of the device shall be
GB/IE/NI6
Scope of Delivery
1 Ceramic fan heater PKH 2000 A1
1 Operating manual
Technical Data
Input voltage: 220-240 V~, 50 Hz
Nominal power consumption: 2000 W
Safety class: I
Heat control setting 1: 1000 W
Heat control setting 2: 2000 W
Fan operation: 25 W
Thermostat: 0 bis +65°C
Dimensions:
210 x 160 x 217 mm
Weight: approx. 1.6 kg
Information requirements for electric local
space heaters
Model identifier(s): PKH 2000 A1
ItemSymbol Value Unit
Heat output
Nominal heat output P
Minimum heat
nom
P
min
2.0kW
1.0kW
output (indicative)
Maximum continuous
P
max,c
2.0kW
heat output
Auxiliary electricity consumption
At nominal heat
el
max
nakW
output
At minimum heat
el
min
nakW
output
In standby mode
el
SB
nakW
ItemUnit
Type of heat input, for electric storage
local space heaters only (select one)
manual heat charge control, with
[no]
integrated thermostat
manual heat charge control with room
[no]
and/or outdoor temperature feedback
electronic heat charge control with room
[no]
and/or outdoor temperature feedback
fan assisted heat output[no]
Type of heat output/room
temperature control (select one)
single stage heat output and no room
[no]
temperature control
Two or more manual stages,
[no]
no room temperature control
with mechanic thermostat room
[yes]
temperature control
with electronic room temperature control[no]
electronic room temperature
[no]
control plus day timer
electronic room temperature
[no]
control plus week timer
Other control options
(multiple selections possible)
room temperature control,
[no]
with presence detection
room temperature control,
[no]
with open window detection
with distance control option[no]
with adaptive start control[no]
with working time limitation[no]
with black bulb sensor[no]
information and instructions
may result in serious injury
or damage to property.
KEEP ALL THE SAFETY AND
INSTRUCTIONS FOR FUTURE
REFERENCE!
Danger of life-
threatening electric shock!
Mortal danger through contact with ducts or components
under voltage!
Do not use the fan heater if
the power cord or plug is damaged. Have an authorised
electrician install a new power
cord before any further use of
the fan heater.
Never open the fan heater
housing. There is a danger of
electric shock if the live connections are touched and/or
the electrical and mechanical
installation is changed!
Before connecting the fan heat-
er, compare the connection
data on the rating plate (voltage and frequency) with the
data of your electricity supply.
Make sure the data matches,
so that no damage to the fan
heater occurs.
Make sure the mains cable
is undamaged and is not laid
over hot surfaces and/or sharp
edges.
Make sure the mains cable is
not kinked or pinched.
Repairs to electrical appliances
should only be performed by
professionals who have been
trained by the manufacturer.
Unauthorised repairs may result in considerable dangers for
the user.
FIRE HAZARD!
For that reason, never use the
fan heater in the vicinity of or
below curtains and other combustible material.
Avoid contact between the fan
heater and combustible material
(e.g. textiles).
To prevent the fan heater
overheating, the heater
must not be covered.
GB/IE/NI8
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.