Parkside PBS 600 B1 Operation And Safety Notes
IAN 108191
BELT SANDER PBS 600 B1
BANDSCHLEIFER
Bedienungs- und Sicherheitshinweise
Originalbetriebsanleitung
BEL T SANDER
Operation and Safety Notes
Translation of the original instructions
GB / IE Operation and Safety Notes Page 5
DE / AT / CH Bedienungs- und Sicherheitshinweise Seite 15
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the
device.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen
Funktionen des Gerätes vertraut.
A
6 3
1
E FD
11
B
8
C
12
7
9
10
2
457
5 GB/IE
Table of contents
Introduction
Proper use ...........................................................................................................................................Page 6
Features and equipment .....................................................................................................................Page 6
Included items ..................................................................................................................................... Page 6
Technical information .........................................................................................................................Page 6
General power tool safety warnings
1. Work area safety ...........................................................................................................................Page 7
2. Electrical safety ..............................................................................................................................Page 7
3. Personal safety ...............................................................................................................................Page 7
4. Power tool use and care ................................................................................................................Page 8
5. Service ............................................................................................................................................Page 8
Safety advice for belt sanders...........................................................................................................Page 8
Preparing for use
Tensioning / changing the sanding belt ............................................................................................ Page 9
Advice on use .....................................................................................................................................Page 9
Vacuum dust extraction ...................................................................................................................... Page 10
Operation
Switching on and off .......................................................................................................................... Page 10
Selecting the correct rotational speed and sanding belt ................................................................ Page 10
Using the device in a fixed mounting ................................................................................................Pa ge 11
Tips and tricks .....................................................................................................................................Pa ge 11
Maintenance and cleaning ..............................................................................................P a ge 11
Service centre .............................................................................................................................Page 12
Warranty ........................................................................................................................................Page 12
Disposal ............................................................................................................................................ Page 12
Translation of the original declaration of conformity /
Manufacturer ..............................................................................................................................Page 13
6 GB/IE
Introduction
Belt sander PBS 600 B1
Q
Introduction
We congratulate you on the purchase of your new
device. You have chosen a high quality product.
The instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. Only use the unit as described and for the specified applications. If you pass
the product on to anyone else, please ensure that
you also pass on all the documentation with it.
Q
Proper use
The belt sander - depending on the sanding paper
used - is designed for dry sanding wood, plastic,
metal and putty, as well as painted surfaces. The device may only be used for dry sanding. Always use
a sanding belt and grade of grit suitable for the particular surface you are sanding. The speed selected
should also be appropriate for the material. The device is not intended for commercial use. Any other
use or modification to the device shall be considered
as improper use and could give rise to considerable
dangers. The manufacturer will not accept liability for
loss or damage arising from improper use.
Q
Features and equipment
1
Belt speed adjuster wheel
2
Recesses for clamp mounting
3
Lock button for ON / OFF switch
4
ON / OFF switch
5
Dust box
6
Belt adjuster screw
7
Sanding belt
8
Adapter port
9
Tensioning lever for sanding belt
10
Clamps
11
Adapter for external vacuum extraction
12
Reducer piece
Q
Included items
1 Belt sander PBS 600 B1
1 Sanding belt
1 Dust collection box
1 Vacuum extraction adapter and reducer piece
(for external vacuum extraction)
2 Clamps
1 Operating instructions
Q
Technical information
Belt sander PBS 600 B1
Nominal voltage: 230 V~ 50 Hz
Nom. power input: 600 W
No-load belt speed: 170–250 m / min
Idle speed: n
0
360–560 min
-1
Sanding belt: 75 x 457 mm
Protection class: II /
Noise and vibration data:
Measured values for noise are determined in accordance with EN 60745. The A-weighted noise level
of the electrical power tool are typically:
Sound pressure level: 87.29 dB(A)
Sound power level: 98.29 dB(A)
Uncertainty K: 3 dB
Wear ear protection!
Total vibration, EN 60745:
Vibration emission value a
h,W
= 1.901 m / s2
Uncertainty K = 1.5 m / s
2
Rear handle: a
h,W
= 1.901 m / s
2
Front handle: a
h,W
= 1.566 m / s2,
K = 1.5 m / s
2
The vibration emission value specified in these instructions was measured in accordance with an EN 60745 standardised measurement
process and can be used to compare tools. The vibration emission value specified can also serve as
a preliminary assessment of the exposure.
Different uses of the power tool give rise to different
vibration emission values and in many cases they
may exceed the values given in these instructions.
7 GB/IE
Introduction / General power tool safety warnings
It is easy to underestimate the vibration load if the
electrical power tool is used regularly in particular
circumstances.
Note: If you wish to make an accurate assessment
of the vibration loads experienced during a particular
period of working, you should also take into account
the intervening periods of time when the device is
switched off or is running but is not actually in use.
This can result in a much lower vibration load over
the whole of the period of working.
General power tool
safety warnings
Read all safety
warnings and all instructions. Fail-
ure to follow the warnings and instructions
may result in electric shock, fire and / or serious injury.
Save all warnings and instructions for
future reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated (cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) D
o not operate power tools in explosive
atmospheres, such as in the presence
of flammable liquids, gases or dust.
Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away
while operating a power tool. Distractio
ns
can cause you to lose control.
2. Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plug
s
and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock if
your body is earthed or grounded.
c) Do not expose power tools to rain or
wet conditions. Water entering a power tool
will increase the risk of electric shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk
of electric shock.
e)
When operating a power tool outdo
ors,
use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor
use reduces the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3. Personal safety
a) Stay alert, watch what you are doing
and use common sense when operating a power tool. Do not use a power
tool while you are tired or under the
influence of drugs, alcohol or medication. A moment of inattention while operating
power tools may result in serious personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and / or
battery pack, picking up or carrying
the tool. Carrying power tools with your fing
er
8 GB/IE
General power tool safety warnings
o
n the switch or energising power tools that hav
e
the switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotating part
of the power tool may result in personal injury.
e) Do not overreach. Keep proper foot-
ing and balance at all times. This enables
better control of the power tool in unexpected
situations.
f) Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
g) If devices are provided for the connec-
tion of dust extraction and collection
facilities, ensure these are connected
and properly used. Use of dust collection
can reduce dust-related hazards.
4. Power tool use and care
a) Do not force the power tool. Use the
correct power tool for your applica
tion.
The correct power tool will do the job better
and safer at the rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power
tool that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power
source and / or the battery pack from
the power tool before making any adjustments, changing accessories, or
storing power tools. Such preventive safety
measures reduce the risk of starting the power
tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for mis-
alignment or binding of moving parts,
breakage of parts and any other con-
dition that may affect the power tool’s
operation. If damaged, have the power
tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended could
result in a hazardous situation.
5. Service
a) Have your power tool serviced by a
qualified repair person using only
iden-
tical replacement parts. This will ensure
that the safety of the power tool is maintained.
Q
Safety advice for
belt sanders
Hold the device by the insulated han-
dle surfaces as the sanding belt could
strike the device’s own mains lead.
Damaging a live wire could result in the metal
parts of the device also becoming live and
could lead to an electric shock.
DANGER OF FIRE FROM FLYING SPARKS!
Sanding metal creates flying sparks. For this
reason, always make sure that nobody is placed
in any danger and that there are no inflammable
materials near the working area.
When undertaking prolonged sanding of wood,
and in particular when working on materials
that give rise to dusts that are hazardous to
health, the sander must be connected to a
suitable external dust extraction device.
Ensure that there is adequate ventilation when
working on plastic, paint, varnish etc.
The belt sander is designed for the dry sanding
of large surfaces of wood, plastic, metal and
Loading...