Panasonic TX-L32EM6Y Operating Instructions

Operating Instructions
LCD Television
For more detailed instructions, refer to the Operating Instructions on the CD-ROM. To view the Operating Instructions on the CD-ROM, you need a computer equipped with a CD-ROM drive, and Adobe® Reader® (Version 8.0 or later is recommended) installed on your computer.
Depending on the operating system or settings on your computer, the Operating Instructions may not start automatically.
In this case, open the PDF le under the “MANUAL”
folder manually to view the instructions.
Model No.
TX-L32EM6Y
Contents
Be Sure to Read
Safety Precautions ...............................................2
Maintenance ..........................................................3
Quick Start Guide
Accessories / Options ..........................................4
Identifying Controls .............................................7
Basic Connection .................................................9
Auto Setup .......................................................... 11
How to Use Menu Functions .............................14
Specications .....................................................21
Licence ................................................................22
Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer for assistance.
English
Be Sure to Read
Safety Precautions
Warning
Safety Precautions
Handling the mains plug and lead
Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause re.)
● Ensure that the mains plug is easily accessible.
● Do not touch the mains plug with a wet hand. This may cause electrical shock.
Do not use any mains lead other than that provided with this TV. This may cause re or electrical shock.
Do not damage the mains lead, damaged lead may cause re or electrical shock.
Do not move the TV with the lead plugged into a socket outlet.
Do not place a heavy object on the lead or place the lead near a high temperature object.
Do not twist the lead, bend it excessively or stretch it.
Do not pull on the lead. Hold onto the mains plug body when disconnecting the plug.
Do not use a damaged mains plug or socket outlet.
Ensure the TV does not crush the mains lead.
If you nd any
abnormality, remove the mains plug immediately!
AC 220-240 V 50/60 Hz
Power source / Installation
This TV is designed for:
• AC 220-240 V, 50/60 Hz
• Table-top use
Do not remove covers and NEVER modify the TV yourself
● High voltage components may cause serious electrical
shock, do not remove the rear cover as live parts are accessible when it is removed.
● There are no user serviceable parts inside.
● Have the TV checked, adjusted or repaired at your
local Panasonic dealer.
Do not expose the TV to direct sunlight and other sources of heat
Avoid exposing the TV to direct sunlight and other
sources of heat.
To prevent the spread of
re, keep candles or other open ames away from
this product at all times
Do not expose to rain or excessive moisture
To prevent damage which might result in electric shock
or re, do not expose this TV to rain or excessive
moisture.
● This TV must not be exposed to dripping or splashing
water and objects lled with liquid, such as vases, must
not be placed on top of or above the TV.
Do not place the TV on sloped or unstable surfaces, and ensure that the TV does not hang over the edge of the base
● The TV may fall or tip over.
Do not place foreign objects inside the TV
Do not allow any objects to drop into the TV through
the air vents as re or electric shock may result.
Use only original dedicated pedestal / mounting equipment
Using an unapproved pedestal or other xtures may
make the TV unstable, risking injury. Be sure to ask your local Panasonic dealer to perform the setup or installation.
Use approved pedestals (p. 5) /
wall-hanging brackets (p. 4).
2
Caution
10
10 10 10
When cleaning the TV, remove the mains plug
● Cleaning an energised TV may cause electric shock.
Remove the mains plug from the wall socket when the TV is not in use for a prolonged period of time
● This TV will still consume some power even in the Off
mode, as long as the mains plug is still connected.
Do not expose your ears to excessive volume from the headphones
● Irreversible damage can be caused.
Do not apply strong force or impact to the display panel
● This may cause damage resulting in injury.
Maintenance
Do not block the rear air vents
Adequate ventilation is essential to prevent failure of
electronic components.
● Ventilation should not be impeded by covering the
ventilation openings with items such as newspapers, table cloths and curtains.
We recommend that a gap of at least 10 cm is left all
around this TV even when placed inside a cabinet or between shelves.
● When using the pedestal, keep the space between the
bottom of the TV and the surface where the TV is set.
● If pedestal is not used, ensure the vents in the bottom
of the TV are not blocked.
Minimum distance
(cm)
Maintenance
First, remove the mains plug from the socket outlet.
Display panel, Cabinet, Pedestal
Regular care:
Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to clean the dirt or
ngerprints.
Caution
● Do not use a hard cloth or rub the surface too hard, otherwise this may cause scratches on the surface.
Take care not to subject the TV’s surfaces to water or detergent. Liquid inside the TV could lead to product failure.
● Take care not to subject the surfaces to insect repellent, solvent, thinner or other volatile substances. This may
degrade surface quality or cause peeling of the paint.
The surface of the display panel is specially treated and may be easily damaged. Take care not to tap or scratch the
surface with your ngernail or other hard objects.
Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time. This may
degrade surface quality.
For stubborn dirt:
First clean the dust on the surface. Dampen a soft cloth with clean water or diluted neutral detergent (1 part
detergent to 100 parts water). Wring the cloth and wipe the
surface. Finally, wipe away all the moisture.
Mains plug
Wipe the mains plug with a dry cloth at regular intervals. Moisture and dust may lead to re or electrical shock.
3
Quick Start Guide
VIERA
TOOLS INPUT
TV AV
MENU TEXT STTL GUIDE
EXIT
OK
OPTION
BACK/ RETURN
ASPECT
MUTE
STILL
LAST VIEW
TV
jkl
tuv
abc
mno
wxyz
def
ghi
pqrs
Accessories / Options
Standard accessories
Remote Control
N2QAYB000815
Quick Start Guide
Batteries for the Remote Control (2)
(R6AA)
(p. 4)
Pedestal
(p. 5)
Mains Lead
(p. 9)
Assembly screws for base (4)
(p. 5)
M4 × 14 M4 × 10
Accessories / Options
Assembly screws for pedestal (4)
(p. 5)
Operating Instructions Pan European Guarantee
Card
Accessories may not be placed all together. Take care not to throw them away unintentionally.
This product contains possibly dangerous parts (such as plastic bags), that can be breathed in or swallowed by
young children accidentally. Keep these parts out of reach of young children.
Installing / removing remote’s batteries
1 Remove the battery compartment cover. 2 Insert two R6AA batteries (1.5V) according to
“+” and “-” polarity markings inside the battery
compartment, then close the battery compartment cover.
Pull open
Hook
Caution
● Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control.
● Do not mix old and new batteries.
Replace only with same or equivalent type. Do not mix different battery types (such as alkaline and manganese
batteries).
Do not use rechargeable (Ni-Cd) batteries.
● Do not burn or break up batteries.
Do not expose batteries to excessive heat such as sunshine, re or the like.
● Make sure you dispose of batteries correctly.
Ensure batteries are replaced correctly, there is danger of explosion and re if battery is reversed.
● Do not disassemble or modify the remote control.
Note the correct
polarity (+ or -)
Close
4
Attaching / removing the pedestal
Warning
Do not disassemble or modify the pedestal.
● Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any pedestal other than the one provided with this TV.
● Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
● If you use the pedestal while it is physically damaged, personal injury may result. Contact your local Panasonic
dealer immediately.
During set-up, make sure that all screws are securely tightened.
If insufcient care is taken to ensure screws are properly tightened during assembly, the pedestal will not be strong
enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Ensure that the TV does not fall over.
● If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal injury
may result.
Two or more people are required to install and remove the TV.
● If two or more people are not present, the TV may be dropped, and personal injury may result.
When removing the pedestal from the TV, do not remove the pedestal by the methods other than the specied procedure. (see below)
Otherwise the TV and / or pedestal may fall over and become damaged, and personal injury may result.
Assembly screws (8) Bracket Base
M4 × 14
Assembly screws for base (4)
M4 × 10
Assembly screws for pedestal (4)
1 Place the TV screen face-down
on a cushioned, clean surface to protect the screen from damages and scratches.
2 Assembling the pedestal
Use the assembly screws to fasten
the bracket to the base securely.
● Make sure that the screws are
securely tightened.
● Forcing the assembly screws the
wrong way will strip the threads.
M4 × 14
Hold the bracket not to fall over
3 Securing the TV
Adjust the position of the
A
pedestal, then insert the pedestal to the TV screen.
Use the assembly screws to
B
fasten securely.
● Tighten the four assembly screws
loosely at rst, then tighten them rmly to x securely.
Carry out the work on a horizontal
and level surface.
M4 × 10
B
A
Quick Start Guide
Accessories / Options
Front
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Place the TV screen facing down on a at surface place where maintained with soft materials (such as a blanket)
for protecting the display screen.
2 Remove assembly screws for pedestal with screw driver. 3 Remove the pedestal from the TV.
5
Preventing the TV from falling over
Using the fall-prevent screw hole and a screw (commercially available), securely x the body of the pedestal to the
installation surface.
The place where the pedestal is to be xed should be thick enough and made of hard material.
Quick Start Guide
Accessories / Options
Screw (not supplied)
Diameter: 3 mm
Length: 25 - 30 mm
Screw hole
6
Identifying Controls
Remote Control
7
VIERA
1 2
3 4
TOOLS INPUT
TV AV
MENU TEXT STTL GUIDE
EXIT
5 6 7
OPTION
OK
BACK/
RETURN
8
9
ASPECT
10
MUTE
11
abc
def
12
13
ghi
pqrs
STILL
TV
1 Standby On / Off switch
● Switches TV on or off standby.
● If you cannot turn the TV power on by pressing
button of the remote control, please press
(POWER) button on the back of the TV.
2 VIERA TOOLS
● Displays some special feature icons and accesses
easily.
3 (p. 14)
● Press to access [Picture], [Sound], [Timer], [Setup],
and [Help].
4
● Switches to teletext mode.
5 (Information)
● Displays channel and programme information.
6 Cursor buttons
● Makes selections and adjustments.
jkl
tuv
mno
wxyz
LAST VIEW
14
15
8
16 17
9 Coloured buttons (red-green-yellow-blue)
10 (Volume up / Volume down)
18
11
12 Numeric buttons
19
20
13
14 Input mode selection
21
15
16
17
18
19 (Channel up / Channel down)
20
21
Conrms selections and choices.
Press after selecting channel positions to quickly
change channel.
● Displays the Channel List.
● Easy optional setting for viewing, sound, etc.
Used for the selection, navigation and operation of
various functions.
● Changes volume.
● Changes aspect ratio.
● Changes channel and teletext pages.
● Sets characters.
● When in Standby mode, switches TV on.
Freezes / unfreezes the picture.
Holds the current teletext page (teletext mode).
- Switches DVB-C / DVB-T / Analogue
mode.
- Switches to AV input mode from
[Input Selection] list.
● Displays TV guide.
● Displays subtitles.
● Returns to the normal viewing screen.
Returns to the previous menu / page.
Selects channel in sequence.
● Switches sound mute on or off.
● Switches to previously viewed channel or input mode.
Quick Start Guide
Identifying Controls
7
Indicator / Control panel
1/2
Mode
Bass Treble
Equaliser
Balance Surround Headphone Volume Auto Gain Control Volume CorrectionVolume Correction Speaker Distance to Wall
Standard
0 0
0
20
O
O
0
Over 30cm
Main Menu
Picture
Sound
Timer
Setup
Help
Access
Select
RETURN
Page up
Page down
Selects your favourite sound mode.
OK
BACK/
EXIT
1 C.A.T.S. (Contrast Automatic Tracking System)
sensor
Senses brightness to adjust picture quality when
[Ambient Sensor] in [Picture] is set to [On].
(p. 15)
2 Remote control signal receiver
● Do not place any objects between the TV remote
control signal receiver and remote control.
3 Power indicator
Quick Start Guide
Red: Standby Green: On
● The LED blinks when the TV receives a command from
the remote control.
1 2 3
4
● Selects an input source.
Conrms and enters a selection on the On-Screen
Display Menu.
Identifying Controls
5 Menu
Press the button for a while to open or close the
On-Screen Display Menu.
6
● Changes channels.
7
● Changes volume.
Adjusts the value of the selected item on the
On-Screen Display Menu.
8
(POWER)
● Switches TV on or off.
● To completely turn off the TV, please remove the mains
lead from the wall socket.
Selects item on the On-Screen Display Menu.
Note
● If the TV is turned off by (POWER) button on the back of the TV, you cannot switch TV power on by button of
the remote control. Please press (POWER) button again on the back of the TV to turn the TV on.
Using the On-Screen Displays - Operation guide
Many features available on this TV can be accessed via the On-Screen Display menu.
 Operation guide  How to use remote control
Operation guide will help you to operate by using the remote control.
Example: [Sound]
MENU
OK
● Open the main menu
Move the cursor / select from a
range of options / select the menu item (up and down only) / adjust levels (left and right only)
Access the menu / store settings
after adjustments have been made or options have been set
INPUT
OK
4
HOLD
for
MENU
5
6
7
8
Auto power standby function
The TV will automatically go into Standby mode in the following conditions:
[Off Timer] is active in the [Timer].
• No operation is performed for 4 hours if [Auto Standby] is set to [On].
8
Operation guide
RETURN
● Return to the previous menu
● Exit the menu system and return to
the normal viewing screen
Loading...
+ 16 hidden pages