OPTOELECTRONICS OPI3301N User Manual
Handheld Bluetooth 2D Imager Scanner
OPI-3301n
This manual provides specifications for the OPI3301n handheld Bluetooth 2D imager scanner.
Specifications Manual
All information subject to change without notice.
Document History
OPI-3301n
Specifications Manual
Model Number:
Edition:
Date:
OPI-3301n
1st
2014-10-20
Specification Number:
Original Spec Number:
(SS14022)
(SS14020)
Copyright 2014 Opticon. All rights reserved.
This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any
electronic or machine readable form without prior written consent of Opticon.
Limited Warranty and Disclaimers
PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING OR USING THE
PRODUCT.
Serial Number
A serial number appears on all Opticon products. This official registration number is directly related to the device
purchased. Do not remove the serial number from your Opticon device. Removing the serial number voids the
warranty.
Warranty
Unless otherwise agreed in a written contract, all Opticon products are warranted against defects in materials and
workmanship for two years after purchase. Opticon will repair or, at its option, replace products that are defective
in materials or workmanship with proper use during the warranty period. Opticon is not liable for damages caused
by modifications made by a customer. In such cases, standard repair charges will apply. If a product is returned
under warranty and no defect is found, standard repair charges will apply. Opticon assumes no liability for any
direct, indirect, consequential or incidental damages arising out of use or inability to use both the hardware and
software, even if Opticon has been informed about the possibility of such damages.
Packaging
The packing materials are recyclable. We recommend that you save all packing material to use should you need
to transport your scanner or send it for service. Damage caused by improper packaging during shipment is not
covered by the warranty.
Trademarks
Trademarks used are the property of their respective owners.
Opticon Inc. and Opticon Sensors Europe B.V. are wholly owned subsidiaries of OPTOELECTRONICS Co., Ltd.,
12-17, Tsukagoshi 4-chome, Warabi-shi, Saitama, Japan 335-0002. TEL +81-(0) 48-446-1183; FAX +81-(0) 48446-1184
SUPPORT
USA Europe
Phone: 800-636-0090
Email: support@opticonusa.com Email: support@opticon.com
Web: www.opticonusa.com
Web: www.opticon.com
Specifications Manual
Revision History
Specification No. : (SS14022)
Product name : OPI-3301n
Edition Date Page Section Description of Changes
First 2014/10/20 - - Initial release
OPI-3301n
OPI-3301n
Specifications Manual
Contents
1. Abstract.............................................................................................................................................1
2. Overview............................................................................................................................................ 1
3. Basic Specifications......................................................................................................................... 2
4. Detailed View .................................................................................................................................... 5
5. Electrical Specifications..................................................................................................................6
5.1. Current Consumption................................................................................................................ 6
5.2. Operating Time and Charging Time ......................................................................................... 6
6. Interface Specifications...................................................................................................................6
6.1. Bluetooth ................................................................................................................................... 6
7. Optical Specifications...................................................................................................................... 7
7.1. Basic Optical Specifications...................................................................................................... 7
7.2. Aiming Pattern .......................................................................................................................... 8
7.3. Imaging Range.......................................................................................................................... 8
8. Technical Specifications..................................................................................................................9
8.1. Bar Code Test Sample............................................................................................................ 10
8.2. Scan Area and Depth of Field................................................................................................. 11
8.3. Printed Contrast Signal (PCS) ................................................................................................ 12
8.4. Minimum Resolution ............................................................................................................... 12
8.5. Wide Bar Code........................................................................................................................ 12
8.6. Pitch, Skew and Tilt ................................................................................................................ 13
8.7. Curvature ................................................................................................................................ 13
8.8. Auto Trigger ............................................................................................................................ 14
8.8.1. Stand Detection............................................................................................................. 14
8.8.2. Auto Trigger Operation.................................................................................................. 14
8.8.3. Motion Tolerance........................................................................................................... 15
9. Environmental Specifications....................................................................................................... 16
9.1. Temperature............................................................................................................................ 16
9.2. Humidity .................................................................................................................................. 16
9.3. Ambient Light Immunity .......................................................................................................... 16
9.4. Dust and Drip Proof ................................................................................................................ 16
9.5. Vibration Strength (without packing).......................................................................................16
9.6. Vibration Strength (in individual packing) ............................................................................... 17
9.7. Drop Impact Strength (without packaging) ............................................................................. 17
9.8. Drop Impact Strength (in individual packaging)...................................................................... 17
9.9. Electrostatic Discharge (ESD) Immunity................................................................................. 17
10. Regulatory Compliance ............................................................................................................... 18
10.1. LED Safety............................................................................................................................ 18
OPI-3301n
Specifications Manual
10.2. Product Safety ...................................................................................................................... 18
10.3. EMC ...................................................................................................................................... 18
10.4. Others ................................................................................................................................... 19
11. RoHS..............................................................................................................................................19
12. Reliability....................................................................................................................................... 19
13. Precautions................................................................................................................................... 19
13.1. Handling................................................................................................................................ 19
13.2. Radio Law ............................................................................................................................. 20
13.3. Bluetooth............................................................................................................................... 20
13.4. Frequency Baud.................................................................................................................... 20
14. Product Labels..............................................................................................................................21
15. Packaging Specifications............................................................................................................ 22
15.1. Individual Packaging ............................................................................................................. 22
15.2. Collective Packaging............................................................................................................. 23
16. Physical Features.........................................................................................................................24
16.1. Dimensions ........................................................................................................................... 24
16.2. Weight ................................................................................................................................... 24
16.3. Mechanical Drawing.............................................................................................................. 24
17. Supported Symbologies.............................................................................................................. 25
17.1. Default Setting ...................................................................................................................... 25
17.2. Supported Symbologies........................................................................................................ 25
17.2.1. 1D Bar Codes .............................................................................................................. 25
17.2.2. GS1 Databar, Composite Code................................................................................... 26
17.2.3. 2D Codes..................................................................................................................... 26
OPI-3301n
Specifications Manual
1. Abstract
This manual provides specifications for the OPI-3301n handheld Bluetooth 2D imager scanner.
2. Overview
The OPI-3301n is a handheld 2D imager scanner that enables high speed scanning of standard linear
(1D) and 2D symbologies. The scanned data is output via Bluetooth.
・ All bar code data scanned is transmitted to a host device through the Bluetooth interface.
・ The scanner can work with many Bluetooth-enabled host devices, such as PCs, tablet PCs and
smart phones.
・ Bluetooth SPP (Serial Port Profile) and HID (Human Interface Device Profile) are implemented.
・ The scanner can read bar codes from LCD screens.
・ A single green LED aiming line toward a target bar code can help the users find the appropriate
scanning position.
・ Special antimicrobial treatment is applied to the chassis, and alcohol can be used to wipe the
scanner clean (except for the scanning window and the logo panel).
・ The power source is 3.7 V 1100 mAh (typ.) lithium-ion battery.
・ A dedicated charging cradle CHG-3201 is supplied for recharging and easy storage of the
scanner.
1
3. Basic Specifications
Item Specification Note
CPU 32 bit CISC / 96 MHz
Section
Control
FROM 512 Kbyte + 32 Kbyte
OPI-3301n
Specifications Manual
SRAM 96 Kbyte
FROM (storage) 1 Mbyte
Section
Input
Key type 1 key: trigger
Indicator
LED 2 colors (red, green) and 1 color (blue)
Buzzer Loudness (3-level) / tone adjustable
Frequency 2402 ~ 2480 MHz
Interface
Bluetooth
Specification Bluetooth Ver 2.1 compliant
Communication
distance
10 m
Output level Class 2
Profile SPP / HID
Scan method WVGA (0.36 million-pixel) CMOS area sensor
Optical Section
Light source for illumination
2 red LEDs
Light source for aiming 1 green LED
Effective pixels 0.36 million pixels (H: 752 x V: 480)
View angle
Horizontal: about 40.6°
Vertical: about 26.4°
UPC-A, UPC-A Add-on, UPC-E, UPC-E Addon, EAN-13, EAN-13 Add-on, EAN-8, EAN-8
Add-on, JAN-8, JAN-13, Code 39, Tri-Optic,
NW-7, Industrial 2 of 5, Interleaved 2 of 5, S-
Symbologies
Code, IATA, Code 93, Code 128, MSI/Plessey,
UK/Plessey, TELEPEN, Code 11, Matrix 2 of
Supported 1D Symbologies
5, Chinese Post Matrix 2 of 5, Korean Postal
Authority code, Intelligent Mail Barcode,
POSTNET, JPN
Minimum resolution Code 39 : 0.127 mm
Curvature
Wide bar code
Motion Tolerance
R ≥ 16 mm (10-digit 0.15 mm Codabar)
R ≥ 20 mm (12-digit UPC)
100 mm wide 0.2 mm resolution Code 39
(DOF 115 mm) is readable:
UPC 100% moving at 2m/sec (DOF 80 mm)
is readable:
Resolution (0.127)
60 ~ 95
Code 39
Resolution (0.254)
45 ~ 185
For data area only
It may be shorter
depending on usage
environments
Max output 4 dBm
Frame rate: 60 fps
Refer to Chapter 17. for
details
PCS 0.9
PCS 0.9
Depth of Field
Resolution (0.508)
50 ~ 250
Code 128
Resolution (0.20)
UPC Resolution (0.33)
65 ~ 150
45 ~ 175
2
OPI-3301n
Specifications Manual
GS1/Composite
Symbologies
Minimum resolution
Symbologies
Supported 2D Symbologies
Minimum resolution (mm)
Depth of field
(mm)
Item Specification Note
PDF417
QR Code
GS1 DataBar, GS1 DataBar Limited, GS1
DataBar Expanded, Composite GS1 DataBar,
Composite GS1-128, Composite EAN,
Composite UPC
GS1 DataBar : 0.169 mm
Composite Code : 0.169 mm
PDF417, MicroPDF417, Codablock F, QR
Code, MicroQR Code, Data Matrix (ECC 0 140 / ECC 200), MaxiCode (Modes 2 to 5),
Aztec Code, Aztec Runes, Chinese-sensible
code, PLANET，Netherlands KIX，UK Postal，
Australian Postal
PDF417 : 0.169 mm
QR Code : 0.212 mm
DataMatrix : 0.212 mm
Resolution (0.169)
Resolution (0.254)
Resolution (0.212)
Resolution (0.381)
55 ~ 105
35 ~ 155
70 ~ 95
35 ~ 165
GS1 DataBar: formerly
called “RSS”
Refer to Chapter 17. for
details
Disable Code 128
when Codablock F is
enabled.
Refer to Chapter 17. for
details
PCS 0.9
PCS 0.9
DataMatrix Resolution (0.254)
Common
Scan angle
Pitch : ±50°
Skew : ±50°
Tilt : ±180°
Minimum PCS 0.3 or more
Power Section
Main battery Lithium-ion 1100 mAh (typ.)
Up-time 24 hours or more
65 ~ 120
MRD 32% or more
Charge the battery
before initial use
*1
Operating (charging) voltage 5.0 ~ 6.5V
Current
consumption
Charging Less than 1 A
Operating 0 ~ 50°C
Charging with charger
Temperature
Environmental Specifications
Humidity
Ambient light
immunity
Storage -20 ~ 60°C
Operating 20 ~ 85%
Storage 20 ~ 85%
Fluorescent 10,000 lx or less
Sunlight 100,000 lx or less
No condensing
No frost
UPC 100%, optical axis
angle 75°, distance 100 mm
10 Hz ~ 100 Hz, acceleration of 19.6 m/s2, 60
Vibration
minutes per cycle, repeat once in each X, Y
and Z-direction
Drop
Drop the scanner 30 times (6 faces x 5) from
the height of 150 cm onto a concrete floor
Dust and drip proof IP42 equivalent
*1: When a bar code is read twice every 10 seconds at room temperature in a const Bluetooth connection (SPP
master mode).
3
Item Specification Note
LED safety IEC 62471-1:2006 Exempt_Group
Regulatory Compliance
Product safety
EMC
Other
Immunity
Test
No distraction Air discharge (direct): ±15 kV
ESD
No malfunction
Features
Physical
Dimensions 113 × 56 × 132 (WDH mm)
EN60950-1:2005
IEC60950-1:2006
EN 55022:2010
EN 301 489-1 V1.9.2
EN 301 489-17 V2.1.1
EN 300 328 V1.8.1
FCC Part 15 Subpart C, Subpart B ClassB
VCCI Class B
Bluetooth logo certification
CE Marking
Certification for Construction Design of
Specified Radio Equipment
Contact discharge (direct / indirect): ±6 kV
Air discharge (direct): ±8 kV
OPI-3301n
Specifications Manual
Peak Wavelength
624 nm
For residential,
commercial and lightindustrial environments
Conditions:
IEC61000-4-2
compliant
Weight Approx. 130 g
Excluding accessories
4
4. Detailed View
OPI-3301n
Specifications Manual
3
2
1
5
Figure 1: Detailed View of OPI-3301n
No Name Description
1 Trigger Key A key to read bar codes
2 Scan Window LED illumination is emitted from this window to read bar codes.
3 Status LED
4 Buzzer Holes A sound from a built-in buzzer comes out through these holes.
5 Charging terminals Charging pins connected to the dedicated charging cradle CHG-3201
The operating statuses, such as bar code reading, Bluetooth connection
and warning, are indicated by different colors.
5
Loading...