Onkyo CR-505DAB User Manual

CD Receiver

CR-505DAB

Instruction Manual

Thank you for purchasing an Onkyo CD Receiver. Please read this manual thoroughly before making connections and turning on the power.

Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new CD Receiver.

Please retain this manual for future reference.

Contents

Introduction	2

Connections 11

Getting Started	16

CD/MP3 Playback	20

DAB	24

FM/AM	28

Using Other Functions 31

Appendix	35

En

PORTABLE CART WARNING

S3125A

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING		AVIS
RISK OF ELECTRIC SHOCK		RISQUE DE CHOC ELECTRIQUE
DO NOT OPEN		NE PAS OUVRIR

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Important Safety Instructions

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15.Damage Requiring Service

Unplug the apparatus from the wall outlet and refer servicing to qualified service personnel under the following conditions:

A.When the power-supply cord or plug is damaged,

B.If liquid has been spilled, or objects have fallen into the apparatus,

C.If the apparatus has been exposed to rain or water,

D.If the apparatus does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the apparatus to its normal operation,

E.If the apparatus has been dropped or damaged in any way, and

F.When the apparatus exhibits a distinct change in performance this indicates a need for service.

16.Object and Liquid Entry

Never push objects of any kind into the apparatus through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock.

The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases shall be placed on the apparatus.

Don’t put candles or other burning objects on top of this unit.

17.Batteries

Always consider the environmental issues and follow local regulations when disposing of batteries.

18.If you install the apparatus in a built-in installation, such as a bookcase or rack, ensure that there is adequate ventilation.

Leave 20 cm (8") of free space at the top and sides and 10 cm (4") at the rear. The rear edge of the shelf or board above the apparatus shall be set 10 cm (4") away from the rear panel or wall, creating a flue-like gap for warm air to escape.

2

Precautions

1.Recording Copyright

Unless it’s for personal use only, recording copyrighted material is illegal without the permission of the copyright holder.

2.AC Fuse

The AC fuse inside the CR-505DAB is not user-service- able. If you cannot turn on the CR-505DAB, contact your Onkyo dealer.

3.Care

Occasionally you should dust the CR-505DAB all over with a soft cloth. For stubborn stains, use a soft cloth dampened with a weak solution of mild detergent and water. Dry the CR-505DAB immediately afterwards with a clean cloth. Don’t use abrasive cloths, thinners, alcohol, or other chemical solvents, because they may damage the finish or remove the panel lettering.

4.Power WARNING

BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ THE FOLLOWING SECTION CAREFULLY.

AC outlet voltages vary from country to country. Make sure that the voltage in your area meets the voltage requirements printed on the CR-505DAB’s rear panel (AC 230 -240 V, 50 Hz).

Setting the [STANDBY/ON] switch to STANDBY does not fully shutdown the CR-505DAB. If you do not intend to use the CR-505DAB for an extended period, remove the power cord from the AC outlet.

5.Never Touch This Unit with Wet Hands

Never handle this unit or its power cord while your hands are wet or damp. If water or any other liquid gets inside this unit, have it checked by your Onkyo dealer.

6.Installing This Unit

•Install this unit in a well-ventilated location.

•Ensure that there’s adequate ventilation all around this unit, especially if it’s installed in an audio rack. If the ventilation is inadequate, the unit may overheat, leading to malfunction.

•Do not expose this unit to direct sunlight or heat sources, because its internal temperature may rise, shortening the life of the optical pickup.

•Avoid damp and dusty places, and places subject to vibrations from loudspeakers. Never put the unit on top of, or directly above, a loudspeaker.

•Install this unit horizontally. Never use it on its side or on a sloping surface, because it may cause a malfunction.

•If you install this unit near a TV, radio, or VCR, the sound quality may be affected. If this occurs, move this unit away from the TV, radio, or VCR.

7.Moisture Condensation

Moisture condensation may damage this unit.

Read the following carefully:

When you take a glass containing a cold drink outside on a summer’s day, drops of water, called condensation, form on the outside of the glass. Similarly, moisture may condense on the lens of the optical pickup, one of the most important parts inside this unit.

•Moisture condensation can occur in the following situations:

—The unit is moved from a cold place to a warm place.

—A heater is turned on, or cold air from an air conditioner is hitting the unit.

—In the summer, when this unit is moved from an air conditioned room to a hot and humid place.

—The unit is used in a humid place.

•Do not use this unit when there’s the possibility of moisture condensation occurring. Doing so may damage your discs and certain parts inside this unit.

If condensation does occur, remove all discs and leave this unit turned on for two to three hours. By this time, the unit will have warmed up and any condensation will have evaporated. To reduce the risk of condensation, keep this unit connected to a wall outlet.

For British models

Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel.

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code:

Blue: Neutral

Brown: Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire that is coloured blue must be connected to the terminal that is marked with the letter N or coloured black. The wire that is coloured brown must be connected to the terminal that is marked with the letter L or coloured red.

IMPORTANT

A 3, 5 or 13 ampere fuse is fitted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating of 3, 5 or 13 amperes and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark or the BSI mark on the body of the fuse.

IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13 AMPERE SOCKET.

If in any doubt, consult a qualified electrician.

3

Precautions—Continued

This unit contains a semiconductor laser system and is classified as a “CLASS 1 LASER PRODUCT.” So, to use this model properly, read this Instruction Manual carefully. In case of any trouble, please contact the store where you purchased the unit. To prevent exposure to the laser beam, do not try to open the enclosure.

DANGER:

VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. DO NOT STARE INTO BEAM.

CAUTION:

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

This label is located on the side of the unit. It indicates that:

1.This unit is a CLASS 1 LASER PRODUCT and employs a laser inside the cabinet.

2.To prevent the laser from being exposed, do not remove the cover. Refer servicing to qualified personnel.

Declaration of Conformity

We, ONKYO EUROPE ELECTRONICS GmbH LIEGNITZERSTRASSE 6, 82194 GROEBENZELL, GERMANY

declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding technical standards such as EN60065, EN55013, EN55020 and EN61000-3-2, -3-3.

GROEBENZELL, GERMANY

I. MORI

ONKYO EUROPE ELECTRONICS GmbH

Memory backup

The CR-505DAB uses a battery-less memory backup system in order to retain radio presets and other settings when it’s unplugged or in case of a power failure. Although no batteries are required, the CR-505DAB must be plugged into an AC outlet in order to charge the backup system. Once it has been charged, the CR-505DAB will retain the settings for several weeks, although this depends on the environment and retention will be shorter in humid climates. The clock setting is not retained by the backup system.

4

Table of Contents

Introduction
Important Safety Instructions ................	2
Precautions .............................................	3
Features ...................................................	6
Supplied Accessories.............................	6
Before Using the CR-505DAB ................	7
Installing the Remote Controller Batteries......	7
Using the Remote Controller ..........................	7
Controls & Connectors...........................	8
Front Panel.....................................................	8
Rear Panel .....................................................	9
Remote Controller ........................................	10
Connections
Connecting Your Speakers ..................	11
Connecting the Speaker Cords to the
Speaker Connectors ..................................	11
Connecting an Antenna........................	12
Connecting the Indoor FM Antenna .............	12
Connecting the AM Loop Antenna ...............	12
Connecting an Outdoor FM Antenna............	13
Connecting an Outdoor AM Antenna ...........	13
Connecting the DAB Antenna ......................	13
Connecting Your Other Components to
the CR-505DAB ...................................	14
Before Making Any Connections ..................	14
Connecting -compatible
Components ........................................	15
Getting Started
Powering Up and Setting the Clock ....	16
Powering Up the CR-505DAB ......................	16
ACCUCLOCK Function ................................	16
Setting the Clock Manually...........................	18
Displaying the Date & Time..........................	18
Displaying the Time in Standby Mode..........	18
Using the CR-505DAB ..........................	19
Selecting Sound Sources .............................	19
Adjusting the Volume ...................................	19
Using Headphones.......................................	19
CD/MP3 Playback
Playing CDs ...........................................	20
Playing CDs..................................................	20
Selecting Tracks by Number ........................	20
Displaying Information..................................	21
Various Playback ..................................	22
Repeat Playback ..........................................	22
Random Playback ........................................	22
Memory Playback.........................................	23

DAB
Using DAB .............................................	24
Using DAB....................................................	24
Ensemble Search Mode ...............................	24
Component Search Mode ............................	25
Sorting Components.....................................	25
Sorted List Search Mode..............................	25
Presetting Components................................	26
Preset Search Mode.....................................	26
Deleting Presets ...........................................	26
Copying Preset Channels.............................	27
Displaying DAB Information .........................	27
FM/AM
Using the Radio.....................................	28
Listening to the Radio...................................	28
Tuning the Radio ..........................................	28
Presetting FM Stations Automatically...........	29
Presetting Stations Manually........................	29
Selecting Presets .........................................	29
Deleting Presets ...........................................	30
Copying Preset Channels.............................	30
RDS (Radio Data System) ...........................	30
Using Other Functions
Other Functions ....................................	31
Muting the CR-505DAB................................	31
Adjusting the Bass & Treble .........................	31
Using Direct Mode........................................	31
Timers ....................................................	32
About the Timers ..........................................	32
Setting the Timers ........................................	32
Turning Timers Off .......................................	34
Checking Timer Settings ..............................	34
Using the Sleep Timer..................................	34
Appendix
Disc Notes ..............................................	35
Troubleshooting ....................................	37
Specifications ........................................	40

5

Features

Amp

■25W/Ch into 6 ohms (1 kHz, 10%)

■High Current, Low Impedance Drive

■Discrete Output Stage Circuitry

■Tone Control for Treble and Bass

■Tone Direct

■3 Audio Inputs and 2 Outputs for TAPE, MD, LINE

■Optical Digital Output

CD Player

■Plays Music CDs and MP3 CDs

■Wolfson Single-Bit D/A Converter

■20 Track Memory Playback

Tuner

■DAB Tuning

■59 Presets for DAB

■40 Presets for AM and FM

■Automatic FM Scan Tuning

■RDS (CT/PS/RT)

Others

■Aluminum Volume Knob & Front Panel

■-Compatible Remote Control

■5-Mode Timer (Timer 1, 2, 3, 4/Sleep)

Supplied Accessories

Check that the following accessories are supplied with this unit.

AM loop antenna	FM indoor antenna	Remote controller (RC-581S)
		two batteries (AAA/R03)

DAB antenna

*In catalogs and on packaging, the letter added to the end of the product name indicates the color of the CR-505DAB. Specifications and operation are the same regardless of color.

6

Before Using the CR-505DAB

Installing the Remote Controller

Batteries

1 Open the battery compartment, as shown.

2 Insert the two supplied batteries (AAA/

R03) in accordance with the polarity diagram inside the battery compartment.

3 Close the battery compartment.

Notes:

•The supplied batteries should last for about six months, although this will vary with usage.

•If the remote controller doesn’t work reliably, try replacing both batteries.

•Don’t mix new and old batteries, or different types of batteries.

•If you intend not to use the remote controller for a long time, remove the batteries to prevent possible leakage and corrosion.

•Drained batteries should be removed as soon as possible to prevent possible leakage and corrosion.

Using the Remote Controller

To use the remote controller, point it at the CR-505DAB’s remote control sensor, as shown below.

CR-505DAB

Remote control sensor

5 m

Notes:

•The remote controller may not work reliably if the CR505DAB is subjected to bright light, such as direct sunlight or inverter type fluorescent lights. Keep this in mind when installing the CR-505DAB.

•If another remote controller of the same type is used in the same room, or the CR-505DAB is installed close to equipment that uses infrared rays, the remote controller may not work reliably.

•Don’t put anything, such as a book, on the remote controller, because the buttons may be pressed inadvertently, thereby draining the batteries.

•The remote controller may not work reliably if the CR505DAB is installed in a rack behind colored glass doors. Keep this in mind when installing the CR-505DAB.

•The remote controller will not work if there’s an obstacle between it and the CR-505DAB’s remote control sensor.

7

Controls & Connectors

Front Panel

For detailed information, refer to the pages in parentheses.

1		2		Disc Tray				Display	3 4
									VOLUME
								MIN	MAX
	STANDBY / ON	PHONES	INPUT	MENU	DIRECT	BASS	TREBLE	PRESET

PUSH TO ENTER

5 6 7 8 9 0 A B C

1Remote control sensor (7)

Receives control signals from the remote controller.

2Standby indicator (16)

Lights up when the CR-505DAB is in Standby mode.

3VOLUME control (19)

Adjusts the volume.

4[] button (20)

Opens and closes the disc tray.

5STANDBY/ON button (16)

Sets the CR-505DAB to On or Standby.

6PHONES jack (19)

Used to connect a pair of stereo headphones.

7INPUT selector button (19, 28)

Used to select sound sources: CD, DAB, FM, AM, TAPE, MD or LINE.

8MENU button (22-30)

Displays the Tuner menu.

Selects the play mode for CD or MP3.

9DIRECT button (31)

Used to select “Tone Direct On” or “Tone Direct Off.”

0BASS control (31)

Adjusts the Bass sound while the Tone Direct Off is selected.

ATREBLE control (31)

Adjusts the Treble sound while the Tone Direct Off is selected.

B[/] (PRESET [ /]) control (20, 23-30)

Turn this to select the track, and push to start playing. You can also select the Preset while the FM or AM is selected.

CStop [] & Play/Pause [/] buttons (20)

Used to stop, start, and pause playback.

8

Controls & Connectors—Continued

Rear Panel

For detailed information, refer to the pages in parentheses.

1 2 3 4

	REMOTE	DAB	FM75
	CONTROL			AM
		ANTENNA

5 6 7

		R	SPEAKERS
OPTICAL	SUB		L
DIGITAL	WOOFER
OUT	PRE OUT

L

IN

IN

IN

R

TAPE MD LINE

L

OUT OUT

R

8 9 0

1 REMOTE CONTROL (15)

This (Remote Interactive) connector can be connected to the connector on another Onkyo component. To use, you must make an analog RCA/phono connection between the CR-505DAB and your other component, even if they are connected digitally.

2DAB ANTENNA (13)

This connector is for connecting the supplied DAB antenna. CR-505DAB only scans UK Band III.

3FM 75 Ω ANTENNA (12, 13)

This connector is for connecting an FM antenna.

4AM ANTENNA (12, 13)

These push terminals are for connecting an AM antenna.

5 OPTICAL DIGITAL OUT (14, 15)

6SUBWOOFER PRE OUT (11)

This RCA/phono connector can be used to connect an active subwoofer.

7SPEAKERS (11)

These terminals are for connecting left and right speakers.

8TAPE IN/OUT (14)

These RCA/phono connectors can be used to connect a cassette tape deck or other recorder with analog inputs and outputs.

9MD IN/OUT (14, 15)

These RCA/phono connectors can be used to connect a Mini Disc recorder or other recorder with analog inputs and outputs.

0 LINE IN (14)

This connector can be used to connect a Mini Disc recorder or other component with digital input.

These RCA/phono connectors can be used to connect another component.

9

Controls & Connectors—Continued

Remote Controller

STANDBY/ON CLOCK

CALL

2	3
1	TIMER
5	6
4
8	9
7
--/---	CLEAR
10/0	ENTER
DISPLAY	MODE
SLEEP	REPEAT
MUTING	INPUT

DAB FM AM DIRECT

CD

MD

TAPE

ACLOCK CALL button— Used to display the current time.

B TIMER button— Used to set the timers.

CUp [] & Down [] buttons— Used to set the timers.

D CLEAR button— Used with memory playback.

E ENTER button— Used to set the timers.

FMODE button— Used to set Random Play or Memory Play.

G REPEAT button— Used with repeat playback.

HINPUT [] [] selector buttons— Used to select sound sources.

I MUTING button— Used to mute the CR-505DAB.

JPrevious [] & Next [] buttons (PRESET buttons)— Used to select the previous or next track when playing CDs, or to select presets when using the radio.

KDIRECT button— Used to select “Tone Direct On” or “Tone Direct Off.”

Controlling an Onkyo Cassette Tape Deck

An Onkyo Cassette Tape Deck connected via (page 15) can be controlled as follows:

1.Use the INPUT []/[] selector buttons to select the TAPE source.

2.Use the following buttons.

RC-581S

1STANDBY/ON button— Sets the CR-505DAB to On or Standby.

2 Number buttons— Used to select CD tracks.

3 DISPLAY button— Used to display information.

4 SLEEP button— Used with the Sleep function.

5VOLUME UP [] & DOWN [] buttons— Used to set the volume.

6Fast Reverse [] & Fast Forward [] buttons (TUNING buttons)— Used for fast reverse and fast forward when playing CDs, or for tuning when using the radio.

7 AM button— Used to select AM tuner.

8 FM button— Used to select FM tuner.

9 DAB button— Used to select DAB tuner.

0 CD control buttons— Used to control CD playback.

MUTING INPUT

		[	] ..................	Fast reverse
		[	] ..................	Fast forward
DAB FM AM	DIRECT	[	]	Other-side play
CD		[	]	Stop
MD		[	]	Play
TAPE

Controlling an Onkyo Mini Disc Recorder

An Onkyo Mini Disc Recorder connected via (page 15) can be controlled as follows:

1.Use the INPUT []/[] selector buttons to select the MD source.

2.Use the following buttons.

	SLEEP	REPEAT	[	] ...................	Fast reverse
			[	] ...................	Fast forward
	MUTING	INPUT	[	]	Previous track
			[	] ..................	Next track
	DAB FM AM	DIRECT	[	]......................	Pause
			[	]	Stop
	CD
	MD		[	] .....................	Play
	TAPE		[REPEAT] ..........		Repeat mode

10

Connecting Your Speakers

Before you connect your speakers, read the following:

•Disconnect the power cord from the wall outlet.

•Read the instructions supplied with your speakers.

•Pay close attention to speaker wiring polarity. In other words, connect positive (+) terminals only to positive (+) terminals, and negative (–) terminals only to negative (–) terminals. If you get them the wrong way around, the sound will be out of phase and will sound odd.

•Only use speakers with an impedance of 4 ohms or higher. If you use speakers with a lower impedance, and use the amplifier at high volume levels for a long period of time, the built-in protection circuit may be activated.

•Unnecessarily long or very thin speaker cables may affect the sound quality and should be avoided.

•Be careful not to short the posi-

tive and negative connections. NO

Doing so may damage the CD Receiver.

• Don’t connect more than one cable to each speaker terminal. Doing so may damage the CD Receiver.

•If you want to connect a single speaker instead of a pair, connect it to either the left or right speaker terminals, not both.

Connecting the Speaker Cords to the Speaker Connectors

1 Strip 10 mm from the

end of each cord.	10 mm (7/16“)

2 Twist the stripped end of the cord.

3 Push the lever up.

4 Insert the stripped end of the cord.

NO	NO
SPEAKERS	SPEAKERS
R L	R L

Powered

subwoofer

LINE INPUT

5 Press down the lever. The wire of the stripped end of the cord should appear slightly.

SUB

WOOFER

PRE OUT

REMOTE	DAB	FM75
CONTROL			AM
	ANTENNA
L
IN	IN		IN
R

		R	SPEAKERS
OPTICAL	SUB		L
DIGITAL	WOOFER
OUT	PRE OUT

R	SPEAKERS
	L

TAPE MD LINE

L

OUT OUT

R

The SUBWOOFER PRE OUT should be connected to the

input on your powered subwoofer. If your subwoofer doesn’t have an amp built-in, you’ll need to use an exter-

nal amp. See the manual supplied with your subwoofer for

more information. Right Left speaker speaker

11

Connecting an Antenna

This chapter explains how to connect the supplied indoor FM antenna, AM loop antenna, and DAB antenna and how to connect commercially available outdoor FM and AM antennas.

The CD Receiver won’t pick up any radio signals without any antenna connected, so you must connect an antenna to use the tuner.

DAB antenna socket

FM antenna socket

AM antenna push terminals

					R	SPEAKERS
			OPTICAL	SUB		L
			DIGITAL	WOOFER
REMOTE	DAB	FM75	OUT	PRE OUT
CONTROL
	ANTENNA		AM

L

IN

IN

IN

R

TAPE MD LINE

L

OUT OUT

R

Connecting the Indoor FM Antenna

The supplied indoor FM antenna is for indoor use only.

1 Attach the FM antenna, as shown.

FM75

ANTENNA

Once the CD Receiver is ready for use, you’ll need to tune into an FM radio station and adjust the position of the FM antenna to achieve the best possible reception.

2 Use thumbtacks or something similar to fix the FM antenna into position.

Connecting the AM Loop Antenna

The supplied indoor AM loop antenna is for indoor use only.

1 Assemble the AM loop antenna, inserting the tabs into the base, as shown.

2 Connect both wires of the AM loop antenna to the AM push terminals, as shown.

(The antenna’s wires are not polarity sensitive, so they can be connected in either push terminal.)

Make sure that the wires are attached securely and that the push terminals are gripping the bare wires, not the insulation.

Push

Insert wire

Release

AM

Once the CD Receiver is ready for use, you’ll need to tune into an AM radio station and adjust the position of the AM antenna to achieve the best possible reception. Keep the antenna as far away as possible from the CD Receiver, TV, speaker cables, and power cords.

If you cannot achieve good reception with the supplied indoor AM loop antenna, try using a commercially available outdoor AM antenna (see page 13).

Caution: Be careful that you don’t injure yourself when using thumbtacks.

If you cannot achieve good reception with the supplied indoor FM antenna, try using a commercially available outdoor FM antenna instead (see page 13).

12