11. PARTS LIST ······················································21
12. OPTIONAL PARTS ···········································23
NOTE:
• This manual describes technical data of indoor units
• As for outdoor units MUCFH-A18/A24WV-, refer to the service manual OB337 REVISED EDITION-A.
• As for outdoor unit MUH-A12YV-, refer to the service manual OB331 REVISED EDITION-A.
• As for outdoor units MXZ-A18/A26/A32WV-, refer to the service manual OB319.
E1
E1
E1
(When installed on the floor)
(When the air inlet grille is opened.)
Deodorizing filter
(gray sponge type)(option)
Air filter
Air inlet
Operation section
Air cleaning filter
(white bellows type)(option)
Front panel
Receiving section
Operation indicator lamp
Horizontal vane
Vertical vanes
Emergency
operation switch
(When installed on the ceiling)
ACCESSORIES
Item
Installation plate
Unit fixing screw
5 o 12mm
Wireless remote
controller
Remote controller
mounting hardware
Fixing screw for
3.5 o 16mm (Black)
Battery (AAA) for
remote controller
Drain hose
Drain pipe cover
Knockout cover
Screw for 4 o 10mm
2
2
1
1
2
2
1
1
1
2
Q'ty
Remote controller
Revision A:
•Power input of SPECIFICATION has modified.
•Model name of remote controller has been added to PARTS LIST.
1
MCFH-13NV-➔ MCFH-A12WV-
1. Rated voltage has changed. (220-240V ➔ 230V)
2. Indoor electronic control P.C. board has changed.
3. Horizontal vane has changed.
4. Terminal block has changed.
5. Indoor heat exchanger has changed.
6. Remote controller has changed.
Econo cool operation has been added.
7. Indoor fan motor has changed. (RB4V25-AB ➔ RB4V25-AC)
MCFH-24NV-➔ MCFH-A24WV-
1. Rated voltage has changed. (220-240V ➔ 230V)
2. Indoor electronic control P.C. board has changed.
3. Horizontal vane has changed.
4. Terminal block has changed.
5. Indoor heat exchanger has changed.
6. Remote controller has changed.
Econo cool operation has been added.
7. Liquid of union has changed. ({9.52 ➔ {6.35)
8. Indoor fan motor has changed. (RB4V36-AB ➔ RB4V36-DB)
2
TECHNICAL CHANGES
E1E4
E1E3
PART NAMES AND FUNCTIONS
MCFH-18NV-➔ MCFH-A18WV-
1. Rated voltage has changed. (220-240V ➔ 230V)
2. Indoor electronic control P.C. board has changed.
3. Horizontal vane has changed.
4. Terminal block has changed.
5. Indoor heat exchanger has changed.
6. Remote controller has changed.
Econo cool operation has been added.
7. Gas of union has changed. ({15.88 ➔ {12.7)
8. Indoor fan motor has changed. (RB4V36-AB ➔ RB4V36-AC)
E1E3
MCFH-A12WV -MCFH-A18WV -MCFH-A24WV -
INDOOR UNIT
E1E1E1
2
MCFH-A12WV -
ON/OFF
FAN
TOO
WARM
TOO
COOL
VANE
MODE
ECONO COOL
STOP
START
HR.
MIN.
I FEEL
COOL
HEAT
DRY
PM
CLOCK
AM
RESET CLOCK
ON/OFF
TOO
COOL
PM
AM
TOO
WARM
Open the front lid.
Signal transmitting section
Operation display section
OPERATE /STOP
(ON /OFF)button
TEMPERATURE buttons
OPERATION SELECT button
FAN SPEED CONTROL button
OFF-TIMER button
ON-TIMER button
RESET button
ECONO COOL button
VANE CONTROL button
CLOCK SET button
HR. button
MIN. button
(TIME SET button)
Indication of remote controller model
is on back.
MCFH-A18WV MCFH-A24WV -
REMOTE CONTROLLER
E1
E1
E1
3
3
Indoor model
Function
Power supply
Air flow(High/Med.W/LowW)
Power outlet
Running current
Power input
Auxiliary heater
Power factor
Fan motor current
Model
Winding
resistance(at20:)
Dimensions WOHOD
Weight
Air direction
Sound level(High/Med.W/LowW)
Fan speed(High/Med.W/LowW)
Fan speed regulator
Thermistor RT11(at25:)
Thermistor RT12(at25:)
Remote controller model