IMMERSIVE SOUND LCD HDTV
with Integrated Sound Projector
MODELS
151 Series
LT-40151, LT-46151, LT-52151
153 Series
LT-40153, LT-46153, LT-52153
OWNER’S GUIDE
•Guidelines for setting up and using your new widescreen TV start on page 7.
•For questions:
-- Visit our website at www.mitsubishi-tv.com. -- E-mail us at MDEAservice@mdea.com.
-- Call Consumer Relations at 800-332-2119.
•For information on System Reset, please see the back cover.
•To order replacement or additional remote controls, visit our website at www.mitsuparts.com or call 800-553-7278.
•153 Series. IR emitter cables for NetCommand home-theater control are available for purchase from Mitsubishi. Call 800-553-7278 and request either part number 242D483020 (two-ended cable) or part number 299P254020 (four-ended cable).
For Your Records
Record the model number, serial number, and purchase date of your TV. The model and serial numbers are on the back of the TV. Refer to this page when requesting assistance with the TV.
MODEL NUMBER
SERIAL NUMBER
PURCHASE DATE
RETAILER NAME LOCATION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user of the presence of uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
WARNING: This product shall be connected to a MAINS socket outlet with a protective earthing connection.
MAINS DISCONNECTION: The mains plug is used as the disconnect device. The mains plug shall remain readily operable.
TV WEIGHT: This TV is heavy. Exercise extreme care when lifting or moving it. Lift or move the TV with a minimum of two adults. To prevent damage to the TV, avoid jarring or moving it while it is turned on. Always power off your TV, unplug the power cord, and disconnect all cables before moving it.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
WARNING: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
FCC Declaration of Conformity
Product: |
LCD Flat Panel HDTV |
Models: |
LT-40151, LT-46151, LT52151 |
|
LT-40153, LT-40153, LT-52153 |
Responsible |
Mitsubishi Digital Electronics |
Party: |
America, Inc. |
|
9351 Jeronimo Road |
|
Irvine, CA 92618-1904 |
Telephone: |
(800) 332-2119 |
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and the receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/ TV technician for help.
Changes or modifications not expressly approved by Mitsubishi could cause harmful interference and would void the user’s authority to operate this equipment.
Features and specifications described in this owner’s guide are subject to change without notice.
Contents |
|
|
|
Important Safety Instructions. . . . . . . . . . . . . . . . |
4 |
|
Important Information About Your TV.. . . . . . . . . . |
5 |
|
Special Features of Your TV. . . . . . . . . . . . . . . . . |
6 |
1 |
Basic Setup and Operation |
|
|
Package Contents. . . . . . . . . . . . . . . . . . . . . . . . |
7 |
|
Stand Installation.. . . . . . . . . . . . . . . . . . . . . . . . |
8 |
|
Wall-Mounting.. . . . . . . . . . . . . . . . . . . . . . . . . . |
8 |
|
Before You Begin.. . . . . . . . . . . . . . . . . . . . . . . . |
9 |
|
First-Time Power-On.. . . . . . . . . . . . . . . . . . . . . . |
9 |
|
TV Controls.. . . . . . . . . . . . . . . . . . . . . . . . . . . |
10 |
|
Setting Up TV Inputs. . . . . . . . . . . . . . . . . . . . . |
12 |
|
Basic TV Operation. . . . . . . . . . . . . . . . . . . . . . |
14 |
2 |
TV Connections |
|
|
Before You Begin.. . . . . . . . . . . . . . . . . . . . . . . |
16 |
|
Cable Management. . . . . . . . . . . . . . . . . . . . . . |
16 |
|
Inputs and Outputs. . . . . . . . . . . . . . . . . . . . . . |
17 |
|
Y Pb Pr Component Video Device. . . . . . . . . . . . |
19 |
|
HDMI Device.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
19 |
|
DVI Video Device. . . . . . . . . . . . . . . . . . . . . . . . |
20 |
|
Composite Video Device.. . . . . . . . . . . . . . . . . . |
20 |
|
Antenna or Cable TV Service.. . . . . . . . . . . . . . . |
20 |
|
VCR or DVD Recorder to an Antenna or |
|
|
Wall Outlet Cable.. . . . . . . . . . . . . . . . . . . . . . |
21 |
|
VCR or DVD Recorder to a Cable Box .. . . . . . . . |
21 |
|
A/V Receiver.. . . . . . . . . . . . . . . . . . . . . . . . . . |
22 |
|
A/V Receiver with HDMI Output.. . . . . . . . . . . . . |
22 |
|
Subwoofer.. . . . . . . . . . . . . . . . . . . . . . . . . . . . |
23 |
|
Audio-Only Device.. . . . . . . . . . . . . . . . . . . . . . |
23 |
3 |
Using TV Features |
|
|
Selecting an Input. . . . . . . . . . . . . . . . . . . . . . . |
24 |
|
Sleep Timer.. . . . . . . . . . . . . . . . . . . . . . . . . . . |
24 |
|
ChannelView Channel Listings.. . . . . . . . . . . . . . |
25 |
|
Redirecting Audio Output. . . . . . . . . . . . . . . . . . |
25 |
|
Controlling A/V Receiver Volume.. . . . . . . . . . . . |
25 |
|
Status Display. . . . . . . . . . . . . . . . . . . . . . . . . . |
26 |
|
TV Signals and Display Formats. . . . . . . . . . . . . |
27 |
|
Using the TV with a Personal Computer.. . . . . . . |
28 |
|
Camera Images and Music Files. . . . . . . . . . . . . |
30 |
|
Sound Projector.. . . . . . . . . . . . . . . . . . . . . . . . |
33 |
|
Introduction to Home-Theater Control. . . . . . . . . |
36 |
4 TV Menus |
|
Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . |
37 |
Menu Navigation. . . . . . . . . . . . . . . . . . . . . . . . |
37 |
Adjust.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
38 |
Captions.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
43 |
Initial.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
44 |
Inputs.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
47 |
Lock.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
49 |
5 NetCommand IR Control |
|
About NetCommand IR Control.. . . . . . . . . . . . . |
52 |
IR Emitter Placement. . . . . . . . . . . . . . . . . . . . . |
53 |
Initial NetCommand Setup. . . . . . . . . . . . . . . . . |
54 |
Operating NetCommand-Controlled Devices. . . . |
55 |
6NetCommand IR Control of an A/V Receiver
Controlling an A/V Receiver after NetCommand
Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Setting Up A/V Receiver Control
Power and Volume. . . . . . . . . . . . . . . . . . . . 59 Automatic Switching (Audio or Audio/Video).. 60
Appendices
Appendix A: Bypassing the Parental Lock. . . . . . 65
Appendix B: Programming the Remote Control. . 67
Appendix C: HDMI Control of CEC Devices.. . . . 74
Appendix D: TV Care.. . . . . . . . . . . . . . . . . . . . 77
Appendix E: Troubleshooting. . . . . . . . . . . . . . . 78
Trademark and License Information.. . . . . . . . . . 85
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
4
Important Safety Instructions |
|
|
Please read the following safeguards for your TV and |
E XAMP LE OF ANTE NNA GR OUNDING |
|
retain for future reference. Always follow all warnings |
||
|
||
and instructions marked on the television. |
|
1)Read these instructions.
2)Keep these instructions.
3)Heed all warnings.
4)Follow all instructions.
5)Do not use this apparatus near water.
6)Clean only with dry cloth.
7)Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9)Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10)Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11)Only use attachments/accessories specified by the manufacturer.
12)Use only with the cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When
a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13)Unplug this apparatus
during lightning storms or when unused for long periods of time.
14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
|
|
|
|
|
|
|
ANTE NNA |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LE AD IN WIR E |
GR OUND C LAMP |
|
|
|
||||
|
|
|
|
|
|
|
ANTE NNA |
|
|
|
|
|
|
|
DIS C HAR GE UNIT |
E LE C TR IC |
|
|
(NE C AR TIC LE 810-20) |
||||
|
|
|
|||||
S E R VIC E |
|
GR OUNDING |
|||||
E QUIP ME NT |
|
||||||
|
C ONDUC TOR S |
||||||
|
|
|
|
|
|
||
|
|
|
|
|
|
(NE C AR TIC LE 810-21) |
|
|
|
|
|
|
|
GR OUND C LAMP S |
|
|
|
|
|
|
|
||
|
|
|
|
|
|||
|
|
|
|
|
|
P OWE R S E R VIC E GR OUNDING |
|
|
|
|
|
|
|
E LE C TR ODE S YS TE M |
|
NE C — NATIONAL E LE C TR IC AL C ODE |
|
(NE C AR T 250, P AR T H) |
Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.
Replacement Parts
When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
5
Installation Notes
For stand installation and wall-mounting, see page 8.
Use with other than the authorized accessories may cause the TV to become unstable, which can cause damage to the product or possible injury.
Custom cabinet installation must allow for proper air circulation around the television.
NOTE TO CATV SYSTEM INSTALLER: THIS REMINDER IS PROVIDED TO CALL THE CATV SYSTEM INSTALLER’S ATTENTION TO ARTICLE 820-40 OF THE NEC THAT PROVIDES GUIDELINES FOR THE PROPER GROUNDING AND, IN PARTICULAR, SPECIFIES THAT THE CABLE GROUND SHALL BE CONNECTED TO THE GROUNDING SYSTEM OF
THE BUILDING, AS CLOSE TO THE POINT OF CABLE ENTRY AS PRACTICAL.
TV Software
Do not attempt to update the software of this TV with software or USB drives not provided by or authorized by Mitsubishi Digital Electronics America, Inc. Non-authorized software may damage the TV and will not be covered by the warranty.
If Your TV Gets Damaged
Crystalline liquid may leak from the LCD panel and broken glass may be scattered.
CAUTION: The crystalline liquid is toxic. Avoid contact with your skin, eyes, or mouth. DO NOT touch the broken glass or crystalline liquid. DO NOT get glass fragments or crystalline liquid into eyes or mouth.
Should either contact with your eyes or mouth, rinse the contacted area thoroughly with water and consult your doctor.
Disposal of Your TV
The LCD panel contains a small amount of crystalline liquid and the fluorescent tube in the panel contains mercury. Both are toxic and should not be touched.
DO NOT dispose of the TV with general household waste. THE LAMPS INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE, AND FEDERAL LAWS. For disposal or recycling information, contact your local authorities or the Electronic Industries Alliance at www.eiae.org.
6
Your new high-definition widescreen television has many special features that make it the perfect center of your home entertainment system, including:
1080p High-Definition LCD Display System
Your Mitsubishi LCD Flat Panel HDTV uses a full 1920 x 1080 LCD panel to create the picture you see on the screen. All images are displayed at 1080p. The TV uses new Plush 1080p® 5G digital video processing to convert lower-resolution signals to 1080p for display.
Smooth120Hz™ Film Motion
Smooth120Hz™ Film Motion makes fast-moving images appear smoother and more fluid, free from motion blur. It does this by doubling the traditional progressive scan frame rate and creates new frames of video between the traditional frames to create smoother moving images. Smooth120Hz™ Film Motion also smooths film judder (image vibration) that may be present in filmbased content such as movies.
16:9 Widescreen Picture Format
Enjoy a full theatrical experience in the comfort of your home. View pictures as film directors intended them. Digital TV broadcasts, DVDs and newer video game consoles support this widescreen format.
Integrated HDTV Tuner
Your widescreen Mitsubishi HDTV has an internal HDTV tuner able to receive both over-the-air HDTV broadcasts (received via an antenna) and non-scrambled digital cable broadcasts, including non-scrambled HDTV cable programming.
High-Definition Video Inputs
•Component Video Inputs. Also called Y/Pb/Pr inputs, these inputs receive standard analog video formats of 480i, 480p, 720p, and 1080i high-defini- tion signals. This provides a high level of flexibility when connecting DVD players/recorders, cable boxes, and satellite receivers.
•HDMI Inputs. These inputs accept digital 480i, 480p, 720p, 1080i, and 1080p video signals plus bitstream and PCM digital stereo signals. The HDMI™ inputs can also accept a variety of PC signals and resolutions. These inputs support HDMI 1.3 Deep Color (up to 36 bits) and the x.v.Color extended color gamut.
Used with an adapter, these inputs also accept compatible digital DVI video signals. HDMI inputs provide additional high-performance, high-definition connections for maximum flexibility
in your choice of home theater products. The HDMI inputs are HDCP copy-protection compatible.
Easy Connect Auto Input Sensing
Easy Connect™ Auto Input Sensing automatically recognizes when you plug in a device and prompts you to assign a name to it. The TV ignores any unused inputs, so the result is an uncluttered menu where you can easily find and select connected devices by name.
Home-Theater Control
HDMI Control
Available for all models. HDMI devices with Consumer Electronics Control (CEC) capabilities may be compatible with the TV’s HDMI Control feature. Compatible devices can receive control signals through the HDMI connection, allowing the TV’s remote control to operate some functions of these devices.
NetCommand with IR Learning
153 Series. Your Mitsubishi HDTV offers a new level of networking that seamlessly integrates selected older A/V products with new and future digital products. NetCommand® supports IR (infrared) control of products such as VCRs, DVD players, cable boxes, and satellite receivers. NetCommand can “learn” remote control signals directly from many devices, allowing you to create a customized NetCommand-controlled hometheater system.
Sound Projector
Sound Projector technology uses the TV’s bank of speakers to create a simulated surround sound effect by reflecting sound off the room walls. Sound Projector lets you customize the effect to match your room dimensions and layout.
ENERGY STAR® Compliance
This TV meets ENERGY STAR® efficiency standards under all but the following conditions:
TV Condition |
TV Power Status |
|
|
|
|
Picture Mode set to |
While powered on, the |
|
Brilliant |
TV’s power consumption |
|
|
exceeds ENERGY STAR |
|
|
standards. |
|
Fast Power On |
While powered off, a few |
|
enabled |
components draw power |
|
|
at a level that exceeds |
|
153 Series. External |
||
ENERGY STAR standards |
||
Controller Input enabled |
||
for a powered-off device. |
||
|
|
7 |
Please take a moment to review the following list of accessory items to ensure that you have received everything.
1. |
Remote Control |
|
|
|
ACTIVITY |
2. |
Two AA Batteries |
AA |
|
|
AA |
3.Basic Owner’s Guide
4.HDTV Quick Setup Guide
5.Product Registration Card
6.Power Cord
7.Cable Tie
8.Stand Screws
9.153 Series. Calibration Microphone
Remote Control Batteries
1. Remove the remote control back cover.
Emitter
Bulb
2.Load the batteries, making sure the polarities
(+) and (-) are correct. Insert the negative (-) end first.
3. Slide the cover back into place.
8 |
1. Basic Setup and Operation |
CAUTION: Using this TV with other than the authorized accessories may cause the TV to become unstable, which can cause damage to the product or possible injury.
Required: Phillips Screwdriver
1
2
3
Extension pieces on back of stand
Back
CAUTION
At least TWO PEOPLE are required to install the stand. Support the TV near the corners as shown. Failure to follow these recommendations may result in personal injury and damage to the product.
If planning to wall-mount the TV, do not install the stand. To order a wall-mount kit, please contact Peerless Industries, Inc. at (800) 473-3753 or visit www.peerlessmounts.com. Order wall-mount kit model ST650.
To order a wall-mount kit from Mitsubishi Digital Electronics America, Inc., please visit www.mitsuparts.com or call (800) 553-7278.
Complete installation instructions are included with the kit.
1. Basic Setup and Operation |
9 |
1.Review the important safety, installation, and operating information at the beginning of this book.
2.Choose a location for your TV.
•See the stand-installation or wall-mounting requirements on the opposite page.
•Allow at least four inches of space on all sides of the TV to help prevent overheating. Overheating may cause premature failure of the TV.
•Avoid locations where light may reflect off the screen.
3.Install the batteries in the remote control.
4.Plug the TV into an AC power outlet.
1.Confirm that the remote control is in TV mode.
•Press the side button once to light the mode indicator and confirm that TV mode is active.
•To change, press the side button additional times to activate TV mode.
2.Aim the remote control
at the TV and press the POWER key . Wait for the
Welcome screen.
TV
GUIDE MENU INFO BACK
GUIDE MENU INFO BACK
|
3. |
Press |
if you wish to |
|
|
change the menu language |
|
|
|
to Español. |
|
|
4. |
Press |
to move to the |
|
|
energy-mode selections. |
|
|
|
See the information box for |
|
|
|
details. |
|
TV power connection |
5. |
Press |
to highlight EXIT. |
|
Press |
ENTER to clear the |
|
|
|
menu.
Welcome Screen Energy Options
• Mitsubishi recommends the Home setting, which meets ENERGY STAR® efficiency standards.
• Home Fast Power On allows the TV to power up quickly. With this setting the small current the TV draws while powered off exceeds ENERGY STAR standards for a powered-down device.
• The Retail setting looks best under bright lighting. This mode increases the TV’s power consumption beyond ENERGY STAR standards.
This table compares Welcome screen energy modes.
|
|
Home Fast |
|
|
Home |
Power On |
Retail |
|
|
|
|
Picture Mode |
Bright |
Bright |
Brilliant |
|
|
|
|
Backlight |
Reduced |
Reduced |
Full |
Level |
Brightness |
Brightness |
Brightness |
|
|
|
|
Time to |
Normal |
Fast |
Normal |
Power On |
|
|
|
|
|
|
|
10 |
1. Basic Setup and Operation |
Remote Control
ACTIVITY Press to select a TV activity and input. See page 24.
GUIDE ChannelView listings, page 25.
MENU TV main menu, page 37
INFO TV status (page 26) or TV help.
BACK Steps back one menu; clears the top menu or Status Display.
ACTIVITY
GUIDE MENU INFO BACK
VCR CABL/SAT TV DVD AUDIO
Control-mode indicator for device type to control. Use the side button to change.
Powers TV on or off.
Side button sets the control mode for the type of device to operate. Set mode to TV for normal TV viewing.
Volume Up |
CHANNEL UP |
MUTE LAST. Returns to the previously tuned channel.
VOLUME DOWN |
CHANNEL DOWN |
Record/Playback controls for external devices |
|
PAGE UP |
|
|
Selects a channel number or |
||
When remote control is programmed, page 67 |
ENTER |
||
menu item. |
|||
HDMI control, page 76 |
|
||
|
|
||
153 Series: NetCommand, page 55 |
|
Navigation controls |
|
(Pause) Freezes a broadcast TV picture. |
|
PAGE DOWN |
|
|
|
|
|
MORE |
Displays a menu showing addi- |
|
|
|
tional functions for the number |
|
Number/letter keys |
|
keys. |
|
• For the MORE menu in TV mode, |
||
|
Channel tuning, page 14 |
||
|
|
see below. |
|
|
|
• With remote control programmed |
|
— |
Adds a separator when enter- |
for other device types, page 67. |
|
The MORE menu in other modes is |
|||
CANCEL |
ing digital channel numbers. |
specific to the device type. |
|
|
Clears some menu entries. |
• For CEC-enabled devices, page 74 |
The MORE menu in TV mode
Note: To operate other audio/video devices using the TV’s remote control:
•See Appendix B, “Programming the Remote Control.”
•For HDMI devices compatible with the TV’s HDMI Control feature, see Appendix C.
•153 Series
-- See page 52 for NetCommand IR “Learning” of device keys.
-- For use of specific keys with NetCom- mand-controlled devices, see “Special Operation Methods,” page 55.
CC Closed Captions, page 43
VIDEO Video adjustments, page 38
AUDIO Audio adjustments, page 39
SLEEP Sleep Timer, page 24
FORMAT Picture shape (aspect ratio), page 27
MORE Clears the MORE menu.
1. Basic Setup and Operation |
|
11 |
TV Controls, continued
TV Control Panel
Buttons on the control panel duplicate some keys on the remote control.
•ACTIVITY, CH, and VOL are available when no TV menus are displayed.
• and ENTER are available when using TV menus or after activating a special function.
System Reset
If the TV fails to respond to the remote control, the control-panel buttons, or will not power on/off, perform System Reset. Recent setting changes made before using System Reset may be lost.
To perform System Reset, press and hold the POWER button on the control panel for ten seconds.
Panel-Lock Release
•To release the Panel Lock using the TV control panel, press and hold the ACTIVITY button on the control panel for ten seconds. If the TV is off, press the POWER button to have it power on.
•To activate the Panel Lock, use the Lock menu, page 51.
The TV control panel is located on the side.
IR Sensor
The TV’s IR (infrared) sensor receives signals from the remote control. Do not cover the sensor.
POWER Indicator
POWER
Key
Off
Steady On
Slow Blinking
LED Color |
TV Condition |
Additional Information |
|
|
|
|
|
|
|
None |
TV is powered off. |
Normal operation. |
||
|
|
|
|
|
Green |
TV is powered on. |
Normal operation. |
||
|
|
|
|
|
Green |
TV powered off, auto-on TV Timer |
Normal operation. TV can be turned on at any time. |
||
is set. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Red |
TV may require service. |
Turn off the TV and unplug the set from the AC power source. |
||
|
Wait one minute and then plug the set back in. See Appendix E. |
|||
|
|
|||
|
|
If the red LED is still on, contact your dealer or a Mitsubishi |
||
|
|
Authorized Service Center. Go to www.mitsubishi-tv.com or call |
||
|
|
1-800-332-2119 to receive Authorized Service Center information. |
||
|
|
|
|
|
12 |
1. Basic Setup and Operation |
Channel Scan for Digital Channels
If you skip this step, the TV cannot receive digital channels.
If using an antenna or direct cable service (no cable box), connect the incoming coaxial cable to the TV’s ANT input. Refer to page 20.
You must perform a channel scan to enable reception of all available high-definition and standard-definition digital channels. The channel scan will search for channels available locally and save them to memory.
Memorizing Channels with Channel Scan For the ANT input
To start channel memorization
1.Power on the TV.
2.Press MENU and open the Initial > Channel menu.
Start channel memorization from the Initial > Channel menu.
3.Press ENTER to enter the menu.
4.Select Ant Air if connected to an over-the-air antenna. Select Ant Cable for direct cable (service without a cable box).
5.Highlight Scan and press ENTER. Channel memorization may take up to 15 minutes to complete.
To stop channel memorization before completion, press CANCEL.
Use the Initial > Channel > Edit menu (page 45) for additional channel options, such as adding or deleting channels from memory.
Setting Up Other Inputs
1.Connect your devices to the TV, making note of which TV input jack is used for each device. See “TV Connections,” page 16, for recommendations.
2.Power on the devices to ensure detection.
3.Power on the TV.
The TV will display the New Device Found screen for each new connection it detects Learn more about Auto Input/Auto Output Sensing on the opposite page.
4.Select the device type if the device is not recognized automatically.
Sample New Device
Found screen.
5.153 Series. You can perform NetCommand IR “learning” after selecting the device type or at a later time when convenient. To perform now, highlight NetCommand and press ENTER. See “Initial NetCommand Setup,” page 54 or “Setting Up A/V Receiver Control,” page 59.
Important Note for NetCommand IR Users
153 Series. Be sure to select the correct device type here. Although you can change the device type later in the Inputs > Name menu, any “learned” NetCommand IR codes will be erased when you make the change.
6.Press BACK to close the New Device Found screen. The TV will then display the New Device Found screen for the next connection it finds.
1. Basic Setup and Operation |
13 |
Setting Up TV Inputs, continued
About Auto Input Sensing/ Auto Output Sensing
This TV’s Easy Connect™ Auto Sensing feature detects most connections automatically.
Auto Sensing for Most Devices
When you first connect a device, the TV will:
a.Detect the connected device and automatically switch to it.
b.Prompt you to identify the device type.
c.153 Series. Prompt you to perform NetCommand set-up for the device, if available.
d.Repeat these steps for any other newly detected devices.
Which Jacks Trigger Auto Sensing?
TV Jacks and |
Auto Sensing |
AutoNo Sensing |
|
|
|
Auto Sensing |
|
|
|
|
|
Y/VIDEO (detected as composite video) |
|
|
Y/VIDEO plus Pb (detected as |
|
|
component video) |
|
|
|
|
|
|
|
|
HDMI |
|
|
USB |
|
|
Digital Audio OUTPUT (orange jack) |
|
|
AVR AUDIO OUTPUT (red jack) |
|
|
SUBWOOFER OUTPUT (black jack) |
|
|
Digital Audio INPUT (orange jack) |
|
|
ANT (Antenna) |
|
|
IR NetCommand Output/External Con- |
|
|
troller Input (153 series) |
|
|
The TV may not detect an HDMI device when the device is powered off. Detection of the device will occur the next time it is powered on.
When You First Connect a Device
•Most Device Types. Select the device type from the on-screen list. The device type you select here will appear as a device icon in the Activity menu.
•A/V Receiver
-- The TV detects audio connections on the DIGITAL AUDIO OUTPUT jack and the right (red) AVR AUDIO OUTPUT jack.
-- For an HDMI A/V receiver, select AVR from the list of device types if the A/V receiver is not recognized automatically.
•HDMI CEC Devices Compatible with the TV’s HDMI Control Feature. Compatible CECenabled HDMI devices are often recognized automatically by the TV. HDMI Control may allow you
to control some functions of a CEC-enabled device. See Appendix C, “HDMI Control of CEC Devices.”
New Device Found screen for a device with HDMI control enabled. Select On to enable the TV’s CEC
control of the device. In some cases, as in the example above,
you will also be prompted to select a device name.
Tips on Auto Sensing
•Choose a different name for each input.
•The antenna input (ANT) is never detected, although you can turn off the unused antenna input in the Inputs > Name menu.
•Change the device type displayed in the Activity menu in the Inputs > Name menu (page 47). You must switch to a different input before changing the device type.
•153 Series. Any “learned” NetCommand IR codes will be erased if you change the device type in the
Inputs > Name menu.
Reactivating Auto Sensing for an HDMI Input
When you disconnect an HDMI device, Auto Sensing is disabled until you perform these steps.
1.Switch to any input other than the one to be disconnected.
2.Disconnect the HDMI device.
3.Delete the removed HDMI device in the Inputs > Name menu (see “Removing an HDMI Device,” page 76).
4.Connect the new HDMI device and the New Device Found screen will display.
14 |
1. Basic Setup and Operation |
Watching Broadcast TV
TV Connected to an Antenna, Direct Cable Service, Cable Box, Set-Top Box, or Satellite Receiver
1.Press ACTIVITY.
2.Press and to select a broadcast source. If you named devices during Auto Input Sensing, select an input from the Watch TV group.
Note: For more about the Activity menu, see page 24.
Activity menu, antenna input selected
3.Press ENTER to switch to the input.
4.Tune to a channel on the ANT input using any of these methods.
•Enter the channel number using the number keys on the remote control and press ENTER.
For a two-part digital channel, such as 3-1, |
||
press 3 |
— |
1 to enter a dash (separator). |
CANCEL |
•Press CHANNEL UP/CHANNEL DN (+, –) to change channels one channel at a time.
•Press (LAST) to switch back to the previously tuned channel.
•Antenna or Direct Cable Only. Press GUIDE to display ChannelView channel listings, highlight a channel number, and press ENTER to tune.
Watching DVDs or Videos
TV Connected to a DVD Player, DVR, or VCR
1.Press ACTIVITY.
2. Press and to select a movie source. If you named devices during Auto Input Sensing, select an input from the Watch Movie group.
Activity menu, DVD input selected
3. Press ENTER to switch to the input.
1. Basic Setup and Operation |
15 |
Basic TV Operation, continued
Making Picture Adjustments
To get the best picture under different viewing conditions, set the Picture Mode before changing other video settings. Picture adjustments are described on pages 38, 41, and 42.
1.Press MORE.
2.Press 8 (VIDEO).
3.Press to display the Picture Mode adjustment.
4.Press to select a Picture Mode using these guidelines:.
Name |
|
When to Use |
Brilliant |
|
Under bright light |
|
||
Game |
|
With gaming consoles |
Bright |
|
For most daytime viewing |
Natural |
|
For most nighttime viewing |
5.Press to display the name of the next adjustment you want.
6.Press to make the adjustment.
7.Press BACK to clear or just wait for the display to clear after a few seconds of inactivity.
Additional picture adjustments are described on pages 41 and 42.
Other TV Features
•To set the TV Clock see page 44. Set the TV Clock if you plan to use the TV Timer (page 44) or ChannelView (page 25) features.
•To set parental controls, see the Lock menu, page 49.
•To change the input names that appear in the Activity menu, see Inputs > Name options, page 47.
•To program the remote control to operate other A/V devices, see Appendix B, “Programming the Remote Control,” page 67.
•To activate Audio Lock to control an external sound system with the TV’s remote control left in TV mode. See page 68.
•To control compatible devices using HDMI CEC control, see Appendix C, “HDMI Control of CEC Devices,” page 74.
•To view still and moving digital camera images on the TV, see “Camera Images and Music Files,” page 30.
•153 Series. To control A/V devices with NetCommand, see chapter 5, “NetCommand IR Control for Most Devices” on (page 52).
Audio Settings
Changing Audio Settings
1.Press MORE.
2.Press 9 (AUDIO).
3.Press to display the name of the adjustment you want.
4.Press to change the setting.
Changing the Audio Output
To switch audio output from the internal TV speakers to a connected external sound system or headphones:
1.Press MORE.
2.Press 9 (AUDIO).
3.Press until the Speakers option is displayed. The Speakers option will display only if a connection has been detected on one of the TV’s audio outputs.
4.Press to switch between TV and either AV Receiver or Headphones.
Other Information
•General Cleaning. See “Cleaning Recommendations,” page 77.
•Troubleshooting, Service, and Product Support.
See Appendix E, page 78.
•Warranty Information. See the TV warranty on page 89.
Auto Input/Auto Output Sensing
The TV’s Auto Sensing feature automatically recognizes most connections and prompts you to identify the type of device connected. See page 13 for more on Auto Sensing.
Connection Types
Use the connection types available on your input devices that will give the best video quality. For example, choose HDMI over component video, and choose component video over composite video.
Picture Quality
For best picture quality, route signals directly from the input device to the TV whenever possible.
Surround Sound
For best surround sound audio quality, route audio or HDMI cables from the source device directly to your TV (for Sound Projector) or directly to your A/V receiver if using an external sound system.
IMPORTANT
Accessory items such as cables, adapters, splitters, or combiners required for TV connections are not supplied with the TV. These items are available at most electronics stores.
Install the cable tie (supplied) in one of the four mounting holes on the back.
Lock the cable tie in place by pushing the end into the mounting hole.
1
2
To remove the cable tie, squeeze the side tabs and pull out.
Sample cable routing. Secure cable bundle with the
release tab facing out.
Press the release tab to loosen the cable tie.
2. TV Connections |
17 |
Connector Panels |
|
|
|
|
DIGITAL AUDIO |
|
|
|
AVR Audio |
6 |
INPUT |
|
|
HDMI |
OUTPUT |
(page 19) |
|
|
|
(pages 19, 22) |
(page 22) |
|
SUBWOOFER |
IR–NetCommand Output/ |
10 |
|
7 OUTPUT |
||
2 |
5 |
|
|||
External Controller Input |
|
|
(page 23) |
||
|
|
|
|
||
153 series |
|
|
|
|
DIGITAL |
NetCommand, page 53 |
|
|
|
|
|
External Controller Input, |
|
|
|
|
Audio |
page 18 |
|
|
|
|
OUTPUT |
|
|
|
|
|
(page 22) |
|
|
|
|
|
8 |
|
|
|
AVR AUDIO OUTPUT |
|
|
|
|
R |
L |
|
|
|
|
9 |
|
3 |
4 |
DVI/PC AUDIO |
|
Y Pb Pr |
VIDEO |
||
INPUT |
|||
(component |
(composite video, |
(page 20) |
|
video, page 19) |
page 21) |
|
|
|
VIDEO |
|
|
(composite video, |
|
|
|
|
page 21) |
|
|
Y Pb Pr |
4 |
|
HDMI |
(component video, |
ANT |
|
(page 19) |
page 19) |
|
(page 20) |
2 |
3 |
|
1 |
Y Pb Pr
(component video, page 19)
3
4
VIDEO
(composite video,
page 21; with an audioonly device, page 23)
Calibration Microphone Input 153 series
(page 35)
11USB
(page 30)
18 |
2. TV Connections |
Inputs and Outputs, continued
1. ANT (Antenna)
Connect your main antenna or direct cable service (no cable box) to ANT. The ANT input can receive digital and analog over-the-air channels from a VHF/UHF antenna or non-scrambled digital/analog cable source.
2. HDMI™ Inputs (High-Definition Multimedia Interface)
The HDMI inputs support uncompressed standard and high-definition digital video formats, PCM digital stereo audio, and digital 5.1 surround sound. These inputs are HDCP (High-Bandwidth Digital Copy Protection) compliant.
Mitsubishi recommends you use category 2 HDMI cables, also called high-speed HDMI cables, to connect HDMI 1.3 source devices. High-speed category 2 cables bring you the full benefits of Deep Color and x.v.Color.
The TV’s HDMI inputs are compatible with many DVI-D and HDMI computer video signals.
Use the HDMI inputs to connect to CEA-861 HDMI compliant devices such as a high-definition receiver or DVD player. These inputs support 480i, 480p, 720p, 1080i, and 1080p video formats.
These HDMI inputs can also accept digital DVI video signals. To connect a device’s DVI output to the TV’s HDMI input, use an HDMI-to-DVI adapter or cable plus analog audio cables. Connect the analog audio cables to the DVI/PC INPUT AUDIO jacks on the TV to receive left and right stereo audio from your DVI device.
3. Y Pb Pr (Component Video)
Connect devices with component video outputs to this jack. Use the adjacent AUDIO R and L jacks if you wish to send audio to the TV.
HDMI Cable Categories
HDMI cables are available as Category 1 and Category 2 types.
•Category 2 Cables (also called high-speed HDMI cables). Newer, HDMI 1.3-compliant DVD players, video games, and set-top boxes require Category 2 cables, suitable for clock frequencies up to 340 MHz or data rates of up to 10.2 gigabits per second. Use category 2 cables for high-speed 1080p HD signals carrying extended color encodings (i.e., 30 or more bits, also called Deep Color). Category 2 cables are also suitable for standard HDTV signals.
•Category 1 Cables (also called standard HDMI cables). Category 1 cables may be unmarked. They are suitable for standard HDTV 720p, 1080i, and 1080p signals with 8-bit color depth. Use category 1 cables for clock frequencies up to 74.25 MHz or data rates of up to 2.23 gigabits per second.
4. Video (Composite Video)
Connect a VCR, DVD player, standard satellite receiver, or other A/V device to the TV. Use the adjacent AUDIO R and L inputs if you wish to send audio to the TV.
5. AVR AUDIO OUTPUT
Use AVR AUDIO OUTPUT to send analog audio of the current program to an analog A/V surround sound receiver or stereo system. Digital audio from digital channels and HDMI devices is converted to analog audio by the TV for output on this jack. This is the only audio connection needed to the TV if using an analog A/V receiver or stereo system.
Headphones. These jacks can also be used for headphones that accept standard line level audio signals. An adapter may be needed.
6. DIGITAL AUDIO INPUT
This input sends digital surround sound to the TV’s speaker array from a device, such as a DVD player, connected to INPUT 2.
7. SUBWOOFER OUTPUT
Connect a powered subwoofer to complement Sound Projector speaker effects.
8. DIGITAL AUDIO OUTPUT
This output sends Dolby Digital or PCM digital audio to your digital A/V surround sound receiver. Incoming
analog audio is converted by the TV to PCM digital audio. If you have a digital A/V receiver, in most cases this is the only audio connection needed between the TV and your A/V receiver.
9. DVI/PC AUDIO INPUT
When connecting a DVI device to one of the TV’s HDMI inputs, use these jacks to send left and right analog audio to the TV.
10. IR–NetCommand Output/External Controller Input
153 Series. Use an IR emitter cable with this jack to send control signals to external IR remote-controlled devices. Alternatively, your professional installer can use this jack as the input for an external controller.
Connect to this jack and when the New Device Found screen appears, select operation of the jack as either an input (for an external controller) or as an output (for NetCommand IR control). See page 53.
11. USB
The TV can read JPEG photo files and mp3 or wma music files from a USB device connected to the USB port.
2. TV Connections |
19 |
HDTV Cable Box, Satellite Receiver, DVD/
Blu-ray Player
Suitable for use with Sound Projector surround sound
If your source device has an HDMI output, use the connections for HDMI devices described on this page instead of component video.
Required:
1.RCA-type component video cables
2.Audio cable(s)
2a. Digital audio cable or
2b. Left/right analog stereo audio cables.
Note:
•To hear digital surround sound from the TV’s Sound Projector speaker array, connect the digital audio output from the device to the TV’s DIGITAL AUDIO INPUT jack.
•To hear digital surround sound from an external sound system, connect the digital audio output from the device directly to your digital A/V receiver.
HDTV Cable Box, Satellite Receiver, DVD/ Blu-ray Player
Suitable for use with Sound Projector surround sound
Required: HDMI-to-HDMI cable.
Connect an HDMI cable from the TV back panel to the HDMI device output. HDMI devices provide video and audio through the single cable. This connection sends digital surround sound from the source device to the TV’s speaker array.
Mitsubishi recommends you use category 2 (highspeed) HDMI cables to connect HDMI 1.3 source devices. High-speed category 2 cables bring you the full benefits of Deep Color and x.v.Color. See “HDMI Cable Categories” on the opposite page for more on HDMI cable types.
AUDIO OUTPUT
L
|
HDMI-to-HDMI |
TV |
|
|
|
AVR AUDIO |
cable |
|
R L |
|
|
TV |
|
Any device with |
|
|
HDMI output |
|
or |
2a. |
1. |
2b. |
|
|
|
Incoming from cable service or satellite dish
Pb |
R |
L |
DIGITAL |
VIDEO OUT |
AUDIO OUT |
AUDIO OUT |
CABLE IN or |
Any device with |
SATELLITE IN |
component video |
|
output |
20 |
2. TV Connections |
Cable Box, Satellite Receiver, DVD Player
Connect DVI devices (digital only) to the TV’s HDMI input jacks.
Required:
1.DVI-to-HDMI cable or DVI/HDMI adapter and HDMI cable
2.Left/right analog audio cables.
Some devices require connection to an analog input first in order to view on-screen menus and to select DVI as the ouput. Please review your equipment instructions for DVI connectivity and compatibility.
Note: The HDMI connection supports copy protection (HDCP).
AVR AUDIO OUTPUT
R L
1. |
TV |
|
|
ANALOG R |
DVI OUT |
AUDIO OUT |
L |
2. |
|
Any device with DVI output
VCR or other device with composite video output
Required:
1.Composite video cable (usually yellow)
2.Analog stereo audio cables.
Connect the incoming cable to the TV’s ANT input.
VHF antenna
UHF antenna
300-ohm-to75- ohm combiner (side view)
or
or
TV
Older cable box
|
Cable TV |
|
service |
|
Direct cable (no cable box) |
OUT |
IN |
Not recommeded. Other connection types provide better quality audio and video.
AVR AUDIO OUTPUT
R L
|
TV |
|
|
|
1. |
VCR or |
COMPOSITE |
|
other |
VIDEO OUT |
|
device with |
|
|
composite |
AUDIO R |
2. |
video |
|
|
output |
OUT |
|
|
L |
|
2. TV Connections |
21 |
|
VCR or DVD Recorder to an |
|
VCR or DVD Recorder to a Cable Box |
|||
|
Antenna or Wall Outlet Cable |
|
Required: |
|||
|
|
|
. |
Video cables |
||
|
Required: |
|
|
1a. Component video cables (red/blue/green) |
||
1. |
Video cables |
|
|
or |
||
|
|
1a. Component video cables (red/blue/green) |
|
|
1b. Composite video cable (usually yellow) |
|
|
|
or |
2. |
Left/right analog audio cables. |
||
|
|
1b. Composite video cable (usually yellow) |
3. |
Two-way RF splitter |
||
2. Left/right analog audio cables. |
||||||
4. |
Three coaxial cables |
|||||
3. |
Two-way RF splitter |
|||||
|
5. Video and audio cables required to connect the TV |
|||||
4. |
Two coaxial cables |
|
||||
|
|
to the cable box. |
||||
|
Note: |
|
Notes: Use composite video if only if component video |
|||
• Use composite video only if component video or |
|
|
or HDMI are unavailable. For an HDMI connec- |
|||
|
|
HDMI are unavailable. For an HDMI connection |
|
|
tion between the TV and recorder, see page 19. |
|
|
|
between the TV and recorder, see page 19. |
|
|
When using this connection configuration, it is |
|
• If your recording device has an analog-only tuner, |
|
|
||||
|
|
possible to view live cable programs through the |
||||
|
|
you must use a digital converter box to enable |
|
|
recording device. For best picture quality always |
|
|
|
recording of digital broadcasts. |
|
|
view live cable programs directly from the TV input |
connected to the cable box device.
TV |
TV |
|
|
|
|
|
|
|
|
|
|
|
|
|
5. |
|
|
|
|
|
|
|
|
|
|
|
|
|
Audio and |
|
|
|
|
|
|
|
|
|
|
|
|
|
video from |
|
|
|
|
|
|
|
|
|
|
|
|
|
cable box |
|
|
|
|
|
|
|
|
|
|
|
|
|
directly to TV |
|
1b. |
or |
1a. |
|
2. |
|
|
1b. |
or |
1a. |
2. |
|
OUT |
IN |
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
Cable |
|
|
|
|
|
|
|
|
|
|
|
|
|
Box |
|
|
|
|
|
|
|
|
|
|
|
|
|
4. |
|
COMPOSITE |
|
COMPONENT |
R |
L |
ANTENNA |
|
|
|
|
|
|
|
|
|
|
VIDEO OUT |
AUDIO OUT |
IN |
|
COMPOSITE |
|
COMPONENT |
R |
L |
ANTENNA |
|
|
|
|
|
|
|
|
|
|
|
VIDEO OUT |
AUDIO OUT |
IN |
|
|
DVD Recorder or VCR |
|
|
|
DVD Recorder or VCR |
|
|
|
|
|||||
|
|
|
|
3. |
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
3. |
|
|
|
|
|
|
|
|
RF Splitter |
|
|
|
|
|
|
|
|
||
Incoming cable |
4. |
|
Incoming |
RF Splitter |
|
|
4. |
|
|||||
|
|
|
|
|
|
||||||||
|
|
|
|
cable |
|
|
|
|
|
||||
|
|
|
4. |
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
4. |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
22 |
2. TV Connections |
Most setups require either a digital audio cable or analog stereo audio cables. To send audio from TV channels received on the ANT input or devices connected directly to the TV, you must use one of the connections shown below. Usually, only one of these connections is required.
The TV makes all audio available in digital and analog formats:
•Analog audio coming into the TV is available as output in digital stereo format on the DIGITAL AUDIO OUTPUT jack.
•Digital incoming audio is available as analog output on the AVR AUDIO OUTPUT L and R jacks.
AVR AUDIO
TV
Stereo analog cables (for an analog A/V receiver)
or
Digital coaxial cable (for a digita A/V receiver)
COAXIAL
INPUT
A/V receiver back panel
Note:
•On rare occasions, an HDMI signal may be copy-restricted and cannot be output from the TV as a digital signal. To hear these copyprotected signals through the A/V receiver, use the connection for an analog A/V receiver.
•Check the A/V receiver’s Owner’s Guide for information concerning use of the digital input and switching between digital sound and analog stereo sound from the TV.
Required: One HDMI-to-HDMI cable
This option allows you to view content from devices connected to an A/V receiver over a single HDMI cable going to the TV. The HDMI cable can transmit both audio and video to the TV.
You can use an HDMI connection as described here in addition to an audio connection from the TV’s audio output. The optional audio connection allows you to hear, through the A/V receiver, devices connected to the TV only, e.g., an antenna on the ANT input.
You may be able to use the TV’s remote control (in TV mode) to operate connected CEC-enabled HDMI
devices. Experiment with your equipment to determine which functions are available to the TV’s remote control. See Appendix C, page 74.
153 Series: This setup allows you to use NetCom- mand-controlled audio and video switching over the HDMI cable. See “Case 3: Automatic Audio and Video Switching via HDMI” on page 62.
To use NetCommand to supplement HDMI control of a CEC-enabled A/V receiver, note the recommendations under “More About Using an HDMI Connection,” page 62.
AUDIO OUTPUT
L
TV
Optional HDMI cable analog or
digital audio connection
A/V receiver with |
HDMI OUT |
L R |
DIGITAL |
|
|
ANALOG AUDIO IN |
AUDIO IN |
||
HDMI output |
|
|||
|
|
|
||
Any connection |
|
|
VCR |
|
types |
High-definition |
|
|
|
|
|
|
||
|
DVD player |
|
DVD player |
|
|
|
|
|
|
|
|
|
Cable box |
|
2. TV Connections |
23 |
Subwoofer |
Audio-Only Device |
|
Keep an unused RCA-style con- |
|
nector in the Y/VIDEO jack while |
|
using an audio-only device such |
|
as an MP3 or CD player. |
|
AVR AUDIO OUTPUT |
R |
L |
|
Unused |
|
RCA-style plug |
|
(plug in first) |
TV |
Audio-only |
|
|
|
device |
Subwoofer |
Y
VIDEO R
L
The Activity menu lets you switch TV inputs. If you named devices during Auto Input Sensing, the inputs are organized into groups based on possible ways to use each device.
1. |
Press the Activity key. |
|
2. |
Use |
to move through groups of TV inputs. |
3. |
Use |
to select an input. |
4. |
Press ENTER to switch to the input. |
•To change the list of inputs shown in each activity group, see Inputs > Activity, page 47.
•To assign or change the names of input icons, use the Inputs > Name menu, page 47.
The Sleep Timer turns the TV off after the length of time you set.
To set the TV to turn on at a certain time of day, see the
Initial > Timer menu on page 44.
Setting the Sleep Timer
1.Press MORE on the remote control. The TV’s MORE menu will display.
2.Press CANCEL (SLEEP) repeatedly to increase the time in 30-minute increments. The maximum is 120 minutes.
3.Press BACK or wait five seconds without pressing any keys for the message to disappear.
Viewing or Changing the Sleep Timer
1.Press MORE.
2.Press CANCEL (SLEEP).
3.Press CANCEL (SLEEP) additional times to change the number of minutes before the TV powers off.
SLEEP
With the MORE menu displayed, press the CANCEL key on the remote control to activate or deactivate the Sleep feature.
3. Using TV Features |
25 |
ChannelView. Programs for the tuned channel are listed on right side of screen.
ChannelView™ shows memorized channels on the ANT input. It displays channel names and program information for digital channels as sent by broadcasters or your local cable service provider (information may be incomplete). No program information is displayed for analog channels.
Note: You must set the TV Clock (page 44) to receive ChannelView listings for the current channel.
Using ChannelView
Feature |
Instructions |
|
|
|
|
|
|
Receive updates for a |
1. |
Press |
to |
digital channel. |
|
highlight a channel |
|
|
|
number. |
|
|
2. |
Press the INFO key |
|
|
|
(the screen may |
|
|
|
briefly go blank). |
|
|
|
|
|
Display/hide ChannelView |
GUIDE |
|
|
listings from the ANT |
|
|
|
input. |
|
|
|
Scan channels one by one. |
Hold or . |
|
|
|
|
||
Scan channels quickly. |
Hold PAGE UP/PAGE DN |
||
|
|
|
|
Jump to listings for a spe- |
1. |
Enter the channel |
|
cific channel. |
|
number. |
|
|
2. |
Press ENTER. |
|
|
|
|
|
See more of the program |
INFO |
|
|
description for the current |
|
|
|
channel (if available). |
|
|
|
|
|
|
|
Tune to the highlighted |
ENTER |
|
|
channel. |
|
|
|
|
|
|
|
Selecting an Audio Output Device
1. |
Press MORE and then 9 (AUDIO). |
|
2. |
Press |
to show the Speakers option. The Speak- |
|
ers option will display only if there is a recognized |
|
|
audio device on an audio or HDMI output. |
|
3. |
Press |
to select either AV Receiver, Head- |
phones, or TV.
Adjusting an External Subwoofer
1.Play sample video or music containing low-fre- quency bass sound.
2. Press MORE and then 9 (AUDIO). Use |
to |
display the Subwoofer option. |
|
3.With Subwoofer set to On, press ENTER to display a slider for volume.
4. Press |
to adjust the subwoofer volume. |
Disconnecting an Analog A/V Receiver
When you disconnect an analog A/V receiver, change the Speakers setting to TV to hear sound from the TV speakers. Change the setting using the remote control’s MORE > 9 (AUDIO )key or the Adjust > Audio > Speakers menu.
With a Standard TV Setup
•Recommended Method: Program the TV’s remote control for your A/V receiver and enable the Audio Lock feature. See page 68.
•Program the TV’s remote control for your A/V receiver and set the TV remote control’s mode to AUDIO. Return the control mode to TV to control the TV.
•Use the remote control that came with the A/V receiver.
With HDMI Control (CEC-Enabled HDMI A/V Receiver)
The TV’s remote control may control some functions of the A/V receiver. See Appendix C, “HDMI Control of CEC Devices,” page 74.
With NetCommand IR Control
153 Series. Set up NetCommand control of the A/V receiver’s volume functions in the Inputs > AVR menu. The TV’s remote will then control A/V receiver volume. See page 59.
26 |
3. Using TV Features |
Press the INFO key to see the on-screen status display. The most common displays are shown here.
|
3 |
4 |
|
6 |
1 |
402-101 KABC |
Monday Night Football |
||
|
||||
2 |
TV-PG DLSV |
St. Louis vs. Tampa Bay, played in Tampa for |
||
|
|
|
|
|
|
5 |
|
|
7 |
|
|
|
|
|
8 Sleep 30 min |
|
12 |
13 |
|
|
|
|
Sample information |
|
|
|
|
|
9 |
Tuesday 9:10 PM |
Surround |
English |
||
from the on-screen |
|||||
|
HD 1080i Standard |
|
|
||
status display 10 |
|
|
|||
|
|
|
11
About Channel Numbers
Channel Numbers for Over-the-Air Reception or Reception by Direct Cable
Note: All signals are automatically converted to 1080p for display.
Standard-Definition Analog Channels
Cable Reception |
|
Channel 3 |
Cable |
3 |
480i Stretch
Receiving Standard-Definition
Analog Signal (480i)
Standard-Definition Digital Channels
Over-the-Air |
|
Main Channel 7 |
Antenna Reception |
|
Sub-Channel 1 |
Ant |
7-1 KABC-SD |
SD 4:3 Stretch
Receiving Standard-Definition
Digital Signal (SD)
High-Definition Digital Channels
Over-the-Air |
|
Main Channel 7 |
Antenna Reception |
|
Sub-Channel 1 |
Ant |
7-1 KABC-HD |
HD 16:9 Stretch
Receiving High-Definition
Digital Signal (HD)
14
ACTIVITY
GUIDE MENU INFO BACK
2. Audio Indicator. Key:
TV speakers External sound system
Headphones Mute
3.Channel number (antenna source only)
Digital channel includes major and sub-channel numbers.
4.Digital channel name (if broadcast); antenna source only.
5.V-Chip rating
•Antenna source only for digital signal
•Antenna or VIDEO composite jack for analog signal
6.Program name (if broadcast); digital source only
7.Program description (if broadcast); digital source, antenna only. Press the INFO key additional times to see more of the description.
8.Sleep Timer remaining time
9.Day and time
10.Signal type being received
11.Screen format in use
12.Program Audio indicator (antenna source only)
•Digital source: Stereo, Surround
•Analog source: Stereo, Stereo SAP, SAP
13.Available language (digital source, antenna only)
14.Signal-strength indicator (digital source, antenna only)
3. Using TV Features |
27 |
This is a 16:9 widescreen TV suitable for images available from HDTV and many DVDs. You can view older-style, squarish images (4:3 aspect ratio) using one of the display formats described on this page. Press the MORE key and then the
0 key (FORMAT) to cycle through available display formats. The TV remembers the format you last used for each input.
DVD Image Definitions
Image information may be stated on the DVD case. Some DVDs support both formats described below.
Anamorphic (or Enhanced for WideScreen TV). Indicates DVDs recorded to show widescreen images properly on 16:9 TV sets using the TV’s Standard format mode (recommended).
Non-Anamorphic (or 4:3, 1.33:1, Letter Box, or Full Screen). Indicates DVDs recorded for viewing on squarish TV screens. They may be full screen (4:3 or 1.33:1) which crops movies to fit the narrow TV, or letter box, which adds black top and bottom bars.
Signal Definitions
480i: Older type of interlaced signals from the ANT input, composite VIDEO, component Y Pb Pr, or HDMI jacks.
480p: Progressive-scan DVD signals on component Y Pb Pr or HDMI jacks.
720p and 1080i: High-definition signals received through component Y Pb Pr or HDMI jacks. These signals are always 16:9 (widescreen).
1080p: High-definition signals from a PC or Blu-ray player, HDMI inputs only.
SD 4:3: Standard-definition squarish-screen-format signals from digital channels on the ANT input.
SD 16:9: Standard-definition widescreen-format signals from digital channels on the ANT input.
HD 16:9: High-definition 16:9 widescreen signals from digital channels on the ANT input.
TV Display Format Definitions
Standard: The full-screen format used by HDTV signals. Use this format to display anamorphic DVDs with a 1.78:1 or 1.85:1 aspect ratio. Anamorphic DVDs with a 2.35:1 aspect ratio are displayed correctly but with top and bottom black bars. Squarish (4:3) images are stretched evenly from side to side. Available for all signals.
Expand: Enlarges the picture to fill the screen by cropping the top and bottom; useful for reducing the letter box top and bottom bars of non-anamorphic DVD images.
Zoom: Enlarges the picture to fill the screen by cropping the sides, top, and bottom to eliminate black bars.
•480i/480p and SD 4:3 signals: Eliminates top and bottom bars on anamorphic DVDs with a 2.35:1 aspect ratio.
•720p, 1080i, SD 16:9, and HD signals: Eliminates bars added to squarish 4:3 images.
Original |
|
|
Signal |
|
|
TV |
|
|
Display |
Non-anamorphic or SD 4:3 |
Anamorphic DVD |
Standard |
Distorted. |
Recommended |
|
Not recom- |
|
|
mended. |
|
Expand |
Recom- |
Distorted; not |
|
mended for |
recommended. |
|
letterbox. See |
See Note 1. |
|
Note 1. |
|
Zoom |
Distorted. |
Recommended |
|
Not recom- |
for anamorphic |
|
mended. See |
2.35:1 images. |
|
Note 1. |
See Note 1. |
Stretch |
Recom- |
Distorted; not |
|
mended for |
recommended. |
|
standard |
See Note 1. |
|
broadcasts. |
|
|
See Note 1. |
|
Stretch |
Recom- |
Distorted; not |
Plus |
mended for |
recommended. |
|
standard |
See Note 1. |
|
broadcasts. |
|
|
See Note 1. |
|
Narrow |
See Note 1 |
Distorted; not |
|
|
recommended. |
|
|
See Note 1. |
Note 1: Available for 480i, 480p, and digital SD 4:3 signals only.
Original Signal |
Display Formats |
|
SD 16:9 or |
Wide |
Recommended to re- |
HD Digital |
Expand move side bars. |
|
720p, 1080i, |
|
|
1080p Signal |
Zoom |
Recommended to re- |
|
||
|
|
move bars from the top, |
|
|
bottom, and sides. |
(except 720p |
Full |
Best for computer or |
) |
Native |
game images (compo- |
|
|
nent and HDMI only) |
TV Display Formats. Press MORE and then 0 (FORMAT) to see the displays available for the current program. Press INFO to see the name of the display format in use.
Stretch: Stretches squarish 4:3 images across the screen to display the entire image with less distortion than Standard.
Stretch Plus: Similar to Stretch, but minimizes distortion on the sides by expanding the picture to crop off portions of the top and bottom. Use to adjust the vertical position of the picture.
Narrow: Displays narrow 4:3 images in their original shape. Adds black side bars to fill the screen.
Wide Expand: Enlarges the picture, cropping the image on both sides. Removes or reduces black side bars added to narrow images converted to 16:9 signals for digital broadcast.
Note: All high-definition channels send widescreen (16:9) signals, but not all programming was created for the widescreen format. The broadcaster may stretch the image or add side bars to fill the widescreen area.
Full Native: Displays all pixels in the original image
28 |
3. Using TV Features |
Connecting a Computer to the TV
Use one of the connection methods listed below based on your computer’s video output.
Computer |
Video Connection |
Audio |
|
Video Output |
Connection |
||
|
|||
|
|
|
|
Digital DVI |
DVI-to-HDMI cable |
Stereo audio |
|
|
or an HDMI cable |
cables |
|
|
with an HDMI-to- |
|
|
|
DVI adapter |
|
|
|
|
|
|
|
Note: If the computer’s audio output |
||
|
is a single mini jack, a mini audio-to- |
||
|
RCA-male “Y” adapter cable is also |
||
|
required. |
|
|
|
|
|
|
HDMI |
HDMI-to-HDMI |
No additional |
|
|
cable |
audio connec- |
|
|
|
tion is required. |
|
|
|
|
IMPORTANT
This TV accepts digital computer signals only.
1.Connect the computer’s digital signal output to one of the TV’s HDMI jacks. See the connection diagrams for the method suited to your equipment.
2.Connect the computer’s audio output using one of these options:
•For digital DVI signals, connect analog left/right audio to the TV’s DVI/PC INPUT AUDIO jacks.
•For HDMI signals, no additional audio connection is required.
3.Power on the TV and computer. The TV will detect the connection and display the New Device Found screen.
4.In the New Device Found screen, press to highlight PC in the list of device types. It is important to use the name PC so that the TV processes the video signal correctly.
5.Press BACK to close the New Device Found screen.
AVR AUDIO OUTPUT
R L
TV
Computer with HDMI audio and video output
An HDMI-to-HDMI connection carries all video and audio on a single cable.
TV
AVR AUDIO OUTPUT
R L
HDMI-to- |
Analog audio |
DVI cable |
cables |
DVI OUT |
|
AUDIO |
|
|
OUT |
||
R |
L |
||
|
A DVI connection from a personal computer requires a separate audio connection.
Note: If your computer provides digital audio output (coaxial or optical), you can connect it directly to a digital A/V receiver and bypass the TV.
3. Using TV Features |
29 |
Using the TV with a Personal Computer
Computer Video Adjustments
1.Power on the computer.
2.Select PC from the Activity menu. To do this, press ACTIVITY to open the Activity menu, move the highlight to the PC icon, and press ENTER.
Tip
Set the computer’s screen saver to display a pattern after several minutes of inactivity. This acts as a reminder that the TV is powered on
3.Working from the computer, change the resolution of the computer image. View the computer image on the TV and maximize the computer resolution while maintaining a suitable aspect ratio for the image.
4. Perform TV video adjustments. Press |
Computer Display Formats |
|
||
MORE then press 8 (VIDEO) repeatedly |
|
|
|
|
to access video-adjustment options. |
|
|
|
|
The following additional adjustments |
|
|
|
|
are available for computer video: |
Computer Signal |
As Displayed on TV Screen |
||
Horiz Position (Horizontal Position) |
||||
Original Format |
4 X 3 |
16 X 9 |
||
Manually adjust the horizontal |
||||
Standard |
Standard |
|||
position. |
|
|||
|
|
|
||
Vert Position (Vertical Position). |
VGA |
|
|
|
Manually adjust the vertical position. |
640 X 480 |
|
|
|
5. Press MORE then press 0 (FORMAT) |
WVGA |
|
|
|
repeatedly to find the picture format |
|
|
||
(aspect ratio) best suited to the image. |
848 X 480 |
|
|
|
See the chart on this page showing |
|
|
|
|
how different computer resolutions |
SVGA |
|
|
|
can be displayed on the TV. |
|
|
||
800 X 600 |
|
|
||
|
|
|
||
Distortion in Computer Images |
WSVGA |
|
|
|
Computer images may show distortion |
|
|
|
|
when viewed on the TV, e.g., lines that |
|
|
|
|
should be straight may appear slightly |
Original Format |
Standard |
Zoom |
|
curved. |
||||
|
|
|
||
|
XGA |
|
|
|
Image Resolution |
1024 X 768 |
|
|
|
|
|
|
||
Your Mitsubishi TV can display the resolu- |
PC 720p |
|
|
|
tions shown in the chart from standard |
1280 X |
|
|
|
VGA (640 x 480) through 1920 x 1080 |
|
|
|
|
signals at a refresh rate of 60 Hz. |
WXGA |
|
|
|
|
|
|
||
In most cases, the computer will select |
1360 X 768 |
|
|
|
the best resolution match to display on |
|
|
|
|
the TV. You can override this setting if you |
SXGA |
|
|
|
wish. Refer to your computer operating |
|
|
|
|
system’s instructions for information on |
|
|
|
|
changing the screen resolution. |
|
|
|
|
You may need to restart the computer |
Original Format |
Standard |
|
|
PC 1080p |
|
|
||
changes to take effect. |
|
|
||
|
1920 X 1080 |
|
|