LumaSense Technologies M305 User Manual

M305

Light Weight Blackbody

MANUAL

Confidential Information

The material contained herein consists of information that is the property of LumaSense Technologies and intended solely for use by the purchaser of the equipment described in this manual. All specifications are subject to change without notice. Changes are made periodically to the information in this publication, and these changes will be incorporated in new editions.

LumaSense Technologies prohibits the duplication of any portion of this manual or the use thereof for any purpose other than the operation or maintenance of the equipment described in this manual, without the express written permission of LumaSense Technologies.

Copyright

© LumaSense Technologies 2014. All rights reserved.

Trademarks

Mikron is a trademark of LumaSense Technologies.

All other trademarks are trademarks, registered trademarks, and/or service marks of their respective holders.

	Service Centers
LumaSense Technologies, Inc.	LumaSense Technologies GmbH
North America	Other Than North America
Sales & Service	Sales & Support
Santa Clara, CA, USA	Frankfurt, Germany
Ph: [phone]	Ph: [phone]
Ph: [phone]	Fax: [phone]
Fax: [phone]

Global and Regional Centers

Our Headquarters	Americas, Australia, & Other Asia	Europe, Middle East, Africa
LumaSense Technologies, Inc.	LumaSense Technologies, Inc.	LumaSense Technologies GmbH
Santa Clara, CA, USA	Santa Clara, CA, USA	Frankfurt, Germany
Ph: [phone]	Ph: [phone]	Ph: [phone]
Fax: [phone]	Fax: [phone]	Fax: [phone]

Brazil	India	China
LumaSense, Vendas Brasil	LumaSense Technologies, India	LumaSense Technologies, China
Campinas, Brasil	Mumbai, India	Shanghai, China
Ph: [phone]	Ph: + 91 22 67419203	Ph: [phone]
Fax: [phone]	Fax: + 91 22 67419201	Fax: [phone]

E-mail [e-mail] [e-mail] [e-mail] [e-mail]

Website http://www.lumasenseinc.com

Part No 11180-36 - EN

Revision A

July 2014

Contents

1	General Information......................................................................................................			5
	1.1	Information about the user manual.....................................................................		5
		1.1.1	Legend .................................................................................................................	5
	1.2	Safety	.....................................................................................................................	5
		1.2.1	Safety Notifications/Warnings .............................................................................	5
	1.3	Limit of .............................................................................liability and warranty		5
	1.4	Unpacking ....................................................................................the Instrument		6
	1.5	Service .....................................................................Request, Repair, or Support		6
	1.6	Shipments ....................................................................to LumaSense for Repair		6
	1.7	Transport, ..................................................................................Packing, Storage		7
	1.8	Disposal ................................................................................./ decommissioning		7
2	Introduction...................................................................................................................			9
	2.1	Description.............................................................................................................		9
	2.2	Technical .......................................................................................................Data		9
	2.3	Dimensions ..........................................................................................................		10
3	Installation ..........................................................................................and Operation			11
	3.1	Installation...........................................................................................................		11
	3.2	Operation.............................................................................................................		11
		3.2.1 ........................................................................................................	Starting Up	11
		3.2.2 ......................................................................................	Changing the Setpoint	11
		3.2.3 ..................................................................................................	Shutting Down	12
		3.2.4 .......................................................Temperature Controller Tuning Constants		13
		3.2.5 .............................................................................	Using Serial Communication	13
		3.2.6 .......................................................................................	Controller Calibration	15
		3.2.7 ................................................Switch Comm Mode from Ei Bisync to Modbus		17
Index ..................................................................................................................................				19

M305 Manual

Contents iii

To ensure consistent document formatting, this page was intentionally left blank.

M305 Manual

Contents iv

1 General Information

1.1Information about the user manual

Congratulations on choosing the high quality and highly efficient Mikron blackbody.

This manual provides important information about the instrument and can be used as a work of reference for installing, operating, and maintaining your blackbody. It is important that you carefully read the information contained in this manual and follow all safety procedures before you install or operate the instrument.

To avoid handling errors, keep this manual in a location where it will be readily accessible.

1.1.1Legend

Note: The note symbol indicates tips and useful information in this manual. All notes should be read to effectively operate the instrument.

Warnings and Cautions: The general warnings and cautions symbol signifies the potential for bodily harm or damage to equipment.

1.2Safety

This manual provides important information on safely installing and operating the

M305 blackbody. Several sections of this manual provide safety warnings to avert danger. These safety warnings are specified with a warning symbol. You must read and understand the contents of this manual before operating the instrument even if you have used similar instruments or have already been trained by the manufacturer.

It is also important to continually pay attention to all labels and markings on the instrument and to keep the labels and markings in a permanent readable condition.

Warning: The blackbody is only to be used as described in this manual. It is recommended that you only use accessories provided by the manufacturer.

1.2.1Safety Notifications/Warnings

1.Do not use the M305 for any purpose other than the function for which it was designed: a high temperature blackbody radiance temperature source.

2.Only replace the power cable with an equal, approved cable.

3.Only remove cabinet covers during operation for trouble shooting.

Warning: High voltages and currents are present inside the enclosure.

4. Do not attempt to operate with any of the safety features bypassed or disconnected.

1.3Limit of liability and warranty

All general information and notes for handling, maintaining, and cleaning this instrument are offered according to the best of our knowledge and experience.

All Mikron blackbodies from LumaSense Technologies have a regionally effective warranty period. Please check our website at http://info.lumasenseinc.com/warranty for up-to-date

M305 Manual

General Information 5

warranty information. This warranty covers manufacturing defects and faults which arise during operation, only if they are the result of defects caused by LumaSense Technologies.

The warranty is VOID if the instrument is disassembled, tampered with, altered, or otherwise damaged without prior written consent from LumaSense Technologies; or if considered by LumaSense Technologies to be abused or used in abnormal conditions.

1.4Unpacking the Instrument

When unpacking and inspecting your system components, you need to do the following: 1. Check all materials in the container against the enclosed packing list.

Note: LumaSense Technologies cannot be responsible for shortages against the packing list unless a claim is immediately filed with the carrier. Final claim and negotiations with the carrier must be completed by the customer.

2.Carefully unpack and inspect all components for visible damage.

3.Save all packing materials, including the carrier’s identification codes, until you have inspected all components and find that there is no obvious or hidden damage.

Note: Before shipment, each instrument is assembled, calibrated, and tested at the LumaSense Factory. If you note any damage or suspect damage, immediately contact the carrier and LumaSense Technologies, Inc.

1.5Service Request, Repair, or Support

Contact LumaSense Technologies Technical Support in case of a malfunction or service request. Provide clearly stated details of the problem as well as the instrument model number and serial number. Upon receipt of this information, Technical Support will attempt to locate the fault and, if possible, solve the problem over the telephone.

If Technical Support concludes that the instrument must be returned to LumaSense Technologies for repair, they will issue a Return Material Authorization (RMA) number.

Return the instrument upon receipt of the RMA number, transportation prepaid. Clearly indicate the assigned RMA number on the shipping package exterior. Refer to Section 1.6, Shipments to LumaSense for Repair, for shipping instructions.

Technical Support can be contacted by telephone or email:

Santa Clara, California

Telephone: [phone] or [phone]

Email: [e-mail]

Frankfurt, Germany

Telephone: [phone]

Email: [e-mail]

Erstein, France

Telephone [phone]

Email: [e-mail]

1.6Shipments to LumaSense for Repair

All RMA shipments of LumaSense Technologies instruments are to be prepaid and insured by LumaSense assigned shipper. For overseas customers, ship units air-freight, priority one.

M305 Manual

General Information 6