LumaSense Technologies IS 310 User Manual

IMPAC Pyrometer

IS 310 IGA 310

MANUAL

Confidential Information

The material contained herein consists of information that is the property of LumaSense Technologies and intended solely for use by the purchaser of the equipment described in this manual. All specifications are subject to change without notice. Changes are made periodically to the information in this publication, and these changes will be incorporated in new editions.

LumaSense Technologies prohibits the duplication of any portion of this manual or the use thereof for any purpose other than the operation or maintenance of the equipment described in this manual, without the express written permission of LumaSense Technologies.

Copyright

© LumaSense Technologies 2014. All rights reserved.

Trademarks

IMPAC is a trademark of LumaSense Technologies.

All other trademarks are trademarks, registered trademarks, and/or service marks of their respective holders.

	Service Centers
LumaSense Technologies, Inc.	LumaSense Technologies GmbH
North America	Other Than North America
Sales & Service	Sales & Support
Santa Clara, CA, USA	Frankfurt, Germany
Ph: [phone]	Ph: [phone]
Ph: [phone]	Fax: [phone]
Fax: [phone]

Global and Regional Centers

Our Headquarters	Americas, Australia, & Other Asia	Europe, Middle East, Africa
LumaSense Technologies, Inc.	LumaSense Technologies, Inc.	LumaSense Technologies GmbH
Santa Clara, CA, USA	Santa Clara, CA, USA	Frankfurt, Germany
Ph: [phone]	Ph: [phone]	Ph: [phone]
Fax: [phone]	Fax: [phone]	Fax: [phone]

Brazil	India	China
LumaSense, Vendas Brasil	LumaSense Technologies, India	LumaSense Technologies, China
Campinas, Brasil	Mumbai, India	Shanghai, China
Ph: [phone]	Ph: + 91 22 67419203	Ph: [phone]
Fax: [phone]	Fax: + 91 22 67419201	Fax: [phone]

E-mail [e-mail] [e-mail] [e-mail] [e-mail]

Website http://www.lumasenseinc.com

Part No 3 856 051 - EN

Revision E

February 2014

Contents

1	General Information......................................................................................................			5
	1.1	Information about the user manual.....................................................................		5
		1.1.1	Legend.................................................................................................................	5
		1.1.2	Terminology ........................................................................................................	5
	1.2	Safety.....................................................................................................................		5
		1.2.1	Electrical connection ...........................................................................................	5
	1.3	Limit of liability and warranty .............................................................................		6
	1.4	Unpacking the Instrument ....................................................................................		6
	1.5	Transport, packing, and storage...........................................................................		6
	1.6	Service Request, Repair, or Support.....................................................................		7
	1.7	Shipments to LumaSense for Repair ....................................................................		7
	1.8	Disposal / decommissioning .................................................................................		8
2	Introduction...................................................................................................................			9
	2.1	Appropriate use.....................................................................................................		9
	2.2	Scope of delivery...................................................................................................		9
	2.3	Technical data........................................................................................................		9
	2.4	Dimensions ..........................................................................................................		10
	2.5	Accessories (option) ............................................................................................		10
3	Controls and Installation ............................................................................................			11
	3.1	Electrical Installation ..........................................................................................		11
		3.1.1 Connection of additional devices......................................................................		11
		3.1.2 Calculation of the measuring temperature from current output.....................		12
	3.2	LED targeting light..............................................................................................		12
	3.3	Optics ...................................................................................................................		12
4 Parameter descriptions / Settings...............................................................................				13
	4.1	Emissivity ..........................................................................................................		13
		4.1.1	Emissivity table ..................................................................................................	13
5	Maintenance ................................................................................................................			15
	5.1	Safety...................................................................................................................		15
	5.2	Service..................................................................................................................		15
6	Troubleshooting ..........................................................................................................			17

IS 310 / IGA 310 Manual

Contents iii

7 Reference Numbers .....................................................................................................		19
7.1	Reference numbers instrument..........................................................................	19
7.2	Reference numbers accessories..........................................................................	19
Index ..................................................................................................................................		21

IS 310 / IGA 310 Manual

Contents iv

1 General Information

1.1Information about the user manual

Congratulations on choosing the high quality and highly efficient IMPAC pyrometer.

This manual provides important information about the instrument and can be used as a work of reference for installing, operating, and maintaining your pyrometer. It is important that you carefully read the information contained in this manual and follow all safety procedures before you install or operate the instrument.

To avoid handling errors, keep this manual in a location where it will be readily accessible.

1.1.1Legend

Note: The note symbol indicates tips and useful information in this manual. All notes should be read to effectively operate the instrument.

Attention: This sign indicates special information which is necessary for a correct temperature measurement.

Warnings and Cautions: The general warnings and cautions symbol signifies the potential for bodily harm or damage to equipment.

MB Shortcut for Temperature range (in German: Messbereich)

1.1.2Terminology

The terminology used in this manual corresponds to the VDI- / VDE-directives 3511, Part 4.

1.2Safety

This manual provides important information on safely installing and operating the

pyrometer. Several sections of this manual provide safety warnings to avert danger. These safety warnings are specified with a warning symbol. You must read and understand the contents of this manual before operating the instrument even if you have used similar instruments or have already been trained by the manufacturer.

It is also important to continually pay attention to all labels and markings on the instrument and to keep the labels and markings in a permanent readable condition.

Warning: The pyrometer is only to be used as described in this manual. It is recommended that you only use accessories provided by the manufacturer.

In addition, signs and markings on the device is to be observed and maintained in legible condition.

1.2.1Electrical connection

Follow common safety regulations for mains voltage (230 or 115 V AC) connecting additional devices operating with this mains voltage (e.g. transformers). Touching mains voltage can be fatal. An incorrect connection and mounting can cause serious health or material damages.

Only qualified specialists are allowed to connect such devices to the mains voltage.

IS 310 / IGA 310 Manual

General Information 5

1.3Limit of liability and warranty

All general information and notes for handling, maintenance, and cleaning of this instrument are offered according to the best of our knowledge and experience.

LumaSense Technologies is not liable for any damages that arise from the use of any examples or processes mentioned in this manual or in case the content of this document should be incomplete or incorrect. LumaSense Technologies reserves the right to revise this document and to make changes from time to time in the content hereof without obligation to notify any person or persons of such revisions or changes.

All instruments from LumaSense Technologies have a regionally effective warranty period. Please check our website at http://info.lumasenseinc.com/warranty for up-to-date warranty information. This warranty covers manufacturing defects and faults which arise during operation, only if they are the result of defects caused by LumaSense Technologies.

The Windows compatible software was thoroughly tested on a wide range of Windows operating systems and in several world languages. Nevertheless, there is always a possibility that a Windows or PC configuration or some other unforeseen condition exists that would cause the software not to run smoothly. The manufacturer assumes no responsibility or liability and will not guarantee the performance of the software. Liability regarding any direct or indirect damage caused by this software is excluded.

The warranty is VOID if the instrument is disassembled, tampered with, altered, or otherwise damaged without prior written consent from LumaSense Technologies; or if considered by LumaSense Technologies to be abused or used in abnormal conditions.

There are no user-serviceable components in the instrument.

1.4Unpacking the Instrument

Before shipment, each instrument is assembled, calibrated, and tested at the LumaSense Factory. When unpacking and inspecting your system components, you need to do the following:

1.Check all materials in the container against the enclosed packing list.

LumaSense Technologies cannot be responsible for shortages against the packing list unless a claim is immediately filed with the carrier. Final claim and negotiations with the carrier must be completed by the customer.

2.Carefully unpack and inspect all components for visible damage. If you note any damage or suspect damage, immediately contact the carrier and LumaSense Technologies, Inc.

3.Save all packing materials, including the carrier’s identification codes, until you have inspected all components and find that there is no obvious or hidden damage.

Note: LumaSense encourages you to register your product with us to receive updates, product information, and special service offers: http://www.info.lumasenseinc.com/registration.

1.5Transport, packing, and storage

With faulty shipping, the instrument can be damaged or destroyed. To transport or store the instrument, please use the original box or a box padded with sufficient shock-absorbing material. For storage in humid areas or shipment overseas, the device should be placed in welded foil (ideally along with silica gel) to protect it from humidity.

The pyrometer is designed for a storage temperature of -20 to 70 °C with non-condensing conditions. Storing the instrument out of these conditions can cause damage or result in malfunction of the pyrometer.

IS 310 / IGA 310 Manual

General Information 6

1.6 Service Request, Repair, or Support

Contact LumaSense Technologies Technical Support in case of a malfunction or service request. Provide clearly stated details of the problem as well as the instrument model number and serial number. Upon receipt of this information, Technical Support will attempt to locate the fault and, if possible, solve the problem over the telephone.

If Technical Support concludes that the instrument must be returned to LumaSense Technologies for repair, they will issue a Return Material Authorization (RMA) number.

Return the instrument upon receipt of the RMA number, transportation prepaid. Clearly indicate the assigned RMA number on the shipping package exterior. Refer to Section 1.7, Shipments to LumaSense for Repair, for shipping instructions.

Technical Support can be contacted by telephone or email:

Santa Clara, California

Telephone: [phone] or [phone]

Email: [e-mail]

Frankfurt, Germany

Telephone: [phone]

Email: [e-mail]

Erstein, France

Telephone [phone]

Email [e-mail]

1.7Shipments to LumaSense for Repair

All RMA shipments of LumaSense Technologies instruments are to be prepaid and insured by way of United Parcel Service (UPS) or preferred choice. For overseas customers, ship units airfreight, priority one.

The instrument must be shipped in the original packing container or its equivalent. LumaSense Technologies is not responsible for freight damage to instruments that are improperly packed.

Contact us to obtain an RMA number (if one has not already been assigned by Technical Support). Clearly indicate the assigned RMA number on the shipping package exterior.

Send RMA Shipments to your nearest technical service center:

Santa Clara, California	Frankfurt, Germany
LumaSense Technologies, Inc.	LumaSense Technologies GmbH
3301 Leonard Court	Kleyerstr. 90
Santa Clara, CA 95054 USA	60326 Frankfurt
Telephone: [phone]	Germany
[phone]	Telephone: [phone]
Email: [e-mail]	Email: [e-mail]

IS 310 / IGA 310 Manual

General Information 7