Getting started with
Ultimate Ears™ 900
Noise-Isolating Earphones
UE 900 UE 900
Package contents
1. UE 900 earphones with audio cable
2. Vi Cable with microphone and control
3. Soft silicone ear cushions,
5 additional pairs: XXS, XS, S, M, L
4. Comply™ Foam Tips,
3 pairs of ear cushions: S, M, L
5. ¼-inch (6.35 mm) adapter
6. Airline adapter (reduces in-flight
volume spikes)
7. Protective hard case
8. Pouch
1
2
3
7
4
Features
1. Earphone
2. 3.5 mm connector
3. Pre-formed ear loop
4. Detachable cable
5. Volume up
6. Media/calling controls
• One click:
Play/pause (audio source)
Call answer/hang up (mobile phone)
• Double click:
Next track (audio source)
• Triple click:
Previous track (audio source)
7. Volume down
8. Ear cushion retaining rib
9. Microphone
1
2
8
3
5
4
6
9
7
5
8
6
English 32 English
UE 900 UE 900
Setup
1
3
XSXXS
LMS
4
Changing cables
Comply™
Foam Tips
Choose ear cushion size for comfortable fit and
good sound. Go to www.logitech.com/support/
ue900 for more information about choosing
ear cushions.
2
Attach ear cushions to earphones. Push cushion
past rib for secure fit.
LMS
Connect earphones to a device with 3.5 mm
headphone jack.
For air travel, use Airline adapter to reduce volume
spikes caused by in-flight announcements.
For devices with a ¼-inch (6.35 mm) input jack,
use the ¼-inch (6.35 mm) adapter.
Wear the earphones
1. Wrap cable around ear.
2. Insert right earphone (marked “R”) in right ear
and left earphone (marked “L”) in left ear.
3. When using the vi cable with microphone,
gently pull cable tight to remove slack.
4. When using the audio-only cable, slide cinch up
the back of the head until secure.
Note: Do not remove earphone from ear by pulling
on cable.
1. Hold earphone. Hold cable where it attaches to
earphone.
2. Gently pull cable from earphone.
3. Attach new cable. Cable snaps into place.
Note: Make sure to connect the “R” (right) cable to
the “R” earphone and the “L” (left) cable to the “L”
earphone.
English 54 English
UE 900 UE 900
Cleaning the earphones
Remove cushion and wipe with clean cloth.
Storing the earphones
1. Wrap cable around three fingers.
2. Place earphones in case.
Troubleshooting
• No sound or faint sound Fully insert cable
connector into headphone jack on your device.
Check cable attachment to earphone. Try
increasing earphone volume, and check the
volume in your media application.
• Diminished sound quality or weak
bass Check ear cushion seal. Try another
ear cushion size. Check for blockage where
ear cushion connects to earphone. Remove
blockage with clean cloth.
• Earphones not working with a
computer Specify audio settings for your
operating system:
Windows® (Control Panel)
• Voice playback and recording: Computer’s
soundcard
• Sound playback: Computer’s speakers
Mac® OS (Preferences)
• Sound input: Internal microphone
• Sound output: Internal speakers
For more information, go to www.logitech.com/
support/ue900. Also refer to your operating
system documentation.
• Detached ear cushion Make sure to press ear
cushion past rib on earphone.
www.logitech.com/support/ue900
United States +1 646-454-3200
Additional help
For online help, go to www.logitech.com/support/
ue900
What do you think?
Please take a minute to tell us.
Thank you for purchasing our product.
www.logitech.com/ithink
English 76 English
POWER TO THE MUSIC
www.logitech.com
© 2012 Logitech. Logitech, the Logitech logo, and other Logitech marks are owned by Logitech and may be registered.
Microsoft, Windows, and the Windows logo are trademarks of the Microsoft group of companies. Mac and the Mac logo
are trademarks of Apple Inc., registered in the U.S. and other countries. Comply is a registered trademark of Hearing
Components. All other trademarks are the property of their respective owners. Logitech assumes no responsibility for any
errors that may appear in this manual. Information contained herein is subject to change without notice.
620-004015.005
Loading...