LG LH-T7632MB Manual

0 (0)

LH-T7632MB_JA3SLLA_ENG

DVD RECEIVER OWNER’S MANUAL

MODEL: LH-T7632MB

(Main Unit: LH-T7632

Speakers: LHS-76MBF, LHS-76MBC, LHS-76MBS, LHS-76MBW)

USB

Before connecting up, operating or repairing this product, please read this instruction booklet carefully and completely.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK

OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating.

The openings should be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction have been adhered to.

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

LUOKAN 1 LASER LAITE

KLASS 1 LASER APPARAT

CLASSE 1 PRODUIT LASER

CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED.

CAUTION:

This product employs a Laser System.

To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service center.

Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.

CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit;

That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.

Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord

exits the appliance.

To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.

Introduction

Maintenance and Service . . . . . . . . . . . . . . . . .3 Before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Front Panel/Rear Panel . . . . . . . . . . . . . . . . . . .5 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . .6

Installation and Setup

TV Connections . . . . . . . . . . . . . . . . . . . . . . . . .7 Optional Equipment Connections . . . . . . . . . . .8 Antenna Connections . . . . . . . . . . . . . . . . . . . .8 Assembling and Connecting to the Speakers .9 Speaker System Connection . . . . . . . . . . . . . . .9 Displaying Disc Information on-screen . . . . . .10 Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . .10 General Operation . . . . . . . . . . . . . . . . . . . . . .10

Language . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 5.1 Speaker Setup . . . . . . . . . . . . . . . . . . . . .12 Lock (Parental Control) . . . . . . . . . . . . . . . . .13 Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Operation

General features . . . . . . . . . . . . . . . . . . . . . . .14 Additional features . . . . . . . . . . . . . . . . . . . . .15 Controlling the TV . . . . . . . . . . . . . . . . . . . . . .15 Playing an Audio CD or MP3/WMA file . . . . . .16 Programmed Playback . . . . . . . . . . . . . . . . . .16 Viewing a JPEG file . . . . . . . . . . . . . . . . . . . .17 Playing a DivX Movie file . . . . . . . . . . . . . . . . .18 DVD Audio Discs . . . . . . . . . . . . . . . . . . . . . . .19 Presetting the Radio Stations . . . . . . . . . . . . .20 Listening to the Radio . . . . . . . . . . . . . . . . . . .20 Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . .21 Dimmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Using Headphone Jack . . . . . . . . . . . . . . . . . .21 Selecting input source . . . . . . . . . . . . . . . . . . .21 XTS/XTS pro . . . . . . . . . . . . . . . . . . . . . . . . . . .21 VIRTUAL sound . . . . . . . . . . . . . . . . . . . . . . . .21 Sound Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .21

REFERENCE

Language Codes . . . . . . . . . . . . . . . . . . . . . . .22

Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Troubleshooting . . . . . . . . . . . . . . . . . . . . .23-24

Specifications . . . . . . . . . . . . . . . . . . . . . . . . .25

Maintenance and Service

Refer to the information in this chapter before contacting a service technician.

HANDLING THE UNIT

When shipping the unit

Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory.

Keeping the exterior surfaces clean

Do not use volatile liquids such as insecticide spray near the unit.

Do not leave rubber or plastic products in contact with the unit for a long period of time. since they leave marks on the surface.

Cleaning the unit

To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution.

Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit.

Maintaining the Unit

The DVD/CD Receiver is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality could be diminished.

Depending on the operating environment, regular inspection and maintenance are recommended after every 1,000 hours of use.

For details, please contact your nearest authorized service center.

Introduction

Before use

To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference.

This manual provides information on the operation and maintenance of your DVD/CD Receiver. Should the unit require service, contact an authorized service location.

About the Symbol Display

“ ” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific DVD video disc.

Symbol Used in this Manual

Note:

Indicates special notes and operating features.

Tip:

Indicates tips and hints for making the task easier.

A section whose title has one of the following symbols is applicable only to the disc represented by the symbol.

DVD-V DVD and finalized DVD±R/RW

DVD Audio discs

Video CDs

Audio CDs

MP3 Discs

WMA Discs

JPEG Discs

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved.

Manufactured under license from Digital Theater Systems, Inc. U.S. Pat. No’s. 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535 and other U.S. and worldwide patents issued and pending. "DTS" and "DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc. Copyright 1996, 2003 Digital Theater Systems, Inc. All Rights Reserved."

Types of Playable Discs

DVD

(8 cm / 12 cm disc)

Video CD (VCD) (8 cm / 12 cm disc)

Audio CD

(8 cm / 12 cm disc)

In addition, this unit can play a DVD-RW, DVD+RW, SVCD and CD-R or CD-RW that contains audio titles, MP3, WMA, JPEG or DivX files.

Notes:

Depending on the conditions of the recording equipment or the CD-R/RW (or DVD-RW, DVD+RW) disc itself, some CD-R/RW (or DVD-RW, DVD+RW) discs cannot be played on the unit.

Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.

Do not use irregularly shaped CDs (e.g., heartshaped or octagonal). It may result in malfunctions.

Regional Code

This unit has a regional code printed on the rear of the unit. This unit can play only DVD discs labelled same as the rear of the unit or “ALL”.

Notes on Regional Codes

Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must match your DVD player’s regional code or the disc cannot play.

If you try to play a DVD with a different regional code from your player, the message “Check Regional Code” appears on the TV screen.

Front Panel/Rear Panel

MIC 1/MIC 2

Connect a microphone to MIC 1 or MIC

2 or to both sockets.

PHONES connector

STANDBY/ON

DISC Tray

FUNC./PLAY

STANDBY indicator

OPEN/CLOSE button

Press and hold down this button about 3

Lights red when the

seconds, then press repeatedly to select

receiver is in Standby

other function.

mode (off).

DISPLAY Window

VOLUME controller

Remote sensor

USB port	MONO/ST./
Connect to a USB port of		TUNING(-/+)
a memory device	P./STEP
		/SKIP(.bb/BB>)
(USB memory etc.)	STOP
		buttons

Power Cord

SPEAKER connectors

FM Antenna connector

AUDIO

AM Loop Antenna connectors

S-VIDEO OUT connector

Cooling fan

MONITOR OUT connector

COMPONENT VIDEO OUT terminals

Connect to a TV with Y Pb Pr inputs.

AV1 AUDIO Input (L/R)/VIDEO IN Connectors

AV2 AUDIO Input (L/R)/VIDEO IN Connectors

Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.

Introduction

Remote Control

POWER

DVD

Select the output source (CD/DVD).

BAND

Select the System’s tuner (FM and AM bands)

0-9 numerical buttons

Select a service, programme number directly or select numbered options in a menu.

XTS pro

To enjoy more natural and realistic sound.

To enjoy great sound effect.

AUDIO

Selects an audio language (DVD) or an audio channel (CD).

SOUND

Selects the sound mode.

SETUP

Accesses or removes setup menu .

OPEN/CLOSE (Z)

Opens and closes the disc tray.

AUX

Selects input source.

USB

To enjoy the multimedia files.

VIRTUAL

Selects the VIRTUAL sound

MARKER

Marks a point during playback.

Displays MARKER SEARCH menu.

SUBTITLE

Selects a subtitle language (DVD).

RETURN

Removes the setup menu.

DISPLAY

Accesses On-Screen display.

b/B/v/V (left/right/up/down)

Selects an option in the menu.

ENTER

Acknowledges the menu selection.

PRESET(v/V)

Select programme of Radio.

TUN.(-/+) (b/B)

To tune in the desired radio station.

TITLE

Displays the disc’s Title menu, if available.

VOLUME (+/-)

Accesses the menu on a DVD disc.

SCAN/SLOW(bb/BB)

Search backward or forward.

Reverse/ Forward slow playback.

REVERSE/FORWARD SKIP (./>) STOP (x)

PAUSE/STEP (X) PLAY (B)

REPEAT

Repeat chapter, track, title, all

REPEAT A-B

Repeats sequence.

ECHO VOL.(V/v)

Adjusts echo volume

MIC VOL.(V/v)

Adjusts microphone volume

Remote Control Operation Range

Point the Remote Control at the remote sensor and press the buttons.

Distance: About 23 ft (7 m) from the front of the remote sensor

Angle: About 30° in each direction in front of the remote sensor

Caution

To adjust speaker volume.

PROG.

Accesses or removes Program menu.

MEMO.

Enter a radio station’s frequency into the tuner.

CLEAR

Removes a track number on the program menu or a mark on the MARKER SEARCH menu.

MUTE

ZOOM

SLEEP

Set the System to turn off automatically at a specified time.

DIMMER

Press to change brightness of the display window on the front panel during in power-on status.

To control the TV. (LG TV only) (See page15)

Remote Control battery installation

Remove the battery cover on the rear of the Remote Control, and insert two R03 (size AAA) batteries with and aligned correctly.

Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.).

Installation and Setup

TV Connections

Make one of the following connections, depending on the capabilities of your existing equipment.

Tips:

Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD Receiver. Use one of the connections described below.

Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections.

Caution:

Make sure the DVD/CD Receiver is connected directly to the TV. Select the correct AV input on your TV.

Do not connect your DVD/CD Receiver to TV via your VCR. The DVD image could be distorted by the copy protection system.

S-Video connection

Connect the S-VIDEO OUT jack on the DVD/CD Receiver to the S-VIDEO IN jack on the TV using the S-Video cable (S).

Video connection

Connect the MONITOR OUT jack from the DVD/CD Receiver to the VIDEO IN jack on the TV using the video cable supplied (V).

Component Video (Color Stream®) connection

Connect the COMPONENT VIDEO OUT jacks from the DVD/CD Receiver to the corresponding in jacks on the TV using an Y Pb Pr cable (C).

Rear of TV

S-VIDEO	VIDEO		COMPONENT VIDEO /
INPUT	INPUT	PROGRESSIVE SCAN INPUT
	L	Y	Pb	Pr

S V C

AUDIO

Rear of DVD/CD Receiver

Installation and Setup

Optional Equipment Connections

1.Connect a VCR to the AV IN connectors.

2.Connect the USB port of USB Memory (or MP3 player, etc.) to the USB port on the front of the unit.

Front of DVD/CD Receiver	Rear of VCR
	IN	OUT
	VIDEO
	AUDIO (L)
	AUDIO (R)
USB Memory, MP3 Player (or	To AUDIO OUT (L/R)/
Memory Card Reader, etc.)	VIDEO OUT
	To AV IN AUDIO (L/R)/
	VIDEO
	L
	AUDIO
	R

To Remove the USB from the unit

1.Choose a different function mode or press the STOP (x) twice in a row.

2.Remove the USB from the unit.

To Remove the USB Device from the unit

1.Choose a different function mode or press the STOP (x) twice in a row.

2.Remove the USB device from the unit.

Notes:

Don’t extract the USB device while operating.

Music files (MP3/WMA), image files (JPEG) and DivX files can be played.

This unit can not use a USB HUB.

Recommended Memory Cards.

Compact Flash Card (CFC), Micro Drive (MD), Smart Media Card (SMC), Memory Stick (MS), Secure Digital Card (SD), Multi Media Card (MMC), Memory Stick Pro (MS-Pro)

-Compatable with : FAT16, FAT32

-Only use the memory cards recommended.

Devices which require additional program installation when you have connected the unit to a computer are not supported.

In case of a USB HDD, make sure to connect an auxiliary power cord to the USB HDD for proper operation. Up to four primary partitions of a drive are supported. If there is an extention partition, it will not be supported.

If the drive of USB device is two or more, a drive folder is displayed on the screen. If you want to move to the initial menu after you select a folder, press RETURN.

Digital cameras and mobile phones are not supported.

Antenna Connections

Connect the supplied FM/AM antenna for listening to the radio.

Connect the AM Loop antenna to the AM antenna connector.

Connect the FM Wire antenna to the FM antenna connector.

Notes:

To prevent noise pickup, keep the AM Loop antenna away from the DVD/CD Receiver and other components.

Be sure to fully extend the FM wire antenna.

After connecting the FM Wire antenna, keep it as horizontal as possible.

AM Loop Antenna FM Wire Antenna (supplied) (supplied)