LG GWL227YSAA, GWP227YLQA, GWB227YSAA, GWB227WLQA, GWP227YUQA Owner's Manual

Electrical Connections

(In the UK Only)

Important The wires in this mains lead are coloured in accordance with the following code :

GREEN AND YELLOW : EARTH

BLUE : NEUTRAL

BROWN : LIVE

This appliance must be earthed

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows :

The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol( ) or coloured Green or Green and Yellow.

The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black.

The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Red.

If a 13 amp(BS 1363) plug is used, fit a 13 amp BS 1362 fuse.

1

Introduction

Installation

Operation

Suggestion on food storage

Care and maintenance

Table of contents

	3
Important safety instruction	3
Identification of parts	4
Where to install	6
Door removal	7
Door replacement	8
Feed water pipe installation	8
Height adjustment	9
Starting	10
Adjusting the temperatures and functions	10

Refreshment center (Applicable to some models only) Shelf (Applicable to some models only)

Wine holder (Applicable to some models only) Egg box

Humidity control in the vegetable compartment

Convert into a vegetable or meat compartment (Applicable to some models only) Deodorizer (Applicable to some models only)

Miracle Zone Temperature Transition Corner (Applicable to some models only) Temperature Change at Miracle Zone (Applicable to some models only) Miracle Zone (Applicable to some models only)

Location of foods

Storing foods

How to dismantle parts

General information

Cleaning

Trouble shooting

2

Introduction

Entry

The model and serial numbers are found on the inner case or back of refrigerator compartment of this unit. These numbers are unique to this unit and not available to others. You should record requested information here and retain this guide as a permanent record of your purchase. Staple your receipt here.

Date of purchase	:
Dealer purchased from	:
Dealer address	:
Dealer phone no.	:
Model no.	:
Serial no.	:

Important safety instruction

Before it is used, this refrigerator must be properly installed and located in accordance with the installation instructions in this document.

Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and pull it straight out from the outlet.

When moving your appliance away from the wall, be careful not to roll over the power cord or to damage it in any way.

After your refrigerator is in operation, do not touch the cold surfaces in the freezer compartment, particularly when your hands are damp or wet. Skin could adhere to these extremely cold surfaces.

Unplug the power cord from the power outlet for cleaning or other requirements. Never touch it with wet hands because you can get an electric shock or be hurt.

Never damage, process, severely bend, pull out, or twist the power cord because damage the power cord may cause a fire or electric shock. You have doubts on whether the appliance is properly grounded.

Never place glass products in the freezer because they may be broken due to expansion when their contents are frozen.

Never allow your hands within the ice storage bin of the automatic ice maker. You could be hurt by the operation of the automatic ice maker.

The appliance is not intended for use by young children or infirm persons without supervision.

Young children should be supervised to ensure that they do not play with the appliance.

Never allow anyone to climb, sit, stand or hang on the refreshment center door. These actions may damage the refrigerator and even tip it over, causing severe personal injury.

Don’t use an If possible, connect the refrigerator to its own individual electrical outlet to prevent it and

extension cord other appliances or household lights from causing an overload that could cause a power outage.

Accessibility of The refrigerator-freezer should be so positioned that the supply plug is accessible for Supply Plug quick disconnection when accident happens.

Supply Cord If the supply cord is damaged, it must be replaced by the manufacturer or its service Replacement agent or a similarly qualified person in order to avoid a hazard.

Warning	Do not modify or extend the Power Cord length.
	It will cause electric shock or fire.
	3

				Introduction
			Child entrapment	DANGER: Risk of child entrapment.
			warning	Before you throw away your old refrigerator or freezer:
				Take off the doors but leave the shelves in place so that children may not easily climb
				inside.
				The appliance is not intended for use by young children or infirm persons without
				supervision.
				Young children should be supervised to ensure that they do not play with the appliance.
			Don’t store	Don’t store or use gasoline or other flammable vapor and liquids in the vicinity of this or
			warning	any other appliance.

Grounding (Earthing) In the event of an electric short circuit, grounding (earthing) reduces the risk of electric

warning shock by providing an escape wire for the electric current.

In order to prevent possible electric shock, this appliance must be grounded improper use of the grounding plug can result in an electric shock. Consult a qualified electrician or service person if the grounding instructions are not completely understood, or if you have doubts on whether the appliance is properly grounded.

	Identification of parts
	*Non dispenser model
	Freezer	Refrigerator
	Compartment	Compartment
		Milk product corner
	Door rack	Lamp
		Shelf
	Shelf or Drawer	Wine holder (Plastic or wire)
		Door rack (1piece or 2piece)
	Lamp	Shelf
	Shelf or Drawer
		Snack drawer (Optional)
		Shelf (Folding or Normal)
		Refreshment center (Optional)
		Egg Box
		Door rack (1piece or 2piece)
	Door rack	Vegetable Drawer
		(1 or 2)
	Drawer (2 or 3)	Door Rack
		Humidity switch
		Miracle Zone (Optional)
		Fresh compartment
	Door rack	(Optional)
	Lower cover	Conversion switch
		(Meats/Vegetables)
		(Optional)
	NOTE
	• Parts, features, and options vary by model. Your model may not include every option.
	4

Introduction

*Dispenser model

Automatic

Icemaker

Shelf or Drawer

Lamp

Shelf or Drawer

Drawer

Door rack

Drawer (2 or 3)

Door rack

Lower cover

Freezer

Compartment

Refrigerator

Compartment

Milk product corner

Lamp

Shelf

Wine holder (Plastic or wire) Door Rack

Shelf

Can Server (Optional) Snack drawer (Optional)

Shelf (Folding or Normal)

Refreshment center (Optional)

Egg Box

Vegetable Drawer (1 or 2)

Humidity switch

Miracle Zone (Optional) Fresh compartment (Optional)

Door Rack

Conversion switch (Meats/Vegetables) (Optional)

NOTE

• Parts, features, and options vary by model. Your model may not include every option.

5

Installation

	Where to Install
Select a good	1. Place your appliance where it is easy to
location		use.
	2.	Avoid placing the unit near heat sources,
		direct sunlight or moisture.
	3.	To ensure proper air circulation around the
		fridge -freezer, please maintain sufficient
		space on both the sides as well as top and
		maintain at least 2 inches (5 cm) from the
		rear wall.
	4.	To avoid vibrations, the appliance must
		be leveled.
	5.	Don't install the appliance below 5°C. It may cause affect the performance.
Disposal of the	This appliance contains fluid (refrigerant, lubricant)and is made of parts and materials
old appliance	which are reusable and/or recyclable.
	All the important materials should be sent to the collection center of waste material
	and can be reused after rework (recycling). For take back, please contact with the
	local agency.

6

Installation

		Door removal
	Warning	Electric Shock Hazard
		Disconnect electrical supply to refrigerator before installing.
		Failure to do so could result in death or serious injury.
		If your access door is too narrow for the
		refrigerator to pass through, remove the		Lower cover
		refrigerator door and pass the refrigerator laterally.
	Remove lower
		Remove the lower cover by lifting upward, and
	cover and	remove clip, and then pull up the feed water tube
	then feed water	while pressing area shown in the figure to the		Feed water tube
	tube	right.
		NOTE
		• If a tube end is deformed or abraded, cut the part away.
			Hinge	Connection
			cover
	Remove the	1) Removing the hinge cover by loosening the		wires
	freezer	screws. Separate all connection wires except
	compartment	for the earth line after.		Earth line
	door	Upper hinge
				Upper hinge
		2) Remove the keeper by rotating it counter	Keeper

clockwise ( ) and then lifting the upper hinge up ( ).

NOTE

• When removing the upper hinge, be careful that the door does not fall forwards .

3) Remove the freezer compartment door by

lifting it upward. This time, the door should be lifted enough for the feed water pipe tube to be completely pulled out.

Lower hinge

NOTE

•Move the refrigerator compartment door passing through the access door and lay it down, but be careful not to damage the feed water pipe

Remove the	1) Loosen the hinge cover screws and remove
refrigerator	the cover. Remove connection wire, if any,
door	except for the earth line.
		Connection
		wires
	2) Remove keeper by rotating it clockwise ( )	Upper hinge	Keeper
	and then remove the upper hinge by lifting
	it up ( ).

3) Remove the refrigerator compartment door by lifting it up.

7

Lower hinge

Installation

Pass the Pass the refrigerator laterally through the access refrigerator door as shown in the right figure.

Door replacement

Mount them in the reverse sequence of removal after they pass through the access door.

Feed water pipe installation

(*Dispenser model only)

Before Automatic ice maker operation needs water pressure of 147~834 kPa (1.5~8.5 installation kgf/cm2) (That is, an instant paper cup (180 cc) will be fully filled within 3 sec.).

If water pressure does not reach the rating 147 kPa (1.5 kgf/cm2) or below, it is necessary to purchase a separate pressure pump for normal automatic icing and cool water feed.

Keep the total length of the feed water pipe tube within 8 m and be careful for the tube not be bent. If the tube is 8 m or longer it may cause trouble in water feed owing to the drain water pressure.

Install the feed water pipe tube at a place free from heat.

Warning

Connect to potable water supply only.

Refer to instructions with water filter kit for installation.

8