La Crosse Technology WS-9215 User Manual

WEATHER STATION

INSTANT TRANSMISSION is the state-of-the-art new wireless transmission technology, exclusively designed and developed by LA CROSSE TECHNOLOGY. INSTANT TRANSMISSION offers you an immediate update (every 4 seconds!) of all your outdoor data measured from the transmitters: follow your climatic variations in real-time!

This product offers:

INVENTORY OF CONTENTS

1. Wireless Temperature Station

2. Wireless Temperature Sensor (TX40U-IT) and mounting bracket.

3. Instruction Manual

Instruction Manual

LCD

display

FEATURES:

Function

keys

Hanging hole

Battery compartment cover

Detachable stand

The Weather Station

 12/24 hour display  Calendar (year, month and day display in setting mode only)  Temperature display in degrees Celsius (ºC) or Farenheit (ºF)  Indoor and outdor temperature with MIN/MAX records

 Manual reset of MIN/MAX records  3 weather forecast icons with weather tendency indicator  Wireless transmission at 915 MHz  Signal reception interval at 4 seconds  Low battery indicators  Wall mounting or table standing (detachable stand)

The Outdoor Temperature Transmitter

 Remote transmission of outdoor temperature to weather station by 915 MHz

signals

 Shower proof casing  Wall mounting and table-standing

SET UP:

Note: This weather station receives only one outdoor transmitter. Do not mix old and new batteries. Do not mix alkaline, standard, or rechargeable batteries.

1. First, insert the batteries into the temperature transmitter. (see “Install and replace batteries in the temperature transmitter“).

2. Within 30 seconds, insert the batteries into weather station (see “Install and replace batteries in the weather station”). Once the batteries are in place, all segments of the LCD will light up briefly. Then the time

(default 12:00) and the weather icon will be displayed. If these are not displayed after 60 seconds, remove the batteries and wait for at least 60 seconds before reinserting them.

3. After inserting the batteries, the weather station will start receiving data from the transmitter. The outdoor temperature and the signal reception icon should then be displayed on the weather station. If this does not happen after 3 minutes, the batteries will need to be removed from both units and reset from step 1.

4. In order to ensure successful 915 MHz transmission, this should under good conditions be a distance no more than 200 feet/100 meters between the final position of the weather station and the transmitter (see notes on “Mounting” and “915 MHz Reception”).

HOW TO INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION

HOW TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER

The weather station uses 2 x AA, IEC LR6, 1.5V batteries. When batteries need to be replaced, the low battery icon will appear on the LCD. To install and replace the batteries, please follow the steps below:

1. Lift up the battery compartment cover.

2. Insert batteries observing the correct polarity (see marking).

3. Replace compartment cover.

The temperature transmitter uses 2 x AAA, IEC LR3, 1.5V batteries. To install and replace the batteries, please follow the steps below:

BATTERY CHANGE:

It is recommended to replace the batteries in all units regularly to ensure optimum accuracy of these units (Battery life see “Specifications”).

1. Remove the battery compartment cover at the back of the transmitter.

2. Insert the batteries, observing the correct polarity (see marking).

3. Replace the battery compartment cover on the unit.

Note:

In the event of changing batteries in any of the units, all units need to be reset by following the setting up procedures. This is because a security code is assigned by the transmitter at start-up and this code must be received and stored by the Weather station in the first 3 minutes of power being supplied to it.

Please participate in the preservation of the environment. Return used batteries to an authorized depot.

SET key

INDOOR/RESET key

+ key

OUTDOOR key

FUNCTION KEYS:

Weather station:

The weather station has four easy to use function keys.

SET key

 Press and hold to enter manual setting modes: 12/24 hour time, manual time, calendar, ºF/ºC temperature

unit setting

+ key

 To change any values in manual set modes

INDOOR/RESET key

 To display indoor MIN/MAX temperature records  Press and hold to reset all indoor and outdoor MIN/MAX temperature records

OUTDOOR key

 To display outdoor MIN/MAX temperature records

Outdoor reception Signal icon *

Indoor

temperature

in °F/ºC

Outdoor

temperature in

°F/ºC

Weather tendency

indicator

Low battery indicator (weather station)

Maximum icon

Time

Weather forecast icon

Low battery indicator (transmitter)

Minimum icon

LCD SCREEN:

+ 18 hidden pages