La Crosse Technology WS6835 Quick Setup Manual

Time

Calendar +
Alarm

Color
Animated
Forecast +

Tendency

Outdoor
Humidity
with Trend

Indoor

Temperature

with Trend

Indoor/Outdoor
Temperature
Alerts + Indoor
Humidity with
Trend

OUTDOOR SENSOR
TX141TH-BV2

Outdoor

Temperature

with Trend

Sensor
Battery
Cover

Sensor Battery

Compartment

2 “AA”

Battery
Compartment
3 “AAA”

AC Power
Jack
DC 5.0V

HX0180500150D2E

Base

Stand

24 Hour
Pressure
History
Graph with
Trend

FRONT

VIEW

SIDE BUTTONS

Moon Phase

LED

TX

BACK

VIEW

FRONT BUTTONS

Wall

Hanging

Holes

WIRELESS COLOR FORECAST STATION

Page | 1

Model: WS6835

Quick Setup Guide

Get Started

Step 1: Insert the 5 volt AC cord (included) into the wall outlet then into

the forecast station.
Step 2: Insert the 3 new AAA Alkaline batteries (not included) into the
forecast station. Observe the correct polarity.
Step 3: Insert the 2 new AA batteries (not included) into the
TX141TH-BV2 outdoor sensor. Observe the correct polarity. The red LED
will flash during transmission.

Restart: If there is no outdoor temperature/humidity data after 3 minutes, unplug
the AC adapter and remove batteries from the forecast station & outdoor sensor
for 15 minutes. Return to Step 1 above.

Set Time, Date, Temperature Unit

1. Hold the TIME SET button to enter time set mode.

2. Press the ▼ or ▲ buttons to adjust the values.

3. Press the TIME SET button to confirm adjustments and move to the
next item.

4. The default week language is French.

Time setting order:

1. Beep on/off

2. Time Zone +/-12 H

3. 12/24 hour time format

4. Hour

5. Minutes

6. Year

7. Month

8. Date

9. Celsius/Fahrenheit

10. Language(FRE,GER, ITA, DUT, SPA, DAN, ENG)

 Press the SNOOZE/LIGHT(HI-LOW-OFF) button to exit, or wait 20

seconds without pressing buttons to return to the normal time display.

 When in setting mode of any feature, all the rest of the information of

the LCD should disappear, only concentrate in the setting of the
feature.

Set Indoor and Outdoor Temperature Alerts

1. Hold the ALERTES button until the station beeps.

2. The temperature alert value will blink in set mode.

3. Press the ▼ or ▲ buttons to adjust the values.

Page | 2

4. Press the ALERTES button to confirm & move to the next alert.

The temperature alert order:

1. Outdoor High (HA), 2. Outdoor Low (BA), 3. Indoor High (HA), 4.

Indoor Low (BA)

Arms/Disarms Temperature Alerts

Press and release the ALERTES button to toggle between
the alerts Outdoor HI (HA)/Outdoor LOW (BA)/Indoor HI
(HA)/Indoor LOW (BA).

 Press the ▲ button to arm the alert.
 Press the ▼ button to disarm the alert.
 ALERT BELL ICON appears when armed.

Active Temperature Alert

 Beeps once per minute with flashing alert bell icon.
 Press any button to stop the alert.

Set Time Alarm

1. Hold the ALARME button to enter alarm time set mode.

2. Press the ▼ or ▲ buttons to adjust the values.

3. Press the ALARME button to confirm & move to the next
item.

Alarm Time setting order: 1. Hours, 2. Minutes

Activate/Deactivate Time Alarm

 Press the ALARME button once to view alarm time.
 Press the ALARME button again to activate the alarm.

Once activated, the bell icon appears.

 Press the ALARME button again to deactivate the alarm.

The bell icon will disappear.

Snooze (Silences Alarm Temporarily)

 When alarm sounds, press the SNOOZE/LIGHT button to

silence the alarm for 10 minutes. The alarm icon (Zz) will
flash.

 To stop alarm for one day, press any button but not

HI/LOW/OFF button, while in snooze mode. The alarm icon
will show solid.

Page | 3