Konica Minolta bizhub 283, bizhub 363, bizhub 423, bizhub 224e, bizhub 284e Use Manual

Job List screen

A1UD-9599-00

3

12

4
5

1. Pull out the desired tray.

2. Slide the lateral guides to fit the

size of paper to be loaded.

3. Load the paper into the tray.

Multiple Jobs

From the Job List screens, multiple jobs can be managed.

The Job List screen can be displayed if [Job List] is pressed

while the Basic screen is displayed in the touch panel.

Position the original to be copied.

To stop copying, press

the [Stop] key.

6

Press the [Start] key.

To change the setting for the number

of copies, press the [C] key, and then

specify the desired number of copies.

5

Specify the number of copies.

Place the original face

down on the original glass.

Load the original face up

into the reverse automatic

document feeder.

Print copies at full size
with the same color
and on paper of the
same size as the
original.

The finishing method and various
other settings can be specified.

(O

Contrast

Parameter

Copy Density

Parameter

Sharpness

Parameter

(-3)

(-3)

(-3)

1

Displays a list of the

jobs queued to be

printed

2

Displays a list of the

jobs that have been

printed

3

Queued jobs can be

prioritized (interrupt

printing) so that they

will be printed before

other jobs.

4

Displays the settings

for a job that is queued

to be printed

5

Displays detailed

information for the

selected job

(+3)

(+3)

(+3)

2

3

4

For more detailed operating procedures and instructions, refer to the User

s Guide.

The images that are provided are print samples.

They may slightly differ in color with actual copies.

Making Copies

Loading Paper

LCT

Tray 1/2/3/4

Press [Basic], and then specify
the desired settings.

Press [Original Setting], and then
specify the desired settings.

Press [Original Type], and then
specify the desired settings.