Kenwood KDC-4057UR, KDC-317UR, KDC-3357UY, KDC-4057UB Manual [ru]

KDC-4557U KDC-4057UB KDC-4057UR KDC-3457UQ

KDC-3357UY KDC-3057URY KDC-3257URY KDC-317UR KDC-3057UG

KDC-3057UR

CD-RECEIVER

INSTRUCTION MANUAL

CD-RECEIVER

BEDIENUNGSANLEITUNG

CD-PECИBEP

ИHCTPУKЦИЯ ПO ЭKCПЛУATAЦИИ

CD-РЕСІВЕР

ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ

Изделие изготовлено в Индонезии

© 2012 JVC KENWOOD Corporation

GET0848-001A (E0/E20)

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste.

Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts.

Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment.

Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.

Entsorgung von gebrauchten elektrischen und elektronischen Geräten und Batterien (anzuwenden in den Ländern der Europäischen Union und anderen europäischen Ländern mit einem separaten Sammelsystem für solche Geräte)

Das Symbol (durchgestrichene Mülltonne) auf dem Produkt oder seiner Verpackung weist darauf hin, dass dieses Produkt nicht als normaler Haushaltsabfall behandelt werden darf, sondern an einer Annahmestelle für das Recycling von elektrischen und elektronischen Geräten und batterien abgegeben werden muss.

Durch Ihren Beitrag zur korrekten Entsorgung dieses Produktes schützen Sie die Umwelt und die Gesundheit Ihrer Mitmenschen.

Unsachgemässe oder falsche Entsorgung gefährden Umwelt und Gesundheit. Weitere Informationen über das Recycling dieses Produktes erhalten Sie von Ihrer Gemeinde oder den kommunalen Entsorgungsbetrieben.

Achtung: Das Zeichen „Pb“ unter dem Symbol fur Batterien zeigt an, dass diese Batterie Blei enthalt.

Declaration of Conformity with regard to the EMC Directive 2004/108/EC Manufacturer:

JVC KENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

EU Representative’s:

Kenwood Electronics Europe BV

Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

Konformitätserklärung in Bezug auf die EMC-Vorschrift 2004/108/EC Hersteller:

JVC KENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

EU-Vertreter:

Kenwood Electronics Europe BV

Amsterdamseweg 37, 1422 AC UITHOORN, Niederlande

This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State.

Dieses Produkt wird weder vom Hersteller eines Fahrzeugs während der Produktion noch von einem professionellen Importeur eines Fahrzeugs in einen EUMitgliedsstaat eingebaut.

i

The marking of products using lasers

The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.

Kennzeichnung von Geräten mit Laser-Abtastern

Das Etikett ist am Chassis/Gehäuse angebracht und besagt, dass sich die Komponente Laserstrahlen bedient, die als Laserstrahlen der Klasse 1 klassifiziert wurden. Dies weist darauf hin, dass sich das Gerät Laserstrahlen bedient, die einer schwächeren Klasse angehören. Das bedeutet, dass durch den sehr schwachen Laserstrahl keine Gefahr durch gefährliche Strahlungen außerhalb des Geräts besteht.

Маркировка изделий, использующих лазеры

К корпусу устройства прикреплена табличка, указывающая, что устройство использует лазерные лучи класса 1. Это означает, что в устройстве используются лазерные лучи слабой интенсивности. Они не представляют опасности и не распространяют опасную радиацию вне устройства.

Маркування виробів, обладнаних лазером

На каркас/корпус поміщається наклейка, в якій зазначається, що даний виріб випромінюєє лазерні промені Класу 1. Це означає, що даний апарат використовує лазерні промені слабшого класу. За межами даного апарату не існує небезпеки лазерного випромінювання.

При Правильном соблюдении всех условий эксплуатации и техническких требований, указанных в данной инструкций, срок службы купленного Baм изделия составляет 7 лет. Гарантийный срок эксплуатации изделия соответевует сpоку, указанному в гaрантийном талоне. В период срока службы эксплуатация и хранение изделия не может представлять oпасность для Вашей жизни, здоровья, причинять вред Вашему имуществу или окружающей срeде.

Декларація про Відповідність Вимогам Технічного Регламенту Обмеження Використання деяких Небезпечних Речовин в електричному та електронному обладнанні (затвердженого Постановою №1057 Кабінету Міністрів України)

Виріб відповідає вимогам Технічного Регламенту Обмеження Використання деяких Небезпечних Речовин в електричному та електронному обладнанні (ТР ОВНР).

Вміст небезпечних речовин у випадках, не обумовлених в Додатку №2 ТР ОВНР:

1.свинець(Pb) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон;

2.кадмій (Cd)– не перевищує 0.01 % ваги речовини або в концентрації до 100 частин на мільйон;

3.ртуть(Hg) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон;

4.шестивалентний хром (Cr 6+) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон;

5.полібромбіфеноли (PBB) – не перевищує 0.1% ваги речовини або в концентрації до 1000 частин на мільйон;

6.полібромдефенілові ефіри (PBDE) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон.

For Turkey

Bu ürün 28300 sayılı Resmi Gazete’de yayımlanan Atik Elektrikli ve Elektronik Eşyalarin Kontrolü Yönetmeliğe uygun olarak üretilmiştir.

Eski Elektrik ve Elektronik Ekipmanların İmha Edilmesi Hakkında Bilgi (ayrı atık toplama sistemlerini kullanan ülkeleri için uygulanabilir)

Sembollü (üzerinde çarpı işareti olan çöp kutusu) ürünler ev atıkları olarak atılamaz.

Eski elektrik ve elektronik ekipmanlar, bu ürünleri ve ürün atıklarını geri dönüştürebilecek bir tesiste değerlendirilmelidir. Yaşadığınız bölgeye en yakın geri dönüşüm tesisinin yerini öğrenmek için yerel makamlara müracaat edin. Uygun geri dönüşüm ve atık imha yöntemi sağlığımız ve çevremiz üzerindeki zararlı etkileri önlerken kaynakların korunmasına da yardımcı olacaktır.

ii

CONTENTS

BEFORE USE	2
BASICS	3
GETTING STARTED	4
RADIO	5
CD / USB / iPod	6
AUX	7
AUDIO SETTINGS	8
DISPLAY SETTINGS	9
MORE INFORMATION	9
TROUBLESHOOTING	10
SPECIFICATIONS	11
INSTALLATION / CONNECTION	12

How to read this manual

•Operations explained mainly using buttons on the faceplate.

•[XX] indicates the selected items.

•( XX) indicates references are available on the stated page number.

BEFORE USE

Warning

Do not operate any function that takes your attention away from safe driving.

Caution

Volume setting:

•Adjust the volume so that you can hear sounds outside the car to prevent accident.

•Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.

General:

•Avoid using the USB device or iPod/iPhone if it might hinder driving safety.

•Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.

•Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short circuit.

•If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate.

Remote control (RC-406):

•Do not leave the remote control in hot places such as on the dashboard.

•The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or equivalent type.

•The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

•Keep battery out of reach of children and in original package until ready to use. Dispose of used batteries promptly. If swallowed, contact a physician immediately.

Maintenance

Cleaning the unit: Wipe off dirt on the faceplate with a dry silicon or soft cloth.

Cleaning the connector: Detach the faceplate and clean the connector with a cotton swab gently, being careful not to damage the connector.

Handling discs:

•Do not touch the recording surface of the disc.

•Do not stick tape etc. on the disc, or use a disc with tape stuck on it.

•Do not use any accessories for the disc.

•Clean from the center of the disc and move outward.

•Clean the disc with a dry silicon or soft cloth. Do not use any solvents.

•When removing discs from this unit, pull them out horizontally.

•Remove burrs from the center hole and disc edge before inserting a disc.

Connector (on the reverse side of the faceplate)

2

BASICS

Faceplate

Volume knob
(turn/press)	Loading slot

	Detach	KDC-4557U KDC-4057UB
	button
		KDC-4057UR

KDC-3457UQKDC-3357UY

KDC-3257URYKDC-3057UG

KDC-3057URKDC-3057URY

KDC-317UR

To	Do this (on the faceplate)
Turn on the power	Press L SRC.
	• Press and hold to turn off the power.

Attach

Detach

How to reset

Your preset adjustments will also be erased.

Remote control (RC-406)

(supplied for KDC-3357UY )

Remote sensor (Do not expose to bright sunlight.)

	Pull out the
* Not used.	insulation sheet
	when using for
	the first time.

How to replace the battery

Do this (on the remote control)

Press and hold SRC to turn off the power.

( Pressing SRC does not turn on the power. )

	Adjust the volume	Turn the volume knob.	Press VOL or VOL .
			Press ATT during playback to attenuate the sound.
			• Press again to cancel.
	Select a source	Press L SRC repeatedly.	Press SRC repeatedly.
	Change the display	Press SCRL DISP repeatedly.	( not available )
	information	• Press and hold to scroll the current display information.

ENGLISH | 3

GETTING STARTED

1Cancel the demonstration

When you turn on the power (or after you reset the unit), the display shows: “CANCEL DEMO” \ “PRESS” \ “VOLUME KNOB”

1Press the volume knob.

[YES] is selected for the initial setup.

2Press the volume knob again.

“DEMO OFF” appears.

2

Set the clock

1 Press the volume knob to enter [FUNCTION].

2 Turn the volume knob to select [SETTINGS], then press the knob. 3 Turn the volume knob to select [CLOCK], then press the knob.

4 Press the volume knob to select [CLOCK ADJ].

5 Turn the volume knob to adjust the hour, then press the knob.

6Turn the volume knob to adjust the minute, then press the knob.

Press 4 / ¢ to move between the hour and minute adjustment.

7Press and hold to exit. (or)

Press and hold SCRL DISP to enter clock adjustment mode directly while in clock display screen.

Then, perform steps 5 and 6 above to set the clock.

3Set the initial settings

1 Press SRC to enter [STANDBY].

2 Press the volume knob to enter [FUNCTION].

3 Turn the volume knob to select [INITIAL SET], then press the knob.

4Turn the volume knob to make a selection (see the table below), then press the knob.

5Press and hold to exit.

•To return to the previous hierarchy, press .

		Default: XX
PRESET TYPE		NORM: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/
		MW/ LW). ; MIX: Memorizes one station for each preset button regardless of the
		selected band.
KEY BEEP		ON: Activates the keypress tone. ; OFF: Deactivates.
RUSSIAN SET		ON: Folder name, file name, song title, artist name, album name are displayed in
		Russian (if applicable). ; OFF: Cancels.
P-OFF WAIT		Applicable only when the demonstration mode is turned off.
		Sets the duration when the unit will automatically turns off (while in standby mode)
		to save the battery.
		–––: Cancels ; 20M: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes
BUILTIN AUX		ON: Enables AUX in source selection. ; OFF: Disables. ( 7)
CD READ		1: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play
		as a music CD. No sound can be heard if an audio file disc is played.
SWITCH PRE		REAR/ SUB-W: Selects whether rear speakers or a subwoofer are connected to the
		line out terminals on the rear (through an external amplifier).
SP SELECT		OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches or
		4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum performance.
F/W UPDATE
	F/W UP xx.xx	YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated).
		For details on how to update the firmware, see: www.kenwood.com/cs/ce/

4

RADIO

Search for a station

1 Press L SRC to select TUNER.

2Press repeatedly (or press *AM– / #FM+ on RC-406) to select FM1/ FM2/ FM3/ MW/ LW.

3 Press 4 / ¢ to search for a station.

•To store a station: Press and hold one of the number buttons (1 to 6).

•To select a stored station: Press one of the number buttons (1 to 6)

Direct Access Tuning (using RC-406) (for KDC-3357UY )

1 Press *AM– / #FM+ to select a band.

2Press DIRECT to enter Direct Access Tuning.

“– – – • –” (for FM) or “– – – –” (for MW/ LW) appears on the display.

3 Press the number buttons to enter a frequency. 4 Press 4 / ¢ (+) to search for a frequency.

•To cancel, press .

•If no operation is done for 10 seconds after step 3, Direct Access Tuning is automatically canceled.

Other settings

1 Press the volume knob to enter [FUNCTION].

2 Turn the volume knob to select [SETTINGS], then press the knob.

3Turn the volume knob to make a selection (see the table on the right), then press the knob.

4 Press and hold to exit.

		Default: XX
LOCAL SEEK		ON: Searches only FM stations with good reception. ; OFF: Cancels.
SEEK MODE		Selects the tuning method for the 4 / ¢ buttons.
		AUTO1: Automatically searches for a station. ; AUTO2: Searches for a preset station. ;
		MANUAL: Manually search for a station.
AUTO		YES: Automatically starts memorizing 6 stations with good reception. ; NO: Cancels.
MEMORY		(Selectable only if [NORM] is selected for [PRESET TYPE].) ( 4)
MONO SET		ON: Improves the FM reception, but the stereo effect may be lost. ; OFF: Cancels.
PTY SEARCH		Press the volume knob to enter PTY language selection. Turn the volume knob to select the
		PTY language (ENGLISH/ FRENCH/ GERMAN), then press the knob.
		Selects the available Program Type (see below), then, press 4 / ¢ to start.
TI		ON: Allows the unit to temporarily switch to Traffic Information. ; OFF: Cancels.
NEWS SET		00M – 90M: Sets the time for receiving the next news bulletin. ; OFF: Cancels.
AF SET		ON: Automatically searches for another station broadcasting the same program in the
		same Radio Data System network with better reception when the current reception is
		poor. ; OFF: Cancels.
REGIONAL		ON: Switches to another station only in the specific region using the “AF” control. ;
		OFF: Cancels.
ATP SEEK		ON: Automatically searches for a station with better reception when the traffic
		information’s reception is poor. ; OFF: Cancels.
CLOCK
	TIME SYNC	ON: Synchronizes the unit’s time to the Radio Data System station time. ; OFF: Cancels.

TUNER SET: Selectable only when the source is not TUNER.

TI/ NEWS SET/ AF SET/ REGIONAL/ ATP SEEK: (For details, refer to the table above.)

•[LOCAL SEEK]/ [MONO SET]/ [PTY SEARCH]/ [TI]/ [NEWS SET]/ [AF SET]/ [REGIONAL]/ [ATP SEEK] is selectable only when the source is FM.

•Available Program Type:

SPEECH: NEWS, AFFAIRS, INFO (information), SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, DOCUMENT

MUSIC: POP M (music), ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS, OTHER M (music), JAZZ, COUNTRY, NATION M (music), OLDIES, FOLK M (music)

The unit will search for the Program Type categorized under [SPEECH] or [MUSIC] if selected.

•If the volume is adjusted during reception of traffic information, alarm or news bulletin, the adjusted volume is memorized automatically. It will be applied the next time traffic information, alarm or news bulletin function is turned on.

ENGLISH | 5

CD / USB / iPod

Start playback

CD	Label side	0: Eject disc

The source changes to CD and playback starts.

USB

USB input terminal

CA-U1EX (max.: 500 mA) (optional accessory)

The source changes to USB and playback starts.

iPod/iPhone (for KDC-4557U /

KDC-4057UB / KDC-4057UR )

USB input terminal

KCA-iP102 (optional accessory)

The source changes to iPod and playback starts.

Press and hold iPod to select the control mode while in iPod source.

MODE ON: From the iPod*1. MODE OFF: From the unit.

*1 You can still control play/pause, file selection, fast-forward or reverse files from the unit.

	KDC-4557U
	KDC-4057UB								: Applicable
	KDC-4057UR
									— : Not applicable
To				Do this					CD USB	iPod
Pause or resume				Press 6 38 (or ENT 38 on RC-406).
playback
Select a track/file				Press 4 / ¢ (or 4 / ¢ (+) on RC-406).
Select a folder				Press 1 – / 2 + (or *AM– / #FM+ on RC-406).					*2	—
Reverse/Fast-forward				Press and hold 4 / ¢ (or 4 / ¢ (+) on RC-406).
Select a track/file				1Press .
from a list				2Turn the volume knob to make a selection, then press the knob.

•AAC/MP3/WMA file: Select the desired folder, then a file.

•iPod or KENWOOD Music Editor Light (KME Light)/ KENWOOD Music

Control (KMC) file*4: Select the desired file from the list (PLAYLISTS,	*3
ARTISTS, ALBUMS, SONGS, PODCASTS*5, GENRES, COMPOSERS*5).

•To return to the root folder (or first file), press number button 5.

•To return to the previous hierarchy, press.

•To cancel, press and hold.

	• To skip songs at a specific ratio, press 4 / ¢. ( 7)		—	*4	*3
Repeat play	Press 4	repeatedly.
	• Audio CD: TRAC REPEAT, REPEAT OFF				*3
	• AAC/MP3/WMA file: FILE REPEAT, FOLD REPEAT, REPEAT OFF
	• iPod or KME Light/ KMC file: FILE REPEAT, REPEAT OFF
Random play	Press 3	or repeatedly.
	• Audio CD: DISC RANDOM, RANDOM OFF				*3
	• AAC/MP3/WMA/iPod or KME Light/ KMC file: FOLD RANDOM,
	RANDOM OFF
	Press and hold 3 or to select “ALL RANDOM.”		*2		*3

*2	Only for AAC/MP3/WMA files.	*4	Only for files registered in the database created with KME Light/
*3	Applicable only when [MODE OFF] is selected.	*5	KMC. ( 9)
			Only for iPod.

6

CD / USB / iPod

Direct Music Search (using RC-406)

(for KDC-3357UY )

1 Press DIRECT.

2Press the number buttons to enter a track/file number.

3 Press 4 / ¢ (+) to search for music.

•To cancel, press .

•Not available if Random Play is selected.

•Not applicable for iPod, KME Light/ KMC file. ( 9)

Select a song by name

(for KDC-4557U / KDC-4057UB / KDC-4057UR )

While listening to iPod...

1 Press .

2Turn the volume knob to select a category, then press the knob.

3 Press again.

4Turn the volume knob to select the character to be searched for.

5Press 4 / ¢ to move to the entry position.

You can enter up to three characters.

6 Press the volume knob to start searching.

7Turn the volume knob to make a selection, then press the knob.

Repeat step 7 until the desired item is selected.

•To search for a character other than A to Z and 0 to 9, enter only “*”.

•To return to the previous hierarchy, press .

•To return to the top menu, press number button 5.

•To cancel, press and hold .

Set the skip ratio

While listening to iPod (for KDC-4557U /

KDC-4057UB / KDC-4057UR ) or KME Light/ KMC

file...

1 Press the volume knob to enter [FUNCTION].

2Turn the volume knob to select [SETTINGS], then press the knob.

3Turn the volume knob to select [SKIP SEARCH], then press the knob.

4Turn the volume knob to make a selection, then press the knob.

0.5% (default)/ 1%/ 5%/ 10%: Sets the skip ratio when searching for a song.

(Holding 4 / ¢ skips songs at 10% regardless of the setting made.)

5 Press and hold to exit.

Muting upon the reception of a phone call

Connect the MUTE wire to your telephone using a commercial telephone accessory. ( 13)

When a call comes in, “CALL” appears.

•The audio system pauses.

•To continue listening to the audio system during a call, press SRC. “CALL” disappears and the audio system resumes.

When the call ends, “CALL” disappears.

• The audio system resumes.

AUX

Preparation:

Select [ON] for [BUILTIN AUX]. ( 4)

Start listening

1Connect a portable audio player (commercially available).

Auxiliary input jack

Portable audio player

3.5 mm stereo mini plug with “L” shaped connector (commercially available)

2 Press SRC to select AUX.

3Turn on the portable audio player and start playback.

Set the AUX name

While listening to AUX...

1 Press the volume knob to enter [FUNCTION].

2Turn the volume knob to select [SETTINGS], then press the knob.

3Turn the volume knob to select [AUX NAME], then press the knob.

4Turn the volume knob to make a selection, then press the knob.

AUX (default)/ DVD/ PORTABLE/ GAME/ VIDEO/ TV

5 Press and hold to exit.

ENGLISH | 7

AUDIO SETTINGS

While listening to any source...

1 Press the volume knob to enter [FUNCTION].

2 Turn the volume knob to select [AUDIO CTRL], then press the knob.

3Turn the volume knob to make a selection (see the table below), then press the knob.

Repeat step 3 until the desired item is selected or activated.

4 Press and hold to exit.

• To return to the previous hierarchy, press .

Default: XX

	SUB-W LEVEL		–15 to +15 (0):	Adjusts the subwoofer output level.
	BASS LEVEL		–8 to +8 (0):
				Adjusts the level to memorize for each source. (Before making
	MID LEVEL		–8 to +8 (0):
				an adjustment, select the source you want to adjust.)
	TRE LEVEL		–8 to +8 (0):
	EQ PRO
		BASS ADJUST	BASS C FRQ	60/ 80/ 100/ 200: Selects the center frequency.
			BASS LEVEL	–8 to +8 (0): Adjusts the level.
			BASS Q FCTR	1.00/ 1.25/ 1.50/ 2.00: Adjusts the quality factor.
			BASS EXTEND	ON: Turns on the extended bass. ; OFF: Cancels.
		MID ADJUST	MID C FRQ	0.5K/ 1.0K/ 1.5K/ 2.5K: Selects the center frequency.
			MID LEVEL	–8 to +8 (0): Adjusts the level.
			MID Q FCTR	0.75/ 1.00/ 1.25: Adjusts the quality factor.
		TRE ADJUST	TRE C FRQ	10.0K/ 12.5K/ 15.0K/ 17.5K: Selects the center frequency.
			TRE LEVEL	–8 to +8 (0): Adjusts the level.
	PRESET EQ		NATURAL/ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL: Selects
			a preset equalizer suitable to the music genre. (Select [USER] to use the
			customized bass, middle, and treble settings.)
	BASS BOOST		B.BOOST LV1/ B.BOOST LV2/ B.BOOST LV3: Selects your preferred bass boost
			level. ; OFF: Cancels.

LOUDNESS		LOUD LV1/ LOUD LV2: Selects your preferred low and high frequencies boost
		to produce a well-balanced sound at a low volume level. ; OFF: Cancels.
BALANCE		L15 to R15 (0): Adjusts the left and right speaker output balance.
FADER		R15 to F15 (0): Adjusts the rear and front speaker output balance.
SUB-W SET		ON: Turns on the subwoofer output. ; OFF: Cancels.
DETAIL SET
	LPF SUB-W	THROUGH: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/
		160HZ: Audio signals with frequencies lower than 85 Hz/ 120 Hz/ 160 Hz are
		sent to the subwoofer.
	SUB-W PHASE	REV (180°)/ NORM (0°): Selects the phase of the subwoofer output to be in
		line with the speaker output for optimum performance. (Selectable only if a
		setting other than [THROUGH] is selected for [LPF SUB-W].)
	SUPREME SET	ON: Creates realistic sound by interpolating the high-frequency components
		that are lost in AAC/MP3/WMA audio compression. ; OFF: Cancels. (Selectable
		only when playing back an AAC/MP3/WMA disc or a USB device, except
		iPhone/iPod.)
	VOL OFFSET	–8 to +8 (for AUX) ; –8 to 0 (for other sources): Presets the volume
	(Default: 0)	adjustment level of each source. (Before adjustment, select the source you
		want to adjust.)

•[SUB-W LEVEL]/ [SUB-W SET]/ [LPF SUB-W]/ [SUB-W PHASE] is selectable only if [SWITCH PRE] is set to [SUB-W]. ( 4)

•[SUB-W LEVEL]/ [LPF SUB-W]/ [SUB-W PHASE] is selectable only if [SUB-W SET] is set to [ON].

8

DISPLAY SETTINGS

1 Press the volume knob to enter [FUNCTION].

2 Turn the volume knob to select [SETTINGS], then press the knob.

3Turn the volume knob to make a selection (see the table below), then press the knob.

Repeat step 3 until the desired item is selected or activated.

4 Press and hold to exit.

• To return to the previous hierarchy, press .

								Default: XX
DISP & KEY (for					)
		KDC-4557U
	COLOR SEL		VARI SCAN/ COLOR 01 — COLOR 24/ USER: Selects your preferred key
			illumination color.
			You can create your own color (when [COLOR 01] — [COLOR 24] or [USER]
			is selected). The color you have created can be selected when you select
			[USER].
			1 Press and hold the volume knob to enter the detailed color adjustment.
			2 Press 4 / ¢ to select the color (R/ G/ B) to adjust.
			3 Turn the volume knob to adjust the level (0 — 9), then press the knob.
	DISP DIMMER		ON: Dims the display illumination. ; OFF: Cancels.
	TEXT SCROLL		AUTO/ ONCE: Selects whether to scroll the display information automatically,
			or scroll only once. ; OFF: Cancels.
	KEY DIMMER		DIMMER LV1: Dims the key illumination. ; DIMMER LV2: Dims the key
			illumination darker than DIMMER LV1. ; DIMMER OFF: Cancels.
DISPLAY
	COLOR SEL		For			/		:
				KDC-3457UQ			KDC-3357UY
			RED/ GREEN: Selects your preferred display and key illumination color.
	DISP DIMMER		ON: Dims the display illumination. ; OFF: Cancels.
	TEXT SCROLL		AUTO/ ONCE: Selects whether to scroll the display information automatically,
			or scroll only once. ; OFF: Cancels.

MORE INFORMATION

General

•This unit can only play the following CDs:

•Detailed information and notes about the playable audio files are stated in an online manual on the following site: www.kenwood.com/cs/ce/audiofile/

Playable files

•Playable Audio file: AAC (.m4a), MP3 (.mp3), WMA (.wma)

•Playable disc media: CD-R/RW/ROM

•Playable disc file formats: ISO 9660 Level 1/2, Joliet, Romeo, Long file name.

•Playable USB device file system: FAT16, FAT32 Although the audio files are complied with

the standards listed above, playback maybe impossible depending on the types or conditions of media or device.

Unplayable discs

•Discs that are not round.

•Discs with coloring on the recording surface or discs that are dirty.

•Recordable/ReWritable discs that have not been finalized.

•8 cm CD. Attempting to insert using an adapter may cause malfunction.

About USB devices

•This unit can play AAC/MP3/WMA files stored on a USB mass storage class device.

•You cannot connect a USB device via a USB hub and Multi Card Reader.

•Connecting a cable whose total length is longer than 5 m may result in abnormal playback.

•This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1 A.

About iPod/iPhone

Made for

-iPod touch (1st, 2nd, 3rd, and 4th generation)

-iPod classic

-iPod with video

-iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th generation)

-iPhone, iPhone 3G, 3GS, 4, 4S

•For the latest compatible list and software versions of iPhone/iPod, see: www.kenwood. com/cs/ce/ipod

•If you start playback after connecting the iPod, the music that has been played by the iPod is played first.

In this case, “RESUMING” is displayed without displaying a folder name, etc. Changing the browse item will display the correct title, etc.

•You cannot operate iPod if “KENWOOD” or “” is displayed on iPod.

About “KENWOOD Music Editor

Light” and “KENWOOD Music

Control”

•This unit supports the PC application “KENWOOD Music Editor Light” and Android™ application “KENWOOD Music Control.”

•When you use an audio file with database information added using the “KENWOOD Music Editor Light” or “KENWOOD Music Control,” you can search for a file by title, album or artist name using Music Search.

•“KENWOOD Music Editor Light” and “KENWOOD Music Control” are available from the following web site: www.kenwood.com/cs/ce/

ENGLISH | 9

TROUBLESHOOTING

Symptom		Remedy
Sound cannot be heard.	•	Adjust the volume to the optimum level.
	•	Check the cords and connections.
“PROTECT” appears and no		Check to be sure the terminals of the speaker wires are
operations can be done.		insulated properly, then reset the unit. If this does not solve the
		problem, consult your nearest service center.
• Sound cannot be heard.		Clean the connectors. ( 2)
• The unit does not turn on.
• Information shown on the
display is incorrect.
The unit does not work at all.		Reset the unit. ( 3)
• Radio reception is poor.	•	Connect the antenna firmly.
• Static noise while listening to	•	Pull the antenna out all the way.
the radio.
“NA FILE” appears.		Make sure the disc contains supported audio files. ( 9)
“NO DISC” appears.		Insert a playable disc into the loading slot.
“TOC ERROR” appears.		Make sure the disc is clean and inserted properly.
“PLS EJECT” appears.		Reset the unit. If this does not solve the problem, consult your
		nearest service center.
Disc cannot be ejected.		Press and hold 0 to forcibly eject the disc. Be careful not
		to drop the disc when it is ejected. If this does not solve the
		problem, reset the unit. ( 3)
“READ ERROR” appears.		Copy the files and folders onto the USB device again. If this does
		not solve the problem, reset the USB device or use another USB
		device.
“NO DEVICE” appears.		Connect a USB device, and change the source to USB again.
“COPY PRO” appears.		A copy-protected file is played.
“NO MUSIC” appears.		Connect a USB device that contains playable audio files.
“NA DEVICE” appears.		Connect a supported USB device, and check the connections.

Symptom		Remedy
“USB ERROR” appears.	•	Remove the USB device, turn the unit off, then turn it on
		again.
	•	Try to connect another USB device.
“iPod ERROR” appears.	•	Reconnect the iPod.
	•	Reset the iPod.
Noise is generated.		Skip to another track or change the disc.
Tracks do not play back as you		Playback order is determined when files are recorded.
have intended them to play.
“READING” keeps flashing.		Do not use too many hierarchical levels or folders.
Elapsed playing time is not correct.		This is caused by how the tracks are recorded.
The number of songs contained in		Podcast files are not counted on this unit as this unit does
the “SONGS” category of this unit		not support the playback of podcast files.
is different from the iPod/iPhone.
Correct characters are not		This unit can only display uppercase letters, numbers, and
displayed (e.g. album name).		a limited number of symbols. Uppercase Cyrillic letters can
		also be displayed if [RUSSIAN SET] is set to [ON]. ( 4)

10

SPECIFICATIONS

FM

Frequency Range

For

/

/

KDC-4557U

KDC-4057UB

/

/

KDC-4057UR

KDC-3357UY

/

/

KDC-3257URY

KDC-3057UG

/

KDC-3057UR

/

KDC-3057URY

:

KDC-317UR

FM1/ FM2/ FM3: 87.5 MHz to 108 MHz

(50 kHz space)

For

:

KDC-3457UQ

FM1/ FM2: 87.5 MHz to 108.0 MHz (50 kHz space)

Tuner

FM3: 65.00 MHz to 74.00 MHz (30 kHz space)

Usable Sensitivity (S/N = 26 dB)

1.0 μV/75 Ω

Quieting Sensitivity

2.5 μV/75 Ω

(DIN S/N = 46 dB)

Frequency Response (±3 dB)

30 Hz to 15 kHz

Signal-to-Noise Ratio (MONO)

63 dB

Stereo Separation (1 kHz)

40 dB

MW

Frequency Range

531 kHz to 1 611 kHz (9 kHz space)

Usable Sensitivity (S/N = 20 dB)

36 μV

LW

Frequency Range

153 kHz to 279 kHz (9 kHz space)

Usable Sensitivity (S/N = 20 dB)

57 μV

Laser Diode

GaAIAs

Digital Filter (D/A)

8 times over sampling

D/A Converter

24 Bit

Spindle Speed

500 rpm to 200 rpm (CLV)

player

Wow & Flutter

Below measurable limit

Frequency Response (±1 dB)

20 Hz to 20 kHz

CD

Total Harmonic Distortion (1 kHz)

0.01 %

Signal-to-Noise Ratio (1 kHz)

105 dB

Dynamic Range

90 dB

AAC Decode

AAC-LC “.m4a” files

MP3 Decode

Compliant with MPEG-1/2 Audio Layer-3

WMA Decode

Compliant with Windows Media Audio

		USB Standard	USB 1.1, USB 2.0 (Full speed)
		Maximum Supply Current	DC 5 V			1 A
	USB	File System	FAT16/ 32
		AAC Decode	AAC-LC “.m4a” files
		MP3 Decode	Compliant with MPEG-1/2 Audio Layer-3
		WMA Decode	Compliant with Windows Media Audio
		Maximum Output Power	50 W × 4
		Output Power (DIN 45324, +B = 14.4 V)	30 W × 4
		Speaker Impedance	4 Ω to 8 Ω
	Audio	Tone Action	Middle			1 kHz ±8 dB
			Bass			100 Hz ±8 dB
			Treble			12.5 kHz ±8 dB
		Preout Level / Load (CD)	2 500 mV/10 kΩ
		Preout Impedance	≤ 600 Ω
	Auxiliary	Frequency Response (±3 dB)	20 Hz to 20 kHz
		Input Maximum Voltage	1 200 mV
		Input Impedance	10 kΩ
	General	Operating Voltage	14.4 V (11 V to 16 V allowable)
		Maximum Current Consumption	10 A
		Installation Size (W × H × D)	182 mm × 53 mm × 160 mm
		Weight	1.2 kg

Subject to change without notice.

ENGLISH | 11

INSTALLATION / CONNECTION

Warning

•The unit can only be used with a 12 V DC power supply, negative ground.

•Disconnect the battery’s negative terminal before wiring and mounting.

•Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire (black) to prevent a short circuit.

•Insulate unconnected wires with vinyl tape to prevent a short circuit.

•Be sure to ground this unit to the car’s chassis again after installation.

Caution

•For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer.

•Install this unit in the console of your vehicle. Do not touch the metal parts of this unit during and shortly after use of the unit. Metal parts such as the heat sink and enclosure become hot.

•Do not connect the · wires of speaker to the car chassis, Ground wire (black), or in parallel.

•Mount the unit with the angle of 30º or less.

•If your vehicle wiring harness does not have the ignition terminal, connect Ignition wire (red) to the terminal on the vehicle’s fuse box which provides 12 V DC power supply and is turned on and off by the ignition key.

•After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly.

•If the fuse blows, first make sure the wires are not touching car’s chassis, then replace the old fuse with one that has the same rating.

Basic procedure

1Remove the key from the ignition switch, then disconnect the · terminal of the car battery.

2Connect the wires properly.

See Wiring connection. ( 13)

3Install the unit to your car.

See Installing the unit (in-dash mounting).

4 Connect the · terminal of the car battery.

5 Reset the unit. ( 3)

Installating the unit (in-dash mounting)

Do the required wiring. ( 13)

Make sure the direction

of the trim plate. The shape of the hooks

on the top side is as illustrated.

Dashboard of your car

Bend the appropriate tabs to hold the mounting sleeve firmly in place.

How to remove the unit

1 Detach the faceplate.

2 Fit the catch pin on the extraction keys into the holes on both sides of the trim plate, then pull it out.

3Insert the extraction keys deeply into the slots on each side, then follow the arrows as shown on the right.

12

Wiring connection

KDC-4557UKDC-3057UG KDC-4057UBKDC-3057UR KDC-4057URKDC-3057URY KDC-3457UQKDC-317UR

REAR/SW

RL

Rear/subwoofer output

Antenna terminal

KDC-3357UY	R	L
KDC-3257URY	FRONT	Front output
	REAR/SW
		Rear/subwoofer output

Fuse (10 A)

If no connections are made, do not let the wire come out from the tab.

Light blue/yellow		STEERING WHEEL	(Except for KDC-3457UQ ):
		REMOTE INPUT
(Steering remote control wire)		REMOTE CONT	To the steering wheel remote control adapter
Blue/White		ANT CONT	To the power control terminal when using the optional power amplifier, or to the antenna
(Power control wire/ Antenna control wire)		P. CONT	control terminal in the vehicle.
Brown			To the terminal that is grounded when either the telephone rings or during conversation.
(Mute control wire)		MUTE	(To connect the Kenwood navigation system, consult your navigation manual.)
Yellow (Battery wire)	Connecting the ISO connectors on some VW/
	Audi or Opel (Vauxhall) automobiles
Red (Ignition wire)	You may need to modify the wiring of the
	supplied wiring harness as illustrated below.
				Pin		Color and function
	Ignition wire		A7 (Red)	A4	Yellow	: Battery
Red (A7)		(Red)		A5	Blue/White : Power control
Yellow (A4)	Unit		Vehicle	A7	Red	: Ignition (ACC)
				A8	Black	: Earth (ground) connection
	Battery wire		A4 (Yellow)	B1 / B2	Purple ª / Purple/black · : Rear speaker (right)
ISO connectors	(Yellow)			B3 / B4	Gray ª / Gray/black ·		: Front speaker (right)
		Default wiring		B5 / B6	White ª / White/black · : Front speaker (left)
				B7 / B8	Green ª / Green/black · : Rear speaker (left)

Part list for installation

A Faceplate

( ×1 )

B Mounting sleeve

( ×1 )

C Trim plate

( ×1 )

D Wiring harness

( ×1 )

E Extraction key

( ×2 )

ENGLISH | 13

Anschluss (an der Rückseite der Frontblende)

INHALT

VOR DER INBETRIEBNAHME	2
GRUNDLAGEN	3
ERSTE SCHRITTE	4
RADIO	5
CD / USB / iPod	6
AUX	7
AUDIOEINSTELLUNGEN	8
DISPLAY-EINSTELLUNGEN	9
WEITERE INFORMATIONEN	9
FEHLERSUCHE	10
TECHNISCHE DATEN	11
EINBAU / ANSCHLUSS	12

Wie Sie diese Anleitung lesen

•Die Bedienung wird im Wesentlichen anhand der Tasten auf der Frontblende erläutert.

•[XX] zeigt die gewählten Punkte an.

•( XX) zeigt an, das Bezugsinformationen auf der angegebenen Seitennummer vorhanden sind.

VOR DER INBETRIEBNAHME

Warnung

Bedienen Sie keine Funktion, die Ihre Aufmerksamkeit vom Straßenverkehr ablenkt.

Vorsicht

Lautstärkeeinstellung:

•Stellen Sie die Lautstärke so ein, dass Sie immer noch Geräusche von außerhalb des Fahrzeugs hören können, um Unfälle zu vermeiden.

•Senken Sie die Lautstärke vor dem Abspielen digitaler Tonquellen, um Beschädigung der Lautsprecher durch plötzliche Tonspitzen zu vermeiden.

Allgemeines:

•Vermeiden Sie Verwendung des USB-Geräts oder iPod/iPhone, wenn diese das sichere Fahren behindern können.

•Stellen Sie sicher, dass alle wichtigen Daten gesichert sind. Wir übernehmen keine Haftung für jeglichen Verlust aufgenommener Daten.

•Stellen Sie sicher, dass keine Metallgegenstände (wie etwa Münzen oder Werkzeuge) ins Innere des Geräts gelangen und Kurzschlüsse verursachen.

•Wenn ein Disc-Fehler durch Kondensationsbildung auf der Laserlinse auftritt, werfen Sie die Disc aus und warten Sie eine Zeit lang, bis die Kondensation getrocknet ist.

Fernbedienung (RC-406):

•Lassen Sie die Fernbedienung nicht an heißen Orten wie beispielsweise auf dem Armaturenbrett liegen.

•Es besteht die Gefahr, dass die Lithiumbatterie explodiert, wenn sie verkehrt eingesetzt wird. Ersetzen sie sie ausschließlich durch eine des gleichen oder eines gleichwertigen Typs.

•Akkus oder Batterien dürfen keiner großen Hitze, wie beispielsweise Sonneneinstrahlung, Feuer oder Ähnlichem, ausgesetzt werden.

•Bewahren Sie Batterien bis zur Verwendung außerhalb der Reichweite von Kindern und in der Originalverpackung auf. Entsorgen Sie gebrauchte Batterien umgehend. Bei Verschlucken der Batterie sofort einen Arzt aufsuchen.

Wartung

Reinigung des Geräts: Wischen Sie die Frontblende mit einem trockenen Silikonlappen oder weichen Lappen sauber.

Reinigung des Steckverbinders: Die Frontblende abnehmen und den Anschluss sanft mit einem Wattetupfer oder Lappen reinigen, wobei darauf geachtet werden

muss, die Anschlusskontakte nicht zu beschädigen.

Handhabung von Discs:

• Berühren Sie nicht die Aufnahme-Oberfläche der Disc.

• Kleben Sie keine Aufkleber oder ähnliches auf eine Disc. Verwenden Sie dem entsprechend auch keine Discs, auf denen sich bereits ein Aufkleber befindet.

•Verwenden Sie kein Zubehör für die Disc.

•Reinigen Sie CDs stets von der Mitte einer Disc nach außen hin.

•Reinigen Sie die Disc mit einem trockenen Silikonlappen oder weichen Lappen. Verwenden Sie keine Lösungsmittel.

•Ziehen Sie Discs beim Entfernen aus dem Gerät horizontal heraus.

•Entfernen Sie vor dem Einsetzen einer Disc die Grate vom Mittenloch und der Disc-Kante.

2