n1 24" width with (2) 22 NF batteries. Elevate systems require 22 NF batteries.
25.5" width with (2) Group 24 batteries or (3) 22 NF batteries.
n2 12" - 16" width available with Tilt only system, Recline and Tilt/Recline sizes range from
16" - 2 4" wide
.
n3 Elevate 16" - 24" backheight, curved ABS or Adjustable ASBA.
n4 Elevate only is 16.8" or Tilt/Recline/Elevate 18.5".
n5 315 lb. for Tilt only system. 325 lb. Recline only and 370 lb. for Tilt/Recline.
n6 Elevate Seat only.
11
Page 12
INVACARE
®
TDX®SR
Wheelchair
The Invacare
builds off of the proven Invacare® TDX®
SP platform and offers the benefits of
Invacare® Gearless Brushless GM™
TrueTrack motors. TrueTrack allows
the chair to maintain a more consistent
forward path with fewer veer corrections.
TrueTrack motors ultimately result in less
fatigue for those using alternative driver
controls, and those with impaired hand
function.
The TDX SR wheelchair offers the
same performance features of the
TDXSR (Group 4 Rehab Seat) K0868
TDXSRV (Group 4 Captain’s Seat) K0869
TDXSR-HD (Group 4 Rehab Seat Heavy-Duty) K0870
TDXSR-CG (Group 4 Single Power) K0877
TDXSR-CG-HD (Group 4 Single Power Heavy-Duty) K0879
TDXSR-MCG (Group 4 Multiple Power) K0884
TDXSR-MCG HD (Group 4 Multiple Power Heavy-Duty) K0886
12
TDX SP wheelchair including:
• Enhanced Invacare® SureStep®
Suspension
• Quiet Stability Lock
• Contemporary Aesthetics
• Wider Rear Caster Spacing
®
TDX® SR wheelchair
Page 13
Invacare® Gearless Brushless GB™ Motor.
Invacare® Gearless Brushless GB™ motors are not only
a key component of TrueTrack technology, , but the design
is also 75% efficient, resulting in 17% more battery
range than Invacare’s 4-pole motors. Battery range is
an important feature for active users and users requiring
powered seating systems.
TrueTrack Technology.
The patented TrueTrack technology features GB motors
and motor controller. This feature helps keep the power
wheelchair on a truer forward path – even on many
slopes, thresholds and uneven terrains. TrueTrack
minimizes the need for veer correction, diminishing
fatigue for joystick and switch drivers.
TrueTrack Technology is beneficial for the client for
the following reasons:
• As the power wheelchair holds a truer course, the
driver needs to make fewer course corrections.
This makes driving more efficient by reducing the
necessary amount of movement. Reducing the required
movement can increase overall speed (i.e. the client
may be able to move down a hallway faster, as less
compensatory movements are required), decrease
fatigue, and promote independence while driving,
because the chair is not pulled off course. This is
true for drivers using a proportional control as well
as a digital or non-proportional system.
• This feature is critical for clients who fatigue easily,
as less compensatory movements are required.
• This feature also is critical for clients who use a
non-proportional or digital access method (i.e. a
head array with proximity switches or pneumatic
sip-n-puff controls). Driving with switches can be
very tedious and inefficient. Making frequent course
corrections significantly increases the effort, time and
energy required. Fewer course corrections translates
to a more efficient driver.
13
Page 14
Invacare® TDX® SR Seating Options.
The TDX SR wheelchair is available with the
adjustable rehab seat, captain’s seating and the full
range of powered seating options. The Invacare®
™
Formula
7" of weight shift tilt, a low starting seat to floor
height of 17.5", numerous back type options and six
Powered Seating system offers up to
CG
combinations of tilt, recline and elevate including:
• Tilt only
• Recline only
• Elevating seat
• Tilt/Recline combination
• Tilt/Elevate combination
• Tilt/Recline/Elevate combination
The TDX SR wheelchair offers Smart Actuators
standard at no additional upcharge. Smart Actuators
allow the client to achieve a pre-set tilt, recline and
n1 90˚ front rigging.
n2 12"-16" width only available with tilt systems. All other powered seating systems start out at 16".
n3 16" and 18" wide set to 16", 17" or 18" depth. 20 " and 22"wide set to 18", 19" or 20" depth.
n2
n4
n5
n4. Elevate 16" - 24" backheight, curved ABS or Adjustable ASBA.
n5. Elevate only is 16.8" or Tilt/Recline Elevate is 18.5".
n6. 6.8 mph top speed with maximum weight capacity of 400 lb., 7.1 mph top speed with
* Manual center-mount. ** With 20" back height and zero degree seat angle.
4.8 mph 4.8 mph 4.8 mph
19" 19" 19"
21
Page 22
Invacare streamlines powered
seating platform.
Invacare has streamlined its five rehab powered
seating platforms down to one – Invacare®
Formula
FormulaCG system features up to 7" of weight-
shifting tilt upon center- and rear-wheel drive
platforms. To further leverage the features
and benefits of this seating system, we have
enhanced some key features of the product to
bring even more clinical benefits to our clients.
™
Powered Seating. The successful
CG
MPCTMT (Power Center Mount Foot Platform) K0108
MPCTMT-L (Power Center Mount Foot Platform long) K0108
22
Page 23
Redesigned Power Center Mount.
1. Mounting pulled back approximately 3" from
current design. At 90˚ the footboard folds up
flush to the front edge of the seat pan.
2. 6" articulation.
3. 75˚ elevation.
4. New Power Center Mount will be ideal for
all diagnoses, especially ALS clients who
conduct standing pivot transfers.
5. Updated mounting enhances safety
during transfers.
Suggested HCPCS code for the Power Center Mount is K0108.
Optional Adductors
1. Stealth™ adductors now available.
2. Available with either a 4"x4" or 4"x6" pad.
3. Features the Stealth link system for side rail
mounting and maximum pad positioning
options. Adductors flip down easily to
facilitate ease of transfers.
Footboard shown in
up position.
Footboard shown in
down position.
Suggested HCPCS code for the new adductors is
E0956 for the pads and E1028 for the hardware*.
*This information is not billing advice. Health care providers
are responsible for determining appropriate billing codes when
submitting claims. Please consult professional billing advisors
as needed to discuss specific care situations.
23
Page 24
Redesigned Manual Center Mount
1. To increase foot depth, upholstered
heel loops are replaced with
raised lips.
2. Center profile minimized providing
sleeker appearance.
3. Widened footplates with 3
fooplate size options. All with
non-slip footplate surface.
4. Optional calf pads with depth,
height and width adjustment.
5. Retrofitable.
CTMT-FJ Junior Center Mount Adjustable Knee Angle.
Cantilever Arms
CTMT-F Center Mount Adjustable Knee Angle.
CALF Calf Pads for Center Mount.
1. Armrest attached to the back
cane only and not attached to
the seat rail.
2. Provides the ability to easily flip
the armrest back for transferring.
3. Clears the back canes.
4. Option on Rehab Seat and
Power Tilt Seating Systems.
24
5. Weight rated for 300 lb.
6. Great for sliding board transfer.
7. Easy to use - provides great
stability for weight shifts.
CLVF Cantilever Full Length Arm.
CLVD Cantilever Desk Length Arm.
Also available in mixed lengths
Page 25
Redesigned Invacare® Contoura™ Back.
1. 3" of contoured depth.
2. Increased lateral positioning from
today’s current design. This gives
providers the ability to build up
lateral support with wedges.
3. Redundant tissue cut-outs at base.
4. Ability to add lumbar foam insert
for additional support. Invacare
continues to be the total custom
rehab solution for power bases,
powered seating and electronics.
3" of contoured depth.
Side bolster for lateral support.
CTB Contoura Back currently
pending PDAC approval for
HCPCS code E2620/E2621.
25
Page 26
Transport Ready Options.*
®
The Invacare
(TRRO) that includes four tie-down locations, a battery
securement system and a wheelchair-anchored pelvic belt.
The chairs with TRRO configuration have been crash-tested
in accordance with the ANSI/RESNA Vol. 1 Section 19.5.3
Frontal Impact Test (W/C 19).**
Invacare also offers the TRBKTS option. Unlike the TRRO
configuration, a chair with TRBKTS option does not have a
pelvic belt and it has not been crash-tested in accordance
with W/C 19 or any other standard. TRBKTS is intended to
secure an unoccupied wheelchair only.
These options reinforce Invacare’s market leadership in
transport-ready wheelchairs for consumers.
* As of this date, the U.S. Department of Transportation has not approved any
tie-down system for transportation of a user while in a wheelchair in a moving
vehicle of any type. Accordingly, Invacare recommends that wheelchair users
not be transported in vehicles of any kind while in wheelchairs and should be
transferred for transportation into appropriate seating in vehicles and use the
restraints made available by the auto industry.
** Please refer to the the following page of this literature for the required ANSI/RESNA
W/C19 sec. 6.2 Presale Literature Notication.
TDX® Family offers a transport ready option
Front transport bracket.
Rear transport bracket.
26
Page 27
ANSI/RESNA W/C 19 sec 6.2 Presale Literature
Notification – Invacare
®
TDX® SP Wheelchair
ANSI/RESNA W/C 19 sec 6.2 Presale Literature
Notification – Invacare® TDX SR Wheelchair
A. Minimum turning radius 23.6" with (2) 22NF batteries.
Minimum turning radius 24.4" with (2) Group 24 batteries.
Minimum turn-around width 43.7" with (2) 22NF batteries.
Minimum turn-around width 44.9" with (2) Group 24 batteries.
B. The TDX SP wheelchair with (2) 22NF batteries has a maximum
length of 35.25" (895 mm) and the TDX SP wheelchair with (2) Group
24 batteries has a maximum length of 35.63" (905 mm), meeting the
ADA definition of a common wheelchair and the maximum length
requirements of lifts on public vehicles.
C. Total wheelchair mass for TDX SP wheelchair with (2) 22NF
batteries = 280 lb. (127.3 kg) Adult and 286 lb. (130 kg) Junior
including front riggings, wheel locks, TRO brackets, wheelchairanchored pelvic belt and seating. Total wheelchair mass for TDX SP
Wheelchair with (2) Group 24 batteries = 315 lb. (142.9 kg) Adult and
317 lb. (143.8 kg) Junior including front riggings, wheel locks, TRO
brackets, wheelchair-anchored pelvic belt and seating.
D. Average lateral dummy displacement for TDX SP wheelchair with
(2) 22NF batteries = approximately .53" (13.4 mm) Adult and .57"
(14.4 mm) Junior.
Average lateral dummy displacement for TDX SP wheelchair with
(2) Group 24 batteries = approximately .54" (13.7 mm) Adult and .51"
(12.9 mm) Junior.
E. Overall Score for TDX SP wheelchair Adult with (2) 22NF
batteries = 18, Overall Rating = A
Overall Score for TDX SP wheelchair Junior with (2) 22NF
batteries = 14, Overall Rating = B
Overall Score for TDX SP wheelchair Adult with (2) Group 24
batteries = 17, Overall Rating = A
Overall Score for TDX SP wheelchair Junior with (2) Group 24
batteries = 14, Overall Rating = B
F. i. The TDX SP wheelchair tested was sized to accommodate a 168 lb.
test dummy (17" x 17" x 18" high and 14" Center-Wheel Drive tires.)
ii. The TDX SP wheelchair was tied down using four tie-down
brackets – 2 brackets located on the front of the base frame and
2 brackets located on the rear of the base frame.
iii. The TDX SP wheelchair was tested with a 168 lb. test dummy.
iv. The TDX SP wheelchair tested used a wheelchair-anchored pel-
vic belt and vehicle-anchored shoulder belt.
v. The TDX SP wheelchair tested complies with the performance
requirements of ANSI/RESNA W/C 19 sec. 5.3.
G. For all types of vehicles, the TDX SP wheelchair requires four
SAE J2249-compliant tie-down strap assemblies for effective
securement.
H. The TDX SP wheelchair provides a location for anchoring of an
Invacare-provided pelvic belt. This belt has been tested in
accordance with ANSI/RESNA W/C 19.
I. The wheelchair-anchored pelvic belt is supplied by Invacare.
A. Minimum turning radius 22.5" with (2) Group 24 batteries.
Minimum turn-around width 29" with (2) Group 24 batteries.
B. The TDX SR wheelchair with (2) Group 24 batteries has a maximum
length of 44" (1118 mm) and the maximum length requirements of
lifts on public vehicles.
C. Total wheelchair mass for TDX SR wheelchair with (2) Group 24
batteries = 347 lb. (158 kg) Adult.
D. Average lateral dummy displacement for TDX SR wheelchair
with (2) Group 24 batteries = approximately .53" (13.4 mm) Adult.
E. Overall Score for TDX SR wheelchair Adult with (2) Group 24
batteries = 18, Overall Rating = A
F. i. The TDX SR wheelchair tested was sized to accommodate a
168 lb. test dummy (17" x 17" x 22" high and 14" Center-Wheel
Drive tires).
ii. The TDX SR wheelchair was tied down using four tie-down
brackets – 2 brackets located on the front of the base frame and
2 brackets located on the rear of the base frame.
iii. The TDX SR wheelchair was tested with a 168 lb. test dummy.
iv. The TDX SR wheelchair tested used a wheelchair-anchored
pelvic belt and vehicle-anchored shoulder belt.
v. The TDX SR wheelchair tested complies with the performance
requirements of ANSI/RESNA W/C 19 sec. 5.3.
G. For all types of vehicles, the TDX SR wheelchair requires four
SAE J2249-compliant tie-down strap assemblies for effective
securement.
H. The TDX SR wheelchair provides a location for anchoring of an
Invacare-provided pelvic belt. This belt has been tested in
accordance with ANSI/RESNA W/C 19.
I. The wheelchair-anchored pelvic belt is supplied by Invacare.
Page 28
ANSI/RESNA W/C 19 sec 6.2 Presale Literature
Notification – Invacare
®
TDX SC Wheelchair
ANSI/RESNA W/C 19 sec 6.2 Presale Literature
Notification – Invacare
®
TDX SPREE Wheelchair
A. Minimum turning radius 20.1" with (2) U1 batteries.
Minimum turn-around width 31" with (2) U1 batteries.
B. The TDX SC wheelchair with (2) 22NF batteries has a maximum
length of 35.25" (895 mm) and the TDX SP wheelchair with (2) Group
24 batteries has a maximum length of 35.63" (905 mm), meeting the
ADA definition of a common wheelchair and the maximum length
requirements of lifts on public vehicles.
C. Total wheelchair mass for TDX SC wheelchair with (2) U1 batteries
= 235 lb. (106.8.3 kg) Adult.
D. Average lateral dummy displacement for TDX SC wheelchair with
(2) U1 batteries = approximately .47" (11.9 mm) Adult.
E. Overall Score for TDX SC wheelchair Adult with (2) U1 batteries =
18, Overall Rating = A
F. i. The TDX SC wheelchair tested was sized to accommodate a
168 lb. test dummy (17" x 17" x 22" high and 10" Center-Wheel
Drive tires.)
ii. The TDX SC wheelchair was tied down using four tie-down
brackets – 2 brackets located on the front of the base frame and
2 brackets located on the rear of the base frame.
iii. The TDX SC wheelchair was tested with a 168 lb. test dummy.
iv. The TDX SC wheelchair tested used a wheelchair-anchored
pelvic belt and vehicle-anchored shoulder belt.
v. The TDX SC wheelchair tested complies with the performance
requirements of ANSI/RESNA W/C 19 sec. 5.3.
G. For all types of vehicles, the TDX SC wheelchair requires four
SAE J2249- compliant tie-down strap assemblies for effective
securement.
H. The TDX SC wheelchair provides a location for anchoring of an
Invacare-provided pelvic belt. This belt has been tested in
accordance with ANSI/RESNA W/C 19.
I. The wheelchair-anchored pelvic belt is supplied by Invacare.
A. Minimum turning radius 18.9" with (2) U1 batteries.
Minimum turn-around width 29" with (2) U1 batteries.
B. The TDX SPREE wheelchair with (2) U1 batteries has a maximum
length of 39" (991 mm) and the maximum length requirements of lifts
on public vehicles.
C. Total wheelchair mass for TDX SPREE wheelchair with (2) U1
batteries = 237 lb. (108 kg).
D. Average lateral dummy displacement for TDX SPREE wheelchair
with (2) U1 batteries = approximately .53" (13.4 mm).
E. Overall Score for TDX SPREE wheelchair with (2) U1 batteries =
19, Overall Rating = A Overall
F. i. The TDX SPREE wheelchair tested was sized to accommodate
a 130 lb. test dummy (16" x 16" x 22" high and 10" Center-Wheel
Drive tires.)
ii. The TDX SPREE wheelchair was tied down using four tie-down
brackets – 2 brackets located on the front of the base frame and
2 brackets located on the rear of the base frame.
iii. The TDX SPREE wheelchair was tested with a 130 lb. test dummy.
iv. The TDX SPREE wheelchair tested used a wheelchair-anchored
pelvic belt and vehicle-anchored shoulder belt.
v. The TDX SPREE wheelchair tested complies with the perfor-
mance requirements of ANSI/RESNA W/C 19 sec. 5.3.
G. For all types of vehicles, the TDX SPREE wheelchair requires four
SAE J2249-compliant tie-down strap assemblies for effective
securement.
H. The TDX SPREE wheelchair provides a location for anchoring of
an Invacare-provided pelvic belt. This belt has been tested in
accordance with ANSI/RESNA W/C 19.
I. The wheelchair-anchored pelvic belt is supplied by Invacare.
29
Page 29
TheInvacare
®
TDX
®
Family…
The Right Rehab Solution From One Source.
INVACARE
®
TDX®SP
Power Wheelchair
Adjustable Rehab Seat
Invacare® Formula
INVACARE
®
TDX®SR
Power Wheelchair
Rehab Seating
INVACARE
TDX®SC
Power Wheelchair
®
Van Seating
INVACARE
®
TDX®SPREE
Power Wheelchair
Powered Seat Height
Adjustment Power Tilt
™
CG
Tilt
Invacare® Formula
Tilt/Recline
™
CG
Invacare® Formula
™
CG
Tilt
Powered Seat Height
Adjustment Manual Tilt
27
Page 30
Invacare Corporation
www.invacare.com
USA
One Invacare Way
Elyria, Ohio
44035-4190
(800) 333-6900
Canada
570 Matheson Blvd. E.,
Unit 8
Mississauga, Ontario
L4Z 4G4 Canada
(800) 668-5324