Invacare®InTouch™Stabilite™Cushion
Invacare®InTouch™Propel™Back
I N VA C A R E
®
N VA C A R E
I
®
CPCS Code = E2607, E2608
H
he Invacare
T
eveloped to provide pelvic stability and leg positioning for
d
atients with postural asymmetry. The Stabilite Cushion
p
comes fitted with a ThinAir
that assists in redistributing peak pressures away from
bony prominences as well as with the management of
shear forces that occur with activities of daily living.
®
nTouch
I
(Gentle Contour) E
™
S
™
tabilite
™
S
liner, a unique comfort layer
2605
(Max Contour)
eat Cushion was
Invacare®InTouch™Flovair™Cushion
HCPCS Code = E2607, E2608 (Gentle/Max Contour)
The Invacare®InTouch™Flovair™Seat Cushion was
developed to provide pelvic stability, leg positioning and
pressure management for patients with postural asymmetry
and skin integrity concerns. It incorporates a fluid overlay
used in tandem with the ThinAir™liner to maximize surface
area for optimal pressure redistribution. Additionally, the
layers work to reduce build up of shear forces against the
user while minimizing overall product weight. The InTouch
Flovair cushion is a great choice where positioning needs and
pressure management requirements are both key goals.
Invacare®InTouch™Stabilite™OM Cushion
HCPCS Code = E2605, E2606
CPCS Code = E2611
H
he Invacare
T
ack support so lightweight and comfortable, consumers will
b
orget it’s there. Hardware installation is no longer a hassle:
f
just grab it, set it and go. The rigid shell coupled with a soft,
contoured foam cushion provides gentle support and
facilitates postural symmetry. The Propel Back provides a
stable surface for propulsion and completion of activities
of daily living and daily mobility. Consumers will leave
ordinary back upholstery in the past when they try the
InTouch Propel Back.
®
I
nTouch
™
ropel
P
™
ack is a general purpose
B
Invacare®InTouch™PCS Back
HCPCS code = E2620/ E2621
The Invacare®InTouch™PCS Back was developed to be a
lightweight positioning back with applications for both
manual and power chair users, for upright seating systems
and for tilt and/or recline systems. The back was designed
with features including scapular cutouts, three inches of
lateral contour depth, soft foam, sacral support, height/angle/
depth adjustability and optional thoracic lateral supports
and pelvic stabilizers that synergize to provide the exceptional
Positioning, Comfort and Stability required by wheelchair
users everyday.
Seating
& Positioning
Seating
& Positioning
The Invacare®InTouch™Stabilite™OM Seat Cushion was
developed to address positioning needs for a level pelvis or a
mild to moderate pelvic obliquity. It is a uniquely simple design
for using inserts under the sacral region of the cushion to
manage mild to moderate obliquities, now or in the future.
© 2010 Invacare Corporation.
All rights reserved. Trademarks are identified by the symbols ™ and ®.
All trademarks are owned by or licensed to Invacare Corporation unless otherwise noted.
®
FloGel
is a registered trademark of S.N.F.
Specifications are subject to change without notification.
Invacare®Rehab Seating &
Positioning Products
With the number of new seating and positioning products
available today, it’s only natural to choose the products that
®
you know best. Invacare
Seating and Positioning products
offer a clinical benefit while making life more comfortable
for the consumer. This catalog is your source for Invacare
Seating and Positioning products.
Whether it’s the comfort and style of an Invacare
Absolute™Cushion, the revolutionary Invacare®InTouch
®
™
Flovair™Cushion or the Invacare®Stabilite™Cushion,
Invacare Seating and Positioning products provide optimal
solutions for any individual’s seating needs. Not only do
Invacare products raise the benchmark in functionality and
comfort for the consumer, they also ensure that all providers
can have confidencein these quality products.
For your convenience, we have included a perforated
Off-the-Shelf Product Guide that can be easily torn out and
used for reference. Post it on the wall, place it in a binder
or keep it with you as you travel to see clients. However
you decide to use it, we hope it helps in choosing the right
Invacare products.
Invacare is committed to providing you with products that
exceed your expectations. As the landscape of seating
changes, Invacare’s dedication to innovation, quality and,
most of all, your comfort, will stay the same.
TEAR ALONG THIS EDGE
Page Reference Guide
Invacare®Seat Cushions
Product HCPCS Code Page
Absolute
S
™
E2601 1-2
ingle Density E2601/E2602 1-2
Comfort-Mate Extra E2603/E2604 1-2
®
Infinity
Infinity®LoContour FloGel
InTouch
LoContour ViscoFoam E2603/E2604 3-4
®
™
Stabilite™Max Contour E2605 5-8
E2603/E2604 3-4
InTouch™Stabilite™OM E2605/E2606 5-8
™
InTouch
InTouch
Infinity
Infinity®Gentle/Max FloGel
Infinity®LoContour AirFlo
Infinity
Flovair™Gentle/Max Contour E2607/E2608 5-8
™
Stabilite™Gentle Contour E2607/E2608 5-8
®
Gentle/Max ViscoFoam E2607/E2608 3-4
®
™
®
Gentle/Max Contour AirFlo
™
E2607/E2608 3-4
K0734/K0735 3-4
K0736/K0737 3-4
Invacare®Backs
Product HCPCS Code Page
InTouch™Propel
Personal Back
Personal Back™10 Plus E2615/E2616 11-12
InTouch
™
™
10 E2615/E2616 11-12
™
PCS E2620/E2621 9-10
E2611 11-12
Accessories
Specifications
13-14
15
Invacare®Absolute™and Single Density Cushions: Simple seating solutions for comfort, fit and function.
or individuals with mild to moderate seating needs, the Invacare
F
ighly functional solutions. These cushions are designed to provide basic comfort using highly resilient foam.
h
®
A
HCPCS Code = E2601
Absolute™Cushion
Model no. EC
Features and Functional Benefits
• Lightweight Molded Polyurethane foam: Provides comfort and durability
• Gentle Contour: For comfort and centering in the seat
• Shaped cushion bottom: Allows use of cushion on taut sling upholstery
• Outer cover: Breathable water repellant cover to protect foam and keep the consumer dry
• Non-slip bottom: Keeps cushion secure and in place
HCPCS Code = E2601/E2602
Single Density Cushion
Model no. SD
Features and Functional Benefits
• Lightweight Contoured foam with deformation cut: Provides comfort and
• Outer cover: Durable water repellant cover to protect foam and keep the
™
bsolute
stability to the individual
consumer dry
nd Single Density cushions offer simple, but
a
Invacare®Comfort-Mate Extra
TheInvacare®Comfort-Mate Extra cushion goesone step further witha comfortable, molded design andadurablemoisture-resistant coating.
HCPCS Code = E2603/E2604
Comfort-Mate Extra Cushion
Model no. CMEX
Features and Functional Benefits
• Low profile, lightweight cushion: Designed for long-term sitting comfort and
easy lateral transfers
• Molded dual-firmness polyurethane foam: Soft top layer provides exceptional
comfort and firmer bottom layer stabilizes and supports the pelvis
• Contoured seating surface: Promotes neutral leg positioning while providing
gentle positioning
• Beveled sides: Allows use with a drop seat
• Moisture resistant coating: Seals and protects foam from moisture;
easily wipes clean
• Outer Cover: Breathable water repellant cover to keep the user cool and dry
1
B
A
C
C
B
A
Application
• Intended for individuals:
- with mild to moderate seating needs
- who are able to do own weight shift for pressure relief
• Comfort and durability
• Good rental wheelchair cushion
Specifications
Width: 16"–20"
Depth: 16"–18"
A. Height at adductor 3.25"
B. Height at abductor 2.25"
C. Height at rear 2"
Cushion weight approximately 2 lb.
Application
• Designed for individuals from pediatrics to geriatrics:
- with mild to moderate seating needs
- who are able to do own weight shift for pressure relief
• Comfort
• Good rental wheelchair cushion
Application
• Ideal for individuals:
- with long-term care needs
- who are able to do own weight shifts for pressure relief
- who need some skin protection
- who need comfort, stability and gentle positioning
• Good long-term care facility wheelchair cushion
®
• A great fit for the Infinity
seat-to-floor height
Drop Base to get the desired
Specifications
Width: 10"–24"
Depth: 7"–20"
A. Height at rear 2"
B. Height at rear (center) 1.5"
C. Height at front 2.5"
Cushion weight approximately 2 lb.
Specifications
Width: 14"–22"
Depth: 14"–20"
A. Height at adductor 2.625"
B. Height at abductor 3.0"
C. Height at rear 1.75"
D. Height at leg trough 2.25"
Cushion weight approximately 2.3 lb.
2
Invacare®Infinity®Cushions
The Invacare®Infinity®line of cushions is designed to provide
optimal rehab solutions for comfort, stability and pressure
redistribution, as well as address positioning needs. Additionally,
these versatile modular seating solutions can be modified to meet
current user needs or accommodate future changes. The Infinity
cushions are constructed with three support layers - the base
layer and the integrated middle pelvic support layer with an ischial
insert. In the Invacare®AirFlo™cushion, the integrated pelvic
support and ischial layers are replaced with 2" air flotation cells.
The Infinity cushions are available in three different contours - Lo,
Gentle and Max.
Features and Functional Benefits
• Lightweight Polyurethane foam base: Provides adequate postural support
• Contoured top foam: Provides comfort and enhances pelvic stability
• Integrated Middle Support Layer: Adjusts to correct or accommodate
pelvic obliquity
• Integrated Ischial Insert: Conforms to sensitive bony prominences and
allows optimal immersion for comfort, stability and pressure relief
• AirFlo Cells: Provide optimal immersion and suspension of bony prominences
for pressure redistribution
• Inner cover: Recovery material that is moisture proof and water resistant
with 4-way stretch to allow immersion
• Outer cover: 4-way stretch, water resistant, breathable cover to
dissipate heat and moisture
• Optional Removal leg wedges: Allows lower seat-to-floor height for
foot propellers or accommodates limited hip flexion (opens up seat
to back angle)
• Optional Leg Length Cutouts: 1; or 2" cutouts to accommodate
leg length discrepancies
3
LoContour
HCPCS Code = E2607/E2608 (Gentle/Max Contour)
E2603/E2604 (LoContour)
ViscoFoam Cushion
Model no. ILCVF, IGCVF, IMCVF
Integrated ischial insert is very soft visco foam
Application
• ViscoFoam cushion is an excellent choice for individuals who:
• Are at high risk of skin breakdown
• Require excellent support and stability
• Require a lightweight cushion
HCPCS Code = E2607/E2608 (Gentle/Max Contour)
E2603/E2604 (LoContour)
FloGel®by S.N.F. Cushion
Model no. ILCFG, IGCFG, IMCFG
Integrated ischial insert includes layer of gel over very soft visco foam
Application
• FloGel®cushion is an excellent choice for individuals who:
• Are at high risk of skin breakdown
• Require excellent support and stability
• Require a good dynamic shear reduction
LoContour is an excellent choice for individuals who:
• Have good postural control
• Need to accomodate postural asymmetry,
or example, windswept hips
f
• Need low profile for lateral transfer
• Foot propel
Specifications
Width: 13"–22"
Depth: 15"–20"
A. Height at adductor 2.75"
B. Height at abductor 2.25"
C. Height at leg trough 2.25"
A
Gentle Contour
Gentle Contour is an excellent choice for individuals who:
• Have moderate postural instability
• Require gentle control of posture
• Need moderate control of
abduction/adduction tendency
Specifications
Width: 13"–22"
Depth: 15"–20"
A. Height at adductor 3.38"
B. Height at abductor 3.38"
C. Height at leg trough 2.25"
A
C
B
C
B
HCPCS Code = K0736/K0737 (Gentle/Max Contour)
K0734/K0735 (LoContour)
AirFlo™Cushion
Model no. ILCAIR, IGCAIR, IMCAIR
Single hand operated air inflation bulb allows easy adjustment
Application
• AirFlo™cushion is an excellent choice for individuals who:
• Have a history of or are considered to be at very
high risk of skin breakdown
• Require an air flotation insert for immersion of bony prominences
• Require a postural support base for stability
Max Contour
Max Contour is an excellent choice for individuals who:
• Require high level of postural control
• Require optimal pressure reduction
and redistribution
Specifications
Width: 13"–22"
Depth: 15"–20"
A. Height at adductor 4.25"
B. Height at abductor 4.40"
C. Height at leg trough 2.66"
A
C
B
4
InTouch™Flovair™Cushion
InTouch
™
Stabilite™Cushion
™
InTouch
Stabilite™OM Cushion
5
Invacare®InTouch™Cushions
The Invacare®InTouch™Seat Cushions begin with the base for comfort, stability and function. The Stabilite™, Flovair™and Stabilite
OM cushions are three distinct cushions with one clear message- if the base isn’t right, nothing else matters.
With the exceptional InTouch Stabilite and Flovair cushions from Invacare, less is more. These hybrid cushions combine contouring
in the base with the latest advancements in pressure redistribution technology to create a seating experience like no other. These
cushions capture the stability of foam, the pressure redistribution of air and the shear reduction of fluid. This is all accomplished with
less volume than has traditionally been used in wheelchair cushions, thus reducing weight and maximizing comfort.
Additionally, the Stabilite OM cushion is intended to provide outstanding positioning and comfort with optimal stability for function.
Unique to the design are obliquity inserts under the base that can be utilized to correct or accommodate mild to moderate pelvic
obliquities now or in the future.
Positioning Support Base
The larger the surface area, the lower the pressure. Our engineers put purpose behind the contouring of the InTouch base. Leg troughs are slightly abducted.
Soft foam envelops the IT’s, coccyx and sacrum. Firmer foam supports the trochanters and provides additional pelvic support for stability. Smooth, refined
transitions are sculpted to replace steep ridges or uncomfortably placed abductors. The base is designed to maximize functionality and comfort when seated
in a wheelchair.
Features and Functional Benefits
• Soft foam: Allows immersion of the pelvis and increases contact over maximum surface area for maximum
comfort, stability and optimal pressure redistribution without bottoming out. By maximizing surface area,
pelvic excursion is limited
™
Maximize surface area
Removable Leg Wedges
• Medial Thigh Support: Gentle control of adduction tendencies
• Lateral Thigh Supports: Gentle control of abduction tendencies and positioning guidance to maintain
proper alignment of lower extremities
• Slightly Abducted Leg Troughs: Facilitates a neutral to anterior tilt of the pelvis, promoting a stable
upright posture
• Trochanter Cutouts: Provides pressure distribution anterior and posterior to the trochanters, further
promoting a stable pelvis in the seated position
• Trochanter Support: Firmer foam on either side of the base under the trochanters provides additional
pelvic support for stability
• Lateral Pelvic Support: Maintains pelvis in a centered position on the seat and provides lateral pelvic
stability and pelvic support
• Posterior Pelvic Support: Provides pelvic control required for stability and function
• Sacral Relief: Provides additional comfort and support for those sitting in a posterior pelvic tilt
• Low Profile: Lowers seat-to-floor height for foot propellers and allows easier lateral transfers without
compromising positioning/comfort/stability
• Optional Removable Leg Wedges: Lowers front seat-to-floor height for foot propellers and
accommodates limited hip flexion by opening up seat to back angle
• Optional Leg Length Cutouts: One or two-inch cutouts accommodate leg length discrepancies
6
Invacare®InTouch™Stabilite™Cushion
The Invacare®InTouch™Stabilite™seat cushion was developed to
provide pelvic stability and leg positioning for patients withpostural
asymmetry. The Stabilite cushion comes fitted with a patent-
pending ThinAir™liner, a unique comfort layer that assists in
reducing shear as well as in redistributing peak pressures away
from bony prominences. The Stabilite cushion is a great choice
for geriatric or CVA clients.
Invacare®InTouch™Flovair™Cushion
The Invacare®InTouch™Flovair™seat cushion was developed to
provide pelvic stability, leg positioning and pressure management
for patients with postural asymmetry and skin integrity
concerns. It incorporates a fluid overlay used in tandem with the
patent-pending ThinAir™liner to maximize surface area for optimal
pressure redistribution and reduce build up of shear forces
against the user, while minimizing overall product weight. The
Flovair cushion is a great choice for neuromuscular, TBI or SCI
clients without significant obliquity.
Invacare®InTouch™Stabilite™OM Cushion
A uniquely simple design for using inserts under the sacral region of the
cushion to manage mild to moderate obliquities, now or in the future.
Obliquity
Management
Simpledesign addresses
Level
One half-inch adjustment
One-inchadjustment
7
positioning needs for a
level pelvis or a mild to
moderate obliquity
• Accommodate obliquities
by lowering the cushion
on the low side of the
oblique pelvis
• Correct obliquitiesby
raising the cushion on
the low side of the
oblique pelvis
• Keep both inserts in
place to address a
level pelvis
Bottom View
HCPCS Code = E2607/E2608 (Gentle Contour), E2605 (Max Contour)
Stabilite™Cushion
Model no. ITSG, ITSM
Features and Functional Benefits
• Positioning foam base: Supports the pelvis and thighs; helps to prevent adduction
and internal rotation
TM
• ThinAir
seated position
Gentle/Max contour: Contour choices based on involvement level
•
liner: Helps reduce shear forces that occur during daily activites in a
HCPCS Code = E2607/E2608 (Gentle/Max Contour)
Flovair™Cushion
Model no. ITFG, ITFM
Features and Functional Benefits
• Positioning foam base: Supports the pelvis and thighs; helps to prevent adduction
and internal rotation
TM
• Fluid + ThinAir
Shear reduction as two layers work in harmony
• Gentle/Max contour: Contour choices based on involvement level
liner: Effectively redistributes pressure without weight penalty.
™
™
nTouch
I
lovair
F
Stabilite
/
™
entle Contour
G
Specifications
Gentle Max
Contour Contour
Width: 15"–24" 15"–20"
Depth: 15"–22" 15"–20"
A. Height at adductor 3.5" 4.38"
B. Height at abductor 3.5" 4.38"
C. Height at leg trough 2.87" 2.88"
HCPCS Code = E2605/E2606
Stabilite™OM Cushion
Model no. ITSOM
Features and Functional Benefits
• Positioning foam base: Supports the pelvis and thighs; helps to prevent adduction
and internal rotation
• Low Profile: Easier transfers without compromising stability/positioning/comfort
• Obliquity Inserts (Standard): Allow accommodation or correction of mild to moderate
obliquities
InTouch™Flovair™/Stabilite™Max Contour
Specifications
Width 14"– 24"
Depth 14"– 22"
Weight capacity
14"– 20" w = 300 lb.
21"– 24" w = 500 lb.
A. = 3.75
B. = 3.75
C. = 2.62
8
Invacare®InTouch™PCS Positioning Back
nTouch
™
CS positioning back with
P
ntroducing the Invacare
I
pplications for both manual and power chair users, for upright
a
eating systems and for tilt and/or recline systems. The back was
s
esigned with features that synergize to provide the exceptional
d
ositioning, Comfort and Stability required by wheelchair
P
sers everyday.
u
®
I
POSITIONING
• Lightweight aluminum back with 3" of
lateral contour depth
• Scapular cutouts
• Tapered contours at the sacral portion
• New easy to adjust hardware
COMFORT
Scapular cutout
Spacer fabric
• Soft foam over the back shell
• New spacer fabric upholstery
• Unique sizes in 1" width increments
STABILITY
• Optional thoracic lateral supports and pelvic
stabilizers for wheelchair users with
positioning needs that require additional
lateral or pelvic control
• Unique back mounting hardware
Pre-drilled headrest holes
Aluminum Shell
Sacral contours
Back Shell
Sacral support
3" contour depth
Specifications
Available widths: 14"–24"
Height: 16" (Regular); 20" (Tall)
Depth adjustment: 1.5" to the back
Angle adjust: up to 30°
Product weight: 4.7 lb.
Features and Functional Benefits
• Aluminum shell: Lightweight to reduce overall weight of
the frame and minimize manual mobility, thereby improving
efficiency with propulsion
• Pre-drilled headrest holes: Headrest can be mounted directly
on the back and easily accommodates standard headrest
mounting hardware
9
HCPCS Code = E2620/E2621
InTouch™PCS Positioning Back
Model no. ITPCSR, ITPCST
Features and Functional Benefits
• Regular and tall heights: Accommodates the different postural requirements and need for taller back
supports when used with tilt and/or recline
• 1" soft foam: Provides optimal comfort with pressure redistribution
Spacer fabric: Allows for improved airflow between the user and
•
back for optimal management of heat and moisture to promote better
skin integrity
Spacer fabric:
Regulation of heat and moisture
• Scapular cutouts: Facilitates upright positioning with trunk
extension without interfering with upper extremity function.
By not limiting upper extremity range of motion, overall
functionality is maximized
Quick Release Latch:
llows one hand operation for
A
removal and remount of the back
during transport
• 3" lateral contour depth: Provides lateral trunk support to facilitate centering and postural control with
proximal stability required for function
• Sacral support: Facilitates proximal stability required for function. Provides pelvic control/support for an
upright posture with trunk extension
• Sacral contours: Tapered contours at the sacral portion of the back allow full contact of the back shell against
the user without interfering with hip placement in the seating system
• One tool assembly: Only one tool needed for all installations, adjustments and accessories
• Single-point mounting hardware: Works with dual-point strength to create stability and securely
mounts between canes without any unwanted play, while allowing height, depth and back angle
adjustment. Designed to mount onto back canes with an outside diameter of 1" or 7/8"
• Angle adjustable hardware: Allows accommodation of hip range of motion limitations, kyphotic postures
and posterior pelvic tilt by opening up seat to back angle
• Depth adjustable hardware: Allows positioning without losing seat depth, thereby maximizing the area of
seating surface for optimal pressure redistribution
• Height adjustable hardware: Accommodates user’s positioning requirements in the wheelchair
Height
and width
adjustment
for optional
thoracic
lateral
supports
and pelvic
stabilizers
Optional Thoracic Lateral Supports: Optional
supports (4" tall) provide improved trunk control
and stability
Optional Pelvic Stabilizers: Optional supports
(3" tall) promote pelvic stability
These optional supports provide additional positioning for
the trunk and pelvis to increase support for maximizing
upright (spinal extension) and midline (centered) trunk
positioning. The thoracic lateral supports and pelvic
Thoracic
lateral
supports
stabilizers are adjustable in height and width for accom-
modating fixed posture asymmetries, correcting flexible
postural deformities or adjusting over time to support
Pelvic
stabilizers
postural changes incrementally in steps. Additionally,
these supports act as clinician’s hands to keep the
patient in the best position identified.
Quick Release Latch
Lock
Unlock
10
Invacare®InTouch™Propel™Back
nvacare
I
H
rovides gentle support and facilitates postural symmetry. The Propel Back provides a stable surface for propulsion and completion
p
f daily living activities. Consumers will leave ordinary back upholstery in the past when they try the InTouch Propel Back.
o
®
I
ardware installation is no longer a hassle: just grab it, set it and go. The rigid shell coupled with a soft contoured foam cushion
nTouch
™
ropel
P
™
ack is a general purpose back support so lightweight and comfortable consumers will forget it’s there.
B
HCPCS Code = E2611
InTouch™Propel™Back
odel no. ITPR
M
Features and Functional Benefits
• Solid, lightweight back: Intended to provide support for an upright posture and
improved sitting tolerance with less fatigue
• Soft Foam: Provides optimal comfort
• Scapular Cutouts: Improved upper extremity function and efficient wheelchair propulsion
• Redundant Tissue Cutouts: Increased lower back comfort
• 4-way adjustability: Adjustable in height/width/depth/angle to accommodate user’s
positioning requirements. Adjustments can be made while user is seated in the chair
Invacare®Personal Back™10 and Personal Back™10 Plus Backs
The Invacare®Personal Back™10 and Personal Back™10 Plus Backs combine simplicity of design with effectiveness of application. The
highly popular Personal Back line continues to provide the comfort, postural support and spinal alignment that you have come to expect.
HCPCS Code = E2615/E2616
Personal Back™10
Tall Regular
Personal Back
™
10 Plus
Personal Back™10 and Personal Back™10 Plus Backs
Model no. PBR, PBT Model no. PPR, PPT
Features and Functional Benefits
• Regular and Tall Heights: Accommodate different user postural requirements
• Aluminum Shell: Lightweight and mounts quickly and easily to the wheelchair
• Pre-contoured shell: Provides excellent contact, improved lateral stability and support
• Deep Lateral Contour: Provides increased midline support without interfering with
upper extremity range of motion
• Pre-drilled headrest pattern: Allows mounting of standard headrest mounting hardware
™
• Quick Set
• Optional Foam-in-Place kit: Provides additional support and positioning for consumers
who needs a more custom fit.
hardware: Allows increased adjustability in height, depth and back angle
See Accessories for additional information
11
Tall Regular
• One handed quick release: Allows easy removal and
remounting for transport
• One tool assembly (7/8" wrench): Only one tool
needed for all installations and adjustments
• Hardware: Two point mountings fit 7/8" to 1" canes
One-handed quick release Adjust depth/angle while client
Specifications
Width: 16"– 21" (in 1" increments)
Height: 16.5"
Depth adjust: 1.75"
Angle adjust: up to 27°
Product Weight: 4 lb.
is seated
Fits 7/8" or 1" canes with no
additional hardware
Personal Back™10
Application: Personal Back™10 Back
• The Personal Back10 Back is an excellent choice for
individuals who:
• Require comfort and stability with moderate
lateral support
• Require modifications in seat to back angle for
postural accomodation
Application: Personal Back™10 Plus Back
• The Personal Back10 Plus Back is an excellent choice for
individuals who:
• Require comfort and stability with increased
lateral support
• Recommended when using the foam-in-place kit
• Require modifications in seat to back angle for
postural accomodation
C
B
A
Personal Back™10 Plus
Specifications
Personal Back™10 Back Heights
Width Regular Tall
13" – 14" 14" 16"
15" – 26" 16" 19"
C
™
Personal Back
Width 13" 14" 15" 16" 17" 18" 19" 20" 22" 24" 26"
A (Outer Width) 12.13 13.13 14.13 15.13 16.13 17.13 18.13 19.13 21.13 23.13 25.13
B (Inner Width) 9.50 10.50 11.50 12.50 13.50 14.50 15.50 16.50 18.43 20.43 22.43
C (Contour Width) 5.14 5.28 5.41 5.54 5.68 5.81 5.94 6.08 6.60 6.86 7.13
10
Personal Back™10 Plus
Width 13" 14" 15" 16" 17" 18" 19" 20" 22" 24" 26"
A (Outer Width) 13.00 14.00 15.00 16.00 17.00 18.00 19.00 20.00 22.00 24.00 26.00
B (Inner Width) 9.50 10.50 11.50 12.50 13.50 14.50 15.50 16.50 18.43 20.43 22.43
C (Contour Width) 6.85 6.99 7.12 7.25 7.39 7.52 7.65 7.79 8.27 8.54 8.81
B
A
12
Cushion Rigidizer
• Lightweight plastic seat insert
• Securely attaches to bottom of cushioninside cover
• Fits betweenseat rails for level support
• Eliminates hammockeffect of seat upholstery
Adjustable Headrests
Two Step Adjustable
Headrest System
• Contouredhead and neck supports available in four styles
• Dual-ballswivel hardware for multi-planeadjustment
• Durable steel reinforced polyurethanepads - easily wipe clean
Small Adjustable
Headrest System
Infinity®Drop Base
• Provides stable support base for the cushion
• Lowers seat-to-floor height which aids in foot propulsion, opens up seat to back angle,
allowseasy lateraltransfersand improves basic functionality when in a seatedposition
• Width adjustable: Three sizes fit wheelchairs from 14" to 22" wide
• Height and angle adjustable: up to 2" of drop provided
• Portable quick-release hardware allows easy removal of base from wheelchair
Basic Headrest
CurvedAdjustable
Headrest System
Large Adjustable
Headrest System
• Padded to provide comfortable occipital support
• Horizontal and vertical adjustable hardware
• Outer cover easily removes for laundering
Foam-In-Place Kit
• Easy-to-use Foam-in-Place kit provides custom foam mold insertin minutes
• Provides additionalsupport and positioning for users who need a more custom fit
• Custom-molded insert can be easilyremoved for modification or remolded to meet
the changing needs of the user
• Can be used with Personal Back
13
™
10/ Personal Back™10 Plus
Full Tray - Hook and Loop Mount
• Lightweight and easy to handle
• Break-resistantclear polycarbonate tray surface
• Easily attaches to chair armrest with hook and loop straps
• Removabletrim allows thorough cleaning
Belts and Straps
• Three sizes of shoulder supports fit child, junior and adult
• Three sizes of padded lap beltsfit child, junior and adult;
pinch release buckles
• Push-button style release provides secureattachment
• Three sizes of four-point lap belt to fit child, junior and adult;
push button releasebuckle
Full Tray - Slide-on Mount
• Break-resistantclear polyester resin tray surface
• Width adjustable mounting hardware securely
fastens tray to chair arm pads
• Molded-inrim helps keep items on tray
Half Tray - Swingaway
• Break-resistantclear polycarbonate tray surface
• Tray securelybolts to wheelchair armrest and is durable
• Tray easily swings away when not in use
• Molded-inrim helps keep items on tray
14
Specifications
InTouch™Stabilite™/Flovair™Cushions
(pages5 -8)
Seat width 15" – 24" Gentle
15" – 20" Max
Seat depth 15" – 22" Gentle
15" – 20" Max
Productweight 3.05lb. Stabilite
4.20 lb. Flovair
Weightcapacity 15"– 20" 250lb.
21" – 24" 350 lb.
Limitedwarranty 2 years
InTouch™Stabilite™OM (pages5-8)
Seat width 14" – 24"
Seat depth 14" – 22"
Productweight 3 lb.
Weightcapacity
14" – 20" W 300 lb.
21" – 24" W 500 lb.
Limitedwarranty 2 years
All weights/measurements are approximate
Infinity®Cushions (pages3-4)
LoContour GentleContour Max Contour
Seat width 13" – 22" 13" – 22" 13" – 22"
Seat depth 15" – 20" 15" – 20" 15" – 20"
Productweight 4 lb. 4 lb. 4 lb.
Weightcapacity 250 lb. 250 lb. 250 lb.
Limitedwarranty 2 years 2 years 2 years
InTouch™Propel™Back (pages 11-12)
Width range 16"– 21" (1" increments)
Product height 16.5"
Depth adjust 1.75"
Angle adjust up to 27°
Product weight 4 lb.
Weight capacity 300 lb.
Limited warranty 2 years
All weight/measurements are approximate
InTouch™PCS Back (pages 9-10)
Available widths: 14" – 24" (1" increments)
Height: 16" (Regular); 20" (Tall)
Depth adjustment: 1.5" to the back
Angle adjust: up to 30°
Product weight: 4.7 lb.
User weight limited: 300 lb. (14" – 21");
500 lb. (22" – 24")
Limited warranty: 2 years
All weight/measurements are approximate
InTouch™Personal Back™10 (pages11-12)
Personal Back™10 Personal Back™10 Plus
Back height
13" – 14" widths 14", 16" 14", 16"
15" – 26" widths 16", 19" 16", 19"
Back width 13" – 20", 22", 24", 26" 13"– 20", 22", 24", 26"
Productweight
13" – 20" widths 5 lb. 6 lb.
22" – 26" widths 10 lb. 11 lb.
Weightcapacity
13" – 20" widths 250 lb. 250 lb.
22" – 26" widths 500 lb. 500 lb.
Limitedwarranty 2 years 2 years
Invacare Corporation
www.invacare.com
USA
One Invacare Way
Elyria, Ohio
44035-4190
(800) 333-6900
Canada
570 Matheson Blvd. E.
Unit 8
Mississauga, Ontario
L4Z 4G4 Canada
(800) 668-5324
© 2010
Invacare Corporation.
All rights reserved.
Trademarks are
identified by the symbols
™ and ®.
All trademarks are
owned by or licensed to
Invacare Corporation
unless otherwise noted.
FloGel is a registered
trademark of S.N.F.
Specifications are
subject to change
without notification.
Form No. 06-043
Rev. 03/10
15
Loading...