Operating Instructions
OVEN
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Contents |
|
|
|
|
|
|
|
|
GB |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Installation, 16-17 |
|
|
|
|
|
|
|
|
|
|
|
IT |
|
GB |
|
FR |
|
Positioning |
|
|
|
|
|
|
|
|
Electrical connection |
|
|
|
|
|
|
|
|
||
Italiano, 1 |
English,15 |
Français, 29 |
Data plate |
|||||
ES PT
Espanol, 43 Português, 57
Description of the appliance, 18
Overall view Control panel
Start-up and use, 19-20
Control panel lock
DEMO mode
Setting the clock and timer
Starting the oven
|
Cooking modes, 21-24 |
|
Manual cooking modes |
FZ 101.1 |
Automatic cooking modes |
FZ 101.1 IX |
Programming cooking |
FC 101.1 |
Practical cooking advice |
FC 101.1 IX |
Cooking advice table |
FQ 101.1 |
|
FQ 101 C.1 |
Precautions and tips, 25 |
FZ 1012 C.1 |
General safety |
FZ 1012 C.1 IX |
Disposal |
FQ 1012 C.1 |
Respecting and conserving the environment |
Care and maintenance, 26-27
Switching the appliance off
Cleaning the appliance
Cleaning the oven door
Replacing the light bulb
Assembling the sliding rack kit
Assistance, 28
Installation
Before operating your new appliance please read GB this instruction booklet carefully. It contains
important information concerning the safe operation, installation and maintenance of the appliance.
Please keep these operating instructions for future reference. Make sure that the instructions are kept with the appliance if it is sold, given away or moved.
Positioning
Keep all packaging materials out of the reach of children. It may present a choking or suffocation hazard (see Precautions and tips).
The appliance must be installed by a qualified person in compliance with the instructions provided. Incorrect installation may cause harm to people and animals or may damage property.
Built-in appliance
Use the appropriate cabinet to ensure that the appliance functions properly.
•The panels adjacent to the oven must be made of heat-resistant material.
•Cabinets with a veneer exterior must be assembled with glues which can withstand temperatures of up to 100°C.
•To install the oven under a counter (see diagram) or in a kitchen unit, the cabinet must have the following dimensions:
mm.23 |
. |
mm. |
|
mm |
|
|
45 |
|
595mm. |
|
|
mm.567 |
558 |
mm. |
593 |
|
|
|
||||
|
|
|
|
|
|
|
|
595 |
|
5 mm. |
|
|
|
|
mm. |
. |
|
|
|
|
|
|
mm |
|
|
|
|
|
|
|
545 |
|
|
|
|
|
. |
|
|
|
|
|
|
mm |
|
|
|
|
|
24 |
|
|
|
|
|
The appliance must not come into contact with electrical parts once it has been installed.
The indications for consumption given on the data plate have been calculated for this type of installation.
Ventilation
To ensure adequate ventilation is provided, the back panel of the cabinet must be removed. It is advisable to install the oven so that it rests on two strips of wood, or on a completely flat surface with an opening of at least 45 x 560 mm (see diagrams).
. |
45 |
mm |
mm |
|
|
|
. |
|
560 |
|
|
Centring and fixing
Position the 4 tabs on the side of the oven so that they are lined up with the 4 holes on the outer frame. Adjust the tabs according to the thickness of the cabinet side panel, as shown below:
20 mm thick: take off the removable part of the tab (see
diagram).
18 mm thick: use the first groove, which has already been set in the factory (see
diagram).
16 mm thick: use the second groove (see diagram).
Secure the appliance to the cabinet by opening the oven door and inserting 4 screws into the 4 holes on the outer frame.
All parts which ensure the safe operation of the appliance must not be removable without the aid of a tool.
16
Electrical connection
Ovens equipped with a three-pole power supply cable are designed to operate with alternating current at the voltage and frequency indicated on the appliance data plate (see below).
Fitting the power supply cable
|
|
1. Open the terminal |
|
|
|
board by inserting a |
|
|
|
screwdriver into the |
|
|
|
side tabs of the cover. |
|
|
|
Use the screwdriver as |
|
|
|
a lever by pushing it |
|
|
|
down to open the cover |
|
|
|
(see diagram). |
|
|
|
2. Install the power supply |
|
|
|
cable by loosening the |
|
|
|
cable clamp screw and the |
|
|
|
three wire contact screws |
|
|
|
L-N- . Connect the wires |
|
|
|
to the corresponding |
|
|
|
terminals: the Blue wire to |
|
|
|
the terminal marked (N), |
|
N |
L |
the Brown wire to the |
|
terminal marked (L) and |
|||
|
|
||
|
|
the Yellow/Green wire to |
|
the terminal marked |
|
(see diagram). |
3.Secure the cable by fastening the clamp screw.
4.Close the cover of the terminal board.
Connecting the supply cable to the mains
Install a standardised plug corresponding to the load indicated on the data plate (see table). The appliance must be directly connected to the mains using an omnipolar circuit-breaker with a
minimum contact opening of 3 mm installed between the appliance and the mains. The circuit-breaker must be suitable for the charge indicated and must comply with current electrical regulations (the earthing wire must not be interrupted by the circuitbreaker). The supply cable must be positioned so that it does not come into contact with temperatures higher than 50°C at any point.
The installer must ensure that the correct electrical connection has been made and that it is fully compliant with safety regulations.
Before connecting the appliance to the power
supply, make sure that: |
GB |
|
•The appliance is earthed and the plug is compliant with the law.
•The socket can withstand the maximum power of the appliance, which is indicated on the data plate (see below).
•The voltage is in the range between the values indicated on the data plate (see below).
•The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it. Do not use extension cords or multiple sockets.
Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.
The cable must not be bent or compressed.
The cable must be checked regularly and replaced by authorised technicians only (see Assistance).
The manufacturer declines any liability should these safety measures not be observed.
TABLE OF CHARACTERISTICS
|
width 43.5 cm |
|
Dimensions * |
height 32 cm |
|
|
depth 41.5 cm |
|
Volume * |
58 l |
|
|
voltage: 220-230V ~ 50Hz / |
|
Electrical connections |
maximum power absorbed |
|
|
2800W |
|
|
Directive 2002/40/EC on the |
|
|
label of electric ovens. |
|
ENERGY LABEL * |
Regulation EN 50304 |
|
|
|
|
|
Declared energy consumption |
|
|
for Forced convection Class – |
|
|
heating mode: |
Gratin. |
|
This appliance conforms to the |
|
|
following European Economic |
|
|
Community directives: |
|
|
73/23/EEC dated 19/02/73 |
|
|
(Low Voltage) and subsequent |
|
|
amendments - 89/336/EEC |
|
|
dated 03/05/89 |
|
|
(Electromagnetic Compatibility) |
|
|
and subsequent amendments - |
|
|
93/68/EEC dated 22/07/93 and |
|
|
subsequent amendments. |
|
|
2002/96/EEC |
|
* Without removable guide rails
17
Description
of the appliance
Overall view
GB
Control panel |
GUIDES for the |
|
|
sliding racks |
|
GRILL |
position 5 |
|
|
position 4 |
|
DRIPPING PAN |
position 3 |
|
position 2 |
||
|
||
|
position 1 |
Control panel
MANUAL COOKING MODE |
|
DURATION |
COOKING END TIME |
||
icons |
|
icon |
icon |
|
|
|
|
|
|
TIME |
|
|
|
|
|
display |
|
TEMPERATURE |
|
|
|
CLOCK |
|
|
|
|
icon |
||
display |
|
|
|
||
|
|
|
|
||
AUTOMATIC COOKING |
|
|
|
START |
|
MODE |
|
|
|
icon |
|
icons |
|
|
|
TIMER |
|
|
|
|
|
||
CONTROL PANEL |
|
|
|
icon |
|
POWER |
|
|
|
START / STOP |
|
button |
|
|
|
||
|
|
|
TIME ADJUSTMENT |
||
MANUAL COOKING |
OVEN |
TIME SETTING |
|||
buttons |
|||||
MODE |
LIGHT |
buttons |
|
||
|
|
||||
selector |
icon |
|
|
|
|
TEMPERATURE |
AUTOMATIC COOKING |
|
|
||
adjustment |
MODE |
|
|
|
|
|
selector |
|
|
|
|
18
Start-up and use
The first time you use your appliance, heat the empty oven with its door closed at its maximum temperature for at least half an hour. Ensure that the room is well ventilated before switching the oven off and opening the oven door. The appliance may emit a slightly unpleasant odour caused by protective substances used during the manufacturing process burning away.
The “Control panel lock” and “DEMO mode” can be activated/deactivated even when the control panel is switched off.
If no button is pressed within 2 minutes of the oven being switched on, the appliance will be switched off automatically.
Control panel lock
To lock the oven controls, press the 
button, the “START/STOP” button and the time “+” button on the right hand side of the control panel in sequence. A buzzer sounds and the TEMPERATURE display shows “Loc”.
To unlock the oven controls, press the 
button and the time “-” button on the right hand side of the control panel in sequence.
The control panel lock function can be activated when a cooking programme is in progress or when the oven is switched off, or when a cooking end time has been set and the start button pressed. The control panel lock function can also be deactivated in all the above situations and after the oven has completed the set cooking programme.
Demo mode
The oven can operate in DEMO mode: all heating elements are deactivated, and controls remain operative. To deactivate the DEMO mode, while the oven is switched on press the ON/OFF button, the START/ STOP button and the time "+" button on the right hand side of the control panel, in that order.
To deactivate the DEMO mode, while the oven is switched on press the ON/OFF button and the time “-” button on the right hand side of the control panel. A buzzer sounds and the time display shows “D off”. The DEMO mode can only be activated when the oven is switched on and no cooking programme has been commenced.
Setting the clock
The clock may be set when the oven is switched off or when it is switched on, provided that a delayed cooking cycle has not been programmed previously.
1. Press the 
button several times until the 
icon and the two digits TIME display flash.
2. |
Press the “+” and “-” buttons to adjust the hours. |
|
|
|
GB |
3. |
Press the |
button. |
4. |
Press the “+” and “-” buttons to adjust the minutes. |
|
5. |
Press the |
button again to confirm. |
Setting the timer
This may be set while the oven is switched off or while it is switched on.
1.Press the 
button several times until the 
icon and the three digits on the TIME display flash.
2.Press the “+” and “-” buttons to adjust the minutes; if you hold the buttons down the time on the display will scroll through the values more quickly.
3.Press the 
button again to confirm.
Switching the oven on
Press the 
button to switch the oven on or off.
Starting the oven
Press the 
button to select the desired manual cooking mode. The cooking temperature and duration may be set.
Press the 
button to select the desired automatic cooking mode. The cooking temperature and duration are both set to default values. The duration may be modified by ±5/10 minutes, depending on the selected cooking mode. The text “In” which appears on the TEMPERATURE display stands for “place the food IN the oven”. A delayed cooking cycle may be programmed.
Begin cooking by pressing the “START/STOP” button. The oven will begin its preheating stage, and the current preheating temperature indicator lights illuminate when this stage is complete. The temperature of the manual cooking modes may be adjusted by pressing the “+” and “-” buttons on the left hand side of the control panel.
When the preheating stage is complete, a buzzer sounds and all current preheating temperature indicator lights are illuminated: place the food in the oven. During cooking it is always possible to:
-Change the temperature by pressing the “+” and “- ” buttons on the left hand side of the control panel (manual cooking modes only).
-Interrupt cooking while maintaining the set duration by pressing the START/STOP button.
-Press the 
button to stop cooking.
19
Loading...