DUROS
Hoover
®
Canister Cleaner
Owner’s Manual
English ➜ pp. 1-10
Español ➜ pàg.11-16
Français ➜ p.17-22
Review this manual before
operating cleaner.
www.hoover.com
®
™
Fill in and retain
The model and serial number are located on the bottom of the cleaner.
For your personal records, please enter the COMPLETE model and serial number in
the spaces provided and retain this information.
Your cleaner is model________________________________________________________
and has serial number ______________________________________________________
It is suggested that you attach your sales receipt to this owner’s manual. Verification of
date of purchase may be required for warranty service of your Hoover product.
Index
Important Safeguards ............................2
Assembling Cleaner ..............................3
Carton contents ..................................3
Connect hose, wand, nozzle ..............3
Cleaner Description................................4
How To Use
Canister Cleaner..............................4-6
Powered Nozzle..................................4
Cleaning Tools ....................................5
Cleaning Stairs....................................5
Storage ............................................5,6
Maintenance
Filter bag replacement........................6
Cleaning filters ....................................7
Replacing power nozzle belt ..........7-8
Replacing agitator brush roll ............8
Replacing headlight............................8
Lubrication ..........................................8
Service....................................................9
If You Have a Problem............................9
Clearing Blockages ............................9
Warranty................................................10
Important Safeguards!
When using an electrical appliance, always follow
basic precautions, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE
Warning:
• Do not use outdoors or on wet surfaces.
• Close supervision is necessary when any appliance is used by or near children.
Do not allow vacuum cleaner to be used as a toy or to run unattended at any
time.
• Keep hair, loose clothing, fingers, feet and all parts of body away from openings,
rotating agitator and other moving parts. Do not operate cleaner in bare feet or
when wearing open toe shoes or sandals.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches,
or hot ashes.
• Do not use to pick up flammable or combustible liquids such as gasoline or fine
wood sandings or use in areas where they may be present.
• The hose contains electrical wires. Do not use if damaged, cut or punctured.
• Avoid picking up hard, sharp objects with the cleaner. They may damage the
cleaner.
• Always turn off this appliance before connecting or disconnecting hose or
motorized nozzle.
• Brush roll may suddenly restart, unplug from electrical outlet before servicing.
• Do not use without filter bag in place. Change bag frequently when picking up
very fine materials such as powder.
• Use extra care when cleaning on stairs.
• Do not put any object into openings. Do not use with any opening blocked; keep
free of dust, lint, hair, or anything that may reduce air flow.
• Do not pull or carry by cord, use cord as a handle, close door on cord or pull
cord around sharp edges or corners. Do not run appliance over cord. Keep cord
away from heated surfaces.
• Always disconnect cord from electrical outlet before servicing the cleaner.
• Unplug cleaner when not in use. Turn off all controls before unplugging.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
Never handle plug or appliance with wet hands.
• If cleaner has a cord reel, hold on to the plug while cord is being rewound to prevent cord from whipping.
• The use of an extension cord is not recommended.
• Do not use with damaged cord or plug. If appliance is not working as it should,
has been dropped, damaged, left outdoors, or dropped into water, take it to a
Hoover Factory Service Center or Authorized Hoover Warranty Service Dealer
(Depot).
• Use vacuum cleaner only for its intended use as described in the instructions.
Use only attachments recommended by The Hoover Company; others may cause
hazards.
Warning:This product contains chemicals known to the
State of California to cause cancer.
WASH HANDS AFTER HANDLING.
Save these instructions!
To reduce the risk of fire, electric shock or injury:
2
© 2004 The Hoover Company
www.hoover.com
3
Unpack cleaner from carton and identify the parts shown. Remove and
dispose of cardboard packing.
A. Canister cleaner
B. Extension wands and hose
C. Power nozzle
D. Crevice tool
E. Round swivel brush
F. Upholstery tool
Operate cleaner only at voltage specified on data plate on bottom of
cleaner.
A
B
C
D
E
F
1-1
1. Assembling cleaner
This cleaner was inspected and packaged carefully before being shipped
from the factory. If you should happen to need assistance during assembly
or operation,
Visit us online at www.hoover.com to find the service outlet nearest
you (click on the “Service” button) OR
Call 1-800-944-9200 for an automated referral of authorized service
outlet locations (U.S. only) OR
Call 1-330-499-9499 to speak with a representative in the Hoover
Consumer Response Center.
Carton contents
Connect hose, wand and nozzle
1-2
A
Connect hose
Push the hose connector end (A) into the
opening (B) on the front of the cleaner,
making sure the prongs (C) on the hose
end align with the holes in the opening.
When hose end is properly inserted, you
will hear a click.
To disconnect hose from the cleaner,
press the button (D) on the hose connector and pull straight out.
Note: The flexible hose contains electrical wires for connection to the
power nozzle and should not be used
if damaged. The wires should not be
seen through the outer skin.
B
C
D
Continued
➟
1-3
Attach wand and power
nozzle
Push the end of the wand with the button (E) firmly into the hose grip (F),
making sure the prongs (G) on the
wand align with the holes (H) in the
hose grip. When wand is properly
inserted, you will hear a click.
To remove the wand from the hose,
press on the button (E) located on the
end of the wand and pull straight out.
A second extension wand can be
attached in the same manner.
Push the opposite end of the wand into
the power nozzle (I), aligning the prongs
(J) on the power nozzle with the holes
(K) in the wand. When the power nozzle
is properly inserted, you will hear a click.
To remove the power nozzle, press on
the button (L) located on the power nozzle and pull straight out.
1-4
LK
E
I
F
H
J
G
Loading...