![](/html/e4/e425/e425bcd6775115a1fb578cb09f419c02d95257781a20fe90c5ff682662667081/bg1.png)
Universal Stand for mounting Eppendorf Micromanipulators
InjectMan NI 2, TransferMan NK 2, PatchMan NP 2 next to the microscope
1
3
Note
To guarantee its stability, the Universal Stand requires a ferromagnetic ground plate. The
magnetic force stabilizes the positioning of the Universal Stand. This plate does not form part of
the delivery package. It can be obtained via specialist distributors or from a suitable retail outlet.
The plate should be a least 4 mm thick. The size and the weight should be sufficient to ensure
that the weight of the motor module can be borne safely (e.g. 8 x 300 x 600 mm, approx. 13 kg).
2
4
![](/html/e4/e425/e425bcd6775115a1fb578cb09f419c02d95257781a20fe90c5ff682662667081/bg2.png)
Universal Stand for mounting Eppendorf Micromanipulators
Safety precautions
In addition to the safety precautions contained in the operating manual for the
micromanipulator, it is essential to observe the following:
– Before assembling the motor module, please ensure that the Universal stand is positioned
securely and that maximum stability is guaranteed!
– If an impulse of sufficient strength is applied, the levering arm of the Universal Stand cause
the module construction to tip over!
– Do not disassemble the module construction by simply loosening the magnet! If the feet of
the magnet are in the "Loose" position, the entire module construction may tip over!
– The Universal Stand is fitted with a powerful magnet. During Assembly/disassembly, this
could be problematic for persons wearing a pacemaker! In addition, other magnetic storage
media (e.g. credit cards, floppy disks) or magnetized objects (e.g. mechanical watches) may
cause problems when near the Universal Stand!
– Loosing the screws to the clamping plate when the module construction is altered or
adjusted may cause the module unit to slip downwards suddenly. This may cause serious
injury!
–Avoid vibrations when altering or aligning the module construction as this may damage the
motor module!
Ordering information
Article Order no. Order no. for
international North America
Universal Stand 5181 250.005 920008631
for mounting Eppendorf Micromanipulators
Spacer (41 mm) 5181 255.007 920008666
In touch with life
Your local distributor: www.eppendorf.com/worldwide
Eppendorf AG · Germany · Tel. +49 40 538 01-0 · E-Mail: eppendorf@eppendorf.com
Eppendorf North America, Inc. · USA · Toll free phone 800 645 3050 · E-Mail: info@eppendorf.com
Application Support
Europe, International: support@eppendorf.com ·· North America: support_NA@eppendorf.com
Asia, Pacific: support_Asia@eppendorf.com
eppendorf is a registered trademark.
5181 250.900-02/1105 · Printed in Germany