Emerson Fisher Baumann 24000S Data Sheet

24000S Valve

D103331X012

Baumannt 24000S Stainless Steel
Control Valve

The Baumann 24000S versatile, pneumatic, control
valve may be used for the control of pressure,
temperature, level, and flow. NPS 1/2 through 2 valves
are available with NPT end connections. NPS 3 is
available as wafer style only. The CF8M stainless steel
valve body will withstand mildly corrosive fluids, yet is
economical enough to use in applications where
carbon steel is normally specified.

Features

 Compactandlightweightdesign reduces installed

piping costs.

Product Bulletin

52.1:24SS

March 2013

 End connection options are available to meet your

piping standards.

 Dual stem and plug guiding provides increased

stability during plug travel.

 High-quality S31600 stainless steel trim materials;

S41600 stainless steel trim available.

 Multiple trim capacity reductions available to meet

changing processrequirements.

 Epoxy powder-coated actuator with stainless steel

fasteners for corrosion resistance.

 Multi-spring field-reversible actuator with reduced

deadband permits direct operation from remote
signal devices.

 Actuator and yoke can be removed from the valve

assembly while maintaining packing integrity.

W9759

Baumann 24000S NPT Control Valve

 Fisherr FIELDVUE™digital valve controllers available

for remote calibration and diagnostics in facilities
utilizing the PlantWebt architecture.

 The FIELDVUE DVC2000 digital valve controller has a

local user interface that includes a liquid crystal
display and four push buttons for menu navigation.

 NOLEEK bellows bonnet and single through triple

extension bonnets are available.

www.Fisher.com

Product Bulletin

52.1:24SS
March 2013

24000S Valve

D103331X012

Figure 1. Baumann 24000S Valve Body Assembly

Figure 2. Baumann 24000S Valve with Extension
Bonnet, available in Single and Double Extension
Lengths

E1266

E1267

2

24000S Valve

D103331X012

Table 1. Materials of Construction

Key
No.

1 Valve Body ASME SA351 CF8M

2 Seat Ring

Plug (Metal Seat) Cv < 2.5

4

5 Stem ASTM A276 S31600 ConditionA

6 Packing Set (Refer to page 5)

7 Bonnet Flange

8 Bonnet

9 Drive Nut (Yoke) S30400

10 Packing Follower ASTM A276S31600 / S31603 Dual Certified

11 Bonnet Studs (Bolt) ASME SA193 Grade B8 Class 1

12 Bonnet Nuts ASME SA194 Grade B8

27 Locknuts Stainless Steel (18-8 Stainless Steel)

49 Body Gasket Graphite Grade GHR withS31600 Insert

58 TravelIndicator ASME SA240 S30400

Plug (Metal Seat) Cv > 4.0

Description Material

(used for 6.3 mm and 9.5 mm [1/4 inchand 3/8 inch] orifice diameters only)

Standard ASME SA479 S21800 Annealed
Optional ASTM A582 S41600 ConditionT
Standard ASTM A276 S31600 / S31603 Dual Certified
Optional ASTM A582 S41600 ConditionT

Plug (Soft Seat)

1/2 to2 inch ASME SA351 CF8M

3inch ASME SA240 S31600 / S31603 Dual Certified

Standard ASME SA479 S31600 / S31603 Dual Certified

Extension ASME SA479 S31600 / S31603 Dual Certified

NOLEEK ASME SA479 S31600 / S31603 Dual Certified

ASTM A276 S31600 / S31603 Dual Certified

ASTM A276 S31600 / S31603 Dual Certified

with PTFE (Polytetrafluoroethylene) Insert

Product Bulletin

52.1:24SS

March 2013

Figure 3. Screwed Seat

E1268

Figure 4. Integral Seat

E1269

3

Product Bulletin

52.1:24SS
March 2013

24000S Valve

D103331X012

Figure 5. 24151S Low Flow Trim

E1270

Table 2. 24151S Low Flow Trim

Key

Number

4 Plug ASME SA479 S21800

51

Description Material

Seat Sub-Assembly
52 Cage ASTM A276 S31600 / S31603
53 Seat PTFE
54 Collar ASTM A276 S31600/ S31603
55 Washer ASTM A276 S31600 Cond B
56 Insert ASTM A276 S31600/ S31603

Figure 6. 24177S Low Flow Trim

E1271

Table 3. 24177S Low Flow Trim

Key Number Description Material

23 Gland ASTM A276 S31600/S31603

2

1. For optional trim materials, consultyour Emerson Process Management sales office
for price and delivery. Baumann 32 actuator requiresdual-stopswith177trimseries.

24 Retainer Nut ASTM A276 S31600/ S31603
25 Insert Reinforced PTFE
26 Housing ASTM A276 S31600/ S31603

4 Plug ASME SA479 S21800

(1)

Seat Sub-Assembly

4

24000S Valve

D103331X012

Product Bulletin

52.1:24SS

March 2013

Figure 7. Standard Spring-Loaded PTFE V-Ring
Packing Kit

E1240

Table 4. Standard Spring-Loaded PTFE V-Ring
Packing Kit

Key Number Description Material

6 Spring ASTM A313 S30200

14 Packing Set

16 Washer ASME SA240 S31600

20 Spacer

PTFE (Polytetrafluoroethylene) /

PTFE, 25%carbon filled

J-2000

(filled-Polytetrafluoroethylene)

Figure 9. ENVIRO-SEAL™ Packing Kit (Optional)

E1248

Table 6. ENVIRO-SEAL Packing Kit (Optional)

Key Number Description Material

13 Bushings Carbon-Graphite

14 Packing Rings

17

18 Bushing PEEK (polyetheretherketone)

19 Washers Modified PTFE

Belleville

Spring

PTFE (Polytetrafluoroethylene) /

PTFE, 25% carbon filled

N06600 Nickel Alloy(ASTM B637

N07718, 40HRC max)

Figure 8. Molded Graphite (Flexible Graphite)
Packing Kit (Optional)

E1241

Table 5. Molded Graphite (Flexible Graphite)
Packing Kit (Optional)

Key Number Description Material

13 Bushings Carbon-Graphite

14A Packing Rings Graphite

14B Packing Ring Graphite

Special ENVIRO-SEAL
Packing Note

The ENVIRO-SEAL PTFE packing system is suitable for
100 ppm environmental applications on services up to

51.7 barg (750 psig) and process temperatures
ranging from -46 to 232_C(-50to450_F).

For non-environmental applications, this packing
system offers excellent performance at the same
temperature range up to the maximum valve working
pressure.

Temperature limits apply to packing arrangements
only. Complete valve assembly temperature limits may
differ, refer to appropriate pressure/temperature
ratings.

(Reference Fisher Packing Selection Guidelines for
Sliding-Stem Valves, Bulletin 59.1:062,
D101986X012).

5

Product Bulletin

52.1:24SS
March 2013

24000S Valve

D103331X012

Figure 10. NOLEEK Bellows Bonnet Assembly

UNLIMITED STEM

ROTATION WITHOUT

TWISTING BELLOWS

BACKUP PACKING

SYSTEM (SEE

PACKING DETAIL ON

PAGE 5)

TIME PROVENDOUBLE

WALLED BELLOW

MADE FROM S31600,

RATED FORUP TO 49.7

BAR (720 PSI)

PRESSURE

TELL-TALE

CONNECTION

(1/8 NPT)

FULL EXTENSION

PROVIDES HEAT

DISSIPATION, IDEAL

FOR HEAT TRANSFER

FLUIDS

WARNING

The Baumann NOLEEK valve bonnet assembly is not
intended for use in lethal service applications.

The NOLEEK Bellows Bonnet Assembly is reliable and
user-friendly. Typical service life is in excess of 250,000
full cycles under 100 psi pressure. The bonnet adds
only approximately 5 inches to the height of a
standard valve. Operating temperature range is -195
to 399_C(-320to750_F).

Table 7. Baumann NOLEEK Bellow Bonnet Assembly

Key
No.

4 Plug See table 1

6

8

21 Plug Retaining Pin S30300

22

Description Material

V-Ring Packing Kit (Standard) See table 4

ENVIRO-SEAL Packing Kit

(Optional)

Housing S31600/S31603

Bellows S31603/1.4571 SST
Bonnet CF8M

HexSocketPipePlug,

1/8 NPT

See table 6

S30400

E1272

Figure 11. Bellows Pressure Temperature Curve

49.7 barg@ -195_C (720 psig @-320_F)

E1250

TEMPERATURE (_F)

48.5 barg@ 93_C (703.25 psig @ 200_F)

33.9 barg@ 398_C
(491.6 psig@ 750F)

6

Product Bulletin

24000S Valve

D103331X012

Table 8. Cv Values at 100% Plug Opening (Kv = 0.86 x Cv)

VALVE SIZE ORIFICE DIAMETER PLUG TRAVEL

DN NPS mm inch mm inch Cv Cv Cv Cv Cv Cv Cv

3.97 0.156 12.7 0.50 ---

15
25

20 1 20.6 0.8125 12.7 0.50 --- --- --- 4, 8.5 4.7, 9.5 4 4, 9.5

40 1-1/2 31.8 1.25 19.1 0.75 --- --- --- 17.5 9, 17.5 17.5 17.5

50 2 38.1 1.5 19.1 0.75 --- --- ---

80 3 50.8 2.0 19.1 0.75 --- --- --- 35 35, 52.3 35, 61 35,61

1/2

1

6.3 0.25 12.7 0.50

7.9 0.3125 12.7 0.50 --- ---

9.5 0.375 12.7 0.50 --- --- ---

102 151 177 577 548 / 588 677 648 / 688

0.00013

0.00025

0.0005

0.001

0.002

0.004

0.008

0.015

0.03

0.06

0.10

0.20

0.45

0.02

0.05

0.10

0.20

--- --- ---

0.01 0.02,

PLUG SERIES

--- --- --- --- ---

0.22

0.61

1.0

0.0005

0.001,

0.002

0.005,

0.05

--- --- --- ---

1.0, 1.5

2.0

10, 18,

30.5

1.5, 2.5

10, 17.5,

30.5

52.1:24SS

March 2013

---

0.1, 0.2,

0.5 1.0,

2.0

10, 17.5

0.5

1.0

1.5

2.0

10, 17.5,

30.5

Figure 12. Baumann 24000S Trims

102 Linear

LowFlowTrim

W9747

151 Modified Equal %

Low Flow Trim

W9751 W9748 W9749

177 Modified Equal %

Low Flow Trim

548 / 577 / 588

Equal %Trim

648 / 677 / 688

Linear Trim

W9750

7

Product Bulletin

52.1:24SS
March 2013

Table 9. ISA Sizing Coefficients

Series Cv Rating FL Fd XT KC

102

151

177

548/588

577

677

0.02

0.05

0.10

0.20

0.00013

0.00025

0.0005

0.001

0.002

0.004

0.008

0.015

0.03

0.06

0.10

0.20

0.45

0.0005

0.001

0.002

0.005

0.01

0.02

0.05

0.22

0.61

1

1.5

2.5

4.7
9

9.5

10

17.5

30.5
35

52.3

1

1.5

2.5

4.0

8.5
10

17.5
18

30.5
35

0.1

0.2

0.5
1
2
4

10

17.5
35
61

0.95

0.98

0.95 0.70 0.76 0.76

0.98 0.28 0.81 0.94

0.90

0.90 0.46 0.68 0.73

0.90

0.90 0.46 0.68 0.73

0.90

0.90

-continued-

0.06

0.09

0.013

0.18

0.35

0.04

0.05

0.06

0.075

0.10

0.11

0.15

0.18

0.22

0.25

0.30

0.40

0.40

0.33

0.42

0.40

0.33

0.42

0.08

0.12

0.19

0.27

0.46

0.76 0.86

0.81 0.94

0.68 0.73

0.68 0.73

0.68 0.73

0.68 0.73

24000S Valve

D103331X012

8

24000S Valve

D103331X012

Table 9. ISA Sizing Coefficients (continued)

Series Cv Rating FL Fd XT KC

0.5

648/688

1

1.5
2
4

9.5

17.5

30.5
35
61

0.90

0.90

Table 10. Technical Specifications

NOMINAL PIPE SIZE DN 15,25, 40, 50, and 80 NPS1/2,1,1-1/2,2,and3

END CONNECTIONS Screwed NPT (except for NPS 3, wafer style only) Wafer / Buttweld

PRESSURE RATING CL300(CL150 forNPS 3 per ASME B16.34)

VALVE BODY MATERIAL CF8M ASTM A351

CHARACTERISTIC Equal Percentage or Linear

0.40

0.33

0.42

0.46

0.68 0.73

0.68 0.73

Product Bulletin

52.1:24SS

March 2013

Table 11. Temperature Ratings for Packing and Seat Material

PTFE Soft Seat

SEATING MATERIAL

PACKING AND BONNET

COMBINATIONS

1. Temperature limits apply to seating orpacking arrangements only. Complete valve assembly temperature limits maydiffer, refer to appropriate pressure/temperatureratings. For more
information on packing selection, reference Fisher Packing Selection Guidelines for Sliding-Stem Valves, Bulletin 59.1:062, D101986X012.

Reinforced PTFE 177Trim -73 to 232_C (-100 to 450_F)

Metal Seat 102, 548, 588, 648, 688 Trim -195 to 537_C (-320 to1000_F)

BONNET STYLE PACKING TEMPERATURE LIMIT

Standard Bonnet

Extension Bonnet

Bellows NOLEEK Bellows -195to 399_C (-320 to 750_F)

(1)

151 Trim -29 to177_C(-20to350_F)

577 & 677 Trim -73 to 232_C(-100 to 450_F)

Spring Loaded PTFE -73 to 232_C (-100 to 450_F)

ENVIRO-SEAL -45 to 232_C(-50to450_F)

Graphite -73 to 232_C (-100 to 450_F)

Spring Loaded PTFE -195 to 232_C (-320 to 450_F)

ENVIRO-SEAL -45 to 232_C(-50to450_F)

Graphite -195 to537_C (-320 to 1000_F)

Table 12. Actuator Specifications

TYPE 32, 54, 70 Multi-SpringDiaphragm (Single Acting)

DIAPHRAGM AREA 210, 350, 450 cm2/ 32,54, 70 in

AIR FAILURE 32 and 54 Fails Open orClosed (Field Reversible) / 70 Fails Closed ONLY

(1)

TRAVEL

AMBIENT TEMPERATURE RANGE -29_Cto71_C/-20_F to 160_F

MAXIMUM AIRPRESSURE 2.4 barg / 35 psig

DIAPHRAGM MATERIAL

SPRING CASES Steel, Powder Epoxy-Coated with Stainless Steel Fasteners

YOKE Ductile Iron, Powder Epoxy-Coated

1. Dual travel stops are available on Baumann 32 and 54actuators ONLY. These are not field reversible.

2. Optional reinforced VMQ (Silicone) diaphragm withFKM (Fluorocarbon) O-ring actuator stemseal for high temperature conditions (-29_Cto121_C/-20_F to 250_F) is available with
Baumann 32 and 54 actuators ONLY.

(2)

12.7 or19.1 mm / 0.50 or 0.75 inches

NBR (Nitrile) / TPES (Polyester Thermoplastic) Fabric

2

9

Product Bulletin

)

52.1:24SS
March 2013

Figure 13. Valve Body Pressure / Temperature Ratings ASME CL150 Valves (Source: ASME B16.34)

ASME B16.34 A351 CF8M

Class 150

24000S Valve

D103331X012

20

15

10

5

19 bar @ 38°C19 bar @ -195°C

13.7 bar @ 200°C

8.4 bar @ 350°C

Valve Body Pressure (barg)

0

-250 -200 -150 -100 -50 0 50 100 150 200 250 300 350 400 450 500 550

1.4 bar @ 538°C

Operating Temperature (°C)

ASME B16.34 A3 51 CF8M

Class 150

300

275 psi @ -320°F

250

275 psi @ 100°F

200

150

100

Val ve Bo dy P ressure (p s i g

50

0

-400 -300 -200 -100 0 100 200 300 400 500 600 700 800 900 1000

Operatin g T emperature (° F)

E1426

10

170 psi @ 500°F

20 psi @ 1000°F

24000S Valve

D103331X012

Figure 14. Valve Body Pressure / Temperature Ratings ASME CL300 Valves (Source: ASME B16.34)
(Does not apply to 24000S NPS 3 valves)

ASME B16.34 A351 CF8M

Class 300

60

Product Bulletin

52.1:24SS

March 2013

49.6 bar @ -195°C

50

40

30

20

Valve Body Pressure (barg)

10

0

-250 -200 -150 -100 -50 0 50 100 150 200 250 300 350 400 450 500 550

49.6 bar @ 38°C

35.7 bar @ 200°C

30.3 bar @ 350°C

25.2 bar @ 538°C

Operating Temperature (°C)

ASME B16.34 A351 CF8M

Class 300

800

720 psi @ -320°F

700

720 psi @ 100°F

E1427

600

500

400

300

200

Val ve Bo dy P res sur e (psig)

100

0

-400 -300 -200 -100 0 100 200 300 400 500 600 700 800 900 1000

560 psi @ 300°F

435 psi @ 700°F

365 psi @ 1000°F

Operating Temperature (°F)

11

Product Bulletin

52.1:24SS
March 2013

24000S Valve

D103331X012

Table13.AllowablePressureDrops(bar)

ORIFICE

DIA.

(mm)

6.3 12.7 32 0.3-1.0 49.6 --- 49.6 --- 0.2-0.9 49.6 --- 49.6 ---

7.9 12.7 32 0.3-1.0 --- 28.8 --- 49.6 0.2-0.9 --- 28.8 --- 49.6

9.5 12.7 32 0.3-1.0 31.2 19.2 49.6 49.6 0.2-0.9 31.2 19.2 49.6 49.6

20.6 12.7

27.0 12.7

31.8 19.1

38.1 19.1

50.8 19.1

1. Do not exceed valve body temperature pressure ratings.

PLUG

TRAVEL

(mm)

ACT

TYPE

32 0.3-1.0 7.79 1.31 15.6 9.10 0.2-0.9 7.79 1.31 27.3 20.8
32 0.5-1.0 15.6 9.10 23.4 16.9 0.2-0.7 19.5 13.0 39.0 32.5
54 0.3-1.0 5.93 --- 17.7 11.2 0.2-0.9 11.8 5.30 41.4 34.8
54 0.5-1.0 23.6 17.0 35.4 28.9 0.2-0.7 29.5 23.0 49.6 49.6
54 0.6-1.0 35.4 28.9 47.2 40.7 --- --- --- --- --­32 0.3-1.0 4.19 --- 9.45 4.27 0.2-0.9 4.69 --- 16.5 11.4
32 0.5-1.0 9.45 4.27 14.1 8.96 0.2-0.7 11.8 6.62 23.6 18.4
54 0.3-1.0 3.59 --- 10.7 12.5 0.2-0.9 7.17 2.0 25.0 19.9
54 0.5-1.0 14.3 9.10 21.4 16.3 0.2-0.7 17.9 12.7 35.7 30.5
54 0.6-1.0 21.4 16.3 28.5 23.4 --- --- --- --- --­32 0.3-1.0 3.45 --- 6.96 2.48 0.2-0.9 3.45 --- 12.1 7.65
32 --- --- --- --- --- 0.2-0.7 8.69 4.20 17.3 12.9
54 0.3-1.0 5.24 --- 10.5 6.07 0.2-0.9 5.24 --- 18.3 13.9
54 0.5-0.9 10.9 6.07 15.7 11.3 0.2-0.7 13.1 8.69 26.3 21.8
54 0.7-1.0 18.3 13.9 23.6 19.2 --- --- --- --- --­70 0.7-1.0 24.9 20.5 32.1 27.6 --- --- --- --- --­32 0.3-1.0 2.14 --- 4.89 1.10 0.2-0.9 2.41 --- 8.55 4.76
32 --- --- --- --- --- 0.2-0.7 6.13 2.34 12.2 8.48
54 0.3-1.0 3.72 --- 7.38 3.65 0.2-0.9 3.72 --- 19.9 9.17
54 0.5-0.9 7.38 3.65 11.1 7.31 0.2-0.7 9.24 5.52 18.5 14.8
54 0.7-1.0 12.9 9.17 16.7 12.9 --- --- --- --- --­70 0.7-1.0 17.7 13.9 22.7 18.9 --- --- --- --- --­70 0.8-1.2 --- --- 27.7 23.9 --- --- --- --- --­32 0.3-1.0 1.38 --- 2.83 --- 0.2-0.9 1.38 --- 4.89 2.0
32 --- --- --- --- --- 0.2-0.7 3.52 --- 7.03 4.14
54 0.3-1.0 2.14 --- 4.27 1.38 0.2-0.9 2.14 --- 7.44 4.55
54 0.5-0.9 4.27 1.38 6.34 3.52 0.2-0.7 5.31 2.41 10.6 7.72
54 0.7-1.0 7.45 4.55 9.58 6.69 --- --- --- --- --­70 0.7-1.0 10.1 7.24 13.0 8.07 --- --- --- --- --­70 0.8-1.2 --- --- 15.9 13.0 --- --- --- --- ---

BENCH
RANGE
(barg)

(1)

AIR-TO-OPEN ACTION AIR-TO-CLOSE ACTION

0.2-1.0 barg SIGNAL
TO ACTUATOR

Max CL

IV

Shutoff

Press.

Max CL

VI

Shutoff

Press.

WITH POSITIONER

1.38 bargAIR
SUPPLY

Max CL

Shutoff

Press.

Max CL

IV

VI

Shutoff

Press.

BENCH
RANGE

(barg)

0.2-1.0 barg SIGNAL
TO ACTUATOR

Max CL

IV

Shutoff

Press.

Max CL

Shutoff

Press.

WITH POSITIONER

1.38 barg AIR
SUPPLY

VI

Max CL

IV

Shutoff

Press.

Max CL

VI

Shutoff

Press.

12

24000S Valve

D103331X012

Product Bulletin

52.1:24SS

March 2013

Table14.AllowablePressureDrops(psi)

ORIFICE

DIA. (in)

0.25 0.50 32 5-15 720 --- 720 --- 3-13 720 --- 720 ---

0.3125 0.50 32 5-15 --- 418 --- 720 3-13 --- 418 --- 720

0.375 0.50 32 5-15 452 278 720 720 3-13 452 278 720 720

0.8125 0.50

1.0625 0.50

1.25 0.75

1.5 0.75

2.0 0.75

1. Do not exceed valve body temperature pressure ratings.

PLUG

TRAVEL

(in)

ACT

TYPE

32 5-15 113 19 226 132 3-13 113 10 396 301
32 7-15 226 132 339 245 3-10 283 188 565 471
54 4-15 86 --- 257 162 3-13 171 77 600 505
54 7-15 343 248 514 419 3-10 428 334 720 720
54 9-15 514 419 685 591 --- --- --- --- --­32 5-15 68 --- 137 62 3-13 68 --- 239 165
32 7-15 137 62 205 130 3-10 171 96 342 267
54 4-15 52 --- 155 81 3-13 104 29 363 288
54 7-15 207 132 311 236 3-10 259 184 518 443
54 9-15 311 236 414 340 --- --- --- --- --­32 5-15 50 --- 101 36 3-13 50 --- 176 111
32 --- --- --- --- --- 3-10 126 61 251 187
54 5-15 76 --- 152 88 3-13 76 --- 266 202
54 7-13 152 88 228 164 3-10 190 126 381 316
54 10-14 266 202 343 278 --- --- --- --- --­70 10-15 362 297 466 401 --- --- --- --- --­32 5-15 35 --- 71 16 3-13 35 --- 124 69
32 --- --- --- --- --- 3-10 89 34 177 123
54 5-15 54 --- 107 53 3-13 54 --- 188 133
54 7-13 107 53 161 106 3-10 134 80 269 214
54 10-14 188 133 242 187 --- --- --- --- --­70 10-15 256 201 329 274 --- --- --- --- --­70 12-18 --- --- 402 347 --- --- --- --- --­32 5-15 20 --- 41 --- 3-13 20 --- 71 29
32 --- --- --- --- --- 3-10 51 --- 102 60
54 5-15 31 --- 62 20 3-13 31 --- 108 66
54 7-13 62 20 92 51 3-10 77 35 154 112
54 10-14 108 66 139 97 --- --- --- --- --­70 10-15 147 105 189 147 --- --- --- --- --­70 12-18 --- --- 230 189 --- --- --- --- ---

BENCH
RANGE

(psig)

(1)

AIR-TO-OPEN ACTION AIR-TO-CLOSE ACTION

3-15 psig SIGNAL TO

ACTUATOR

Max CL

IV

Shutoff

Press.

Max CL

VI

Shutoff

Press.

WITH POSITIONER

20 psigAIR SUPPLY

Max CL

Shutoff

Press.

Max CL

IV

VI

Shutoff

Press.

BENCH
RANGE

(psig)

3-15 psigSIGNAL TO

ACTUATOR

Max CL

IV

Shutoff

Press.

Max CL

Shutoff

Press.

VI

WITH POSITIONER

20 psigAIR SUPPLY

Max CL

IV

Shutoff

Press.

Max CL

Shutoff

Press.

VI

13

Product Bulletin

52.1:24SS
March 2013

Table15.ValveDimensions

A B

VALVE SIZE

DN NPS mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch

15 1/2 300 7.9 3.1 N/A N/A 78.7 3.1 213.4 8.4 351 13.8 227.8 8.97

25 1 300 102 4.0 102 4.0 78.7 3.1 215.9 8.5 351 13.8 227.8 8.97

40 1-1/2 300 114 4.5 114 4.5 88.9 3.5 226 8.9 363 14.3 235.7 9.28

50 2 300 124 4.9 124 4.9 83.8 3.3 221 8.7 356 14 234.4 9.23

80 3 150 N/A N/A 165 6.5 96.5 3.8 234 9.2 371 14.6 235.7 9.28

ASME
CLASS

NPT Wafer Standard

Extension Bonnet

Single Double

24000S Valve

D103331X012

NOLEEK Bellows

Table 16. Valve Assembly Weights

VALVE SIZE WEIGHT

DN NPS kg lb

15 1/2 2.3 5

25 1 2.7 6

40 1-1/2 4.1 9

50 2 5.0 11

80 3 9.1 20

Table 18. Baumann 24000S Wafer Style

Valve Size DN 15 / NPS 1/2 DN 25 / NPS 1 DN 40 / NPS 1-1/2 DN 50 / NPS 2 DN 80 / NPS 3

ASME Flange None CL150 CL150 CL150 CL150

DN Flange None PN 16 PN 16 PN 16 PN 16

NPT Yes Yes Yes Yes None

1. The Baumann 24000S valve is available as NPT and wafer style (fits between RF line flanges). Not all sizesare available as wafer.This table outlines available constructions.

(1)

Table 17. Actuator Weights

ACTUATOR TYPE

32 4.5 10

54 11.3 25

70 15.4 34

(1)

MV1020

(1)

VA1020

NV24-MFT (non spring return)

NVF24-MFT or NVF24-MFT-E

(spring return)

1. Electric actuators,reference Baumann bulletin52.1:NVACT, D103326X012.

(1)

(1)

kg lb

10 22

14 30

1.5 3.3

1.8 4

WEIGHTS

14

24000S Valve

D103331X012

Product Bulletin

52.1:24SS

March 2013

Figure 15. Dimensional Drawings

216
(48.5)

229
(9.0)

B

24000S w/ BAUMANN 32 ATO ACTUATOR

152
(46.0)

141
(5.5)

1/4 NPT

3660/3661

A

94 (3.7)
MAX

279
(411.0)

127 (5.0)

276
(10.9)

BAUMANN 54 ATO ACTUATOR w/

FIELDVUE DVC2000 DIGITAL VALVE

CONTROLLER

160
(46.3)

163 (6.4)
MAX

71 (2.8)
MAX

333
(413.1)

60
(2.4)

271
(10.7)

229
(9.0)

3/4 INCH
SQUARE

BAUMANN 70 ATO ACTUATOR w/ FIELDVUE

DVC6000 DIGITAL VALVE CONTROLLER

160
(46.3)

130 (5.1)
MAX

276
(10.9)

BAUMANN 32 ATO/FAIL CLOSE

ACTUATOR WITH HANDWHEEL

216
(48.5)

31 (1.24)

E1277

Note: Actuator removal requires 115 mm (4.5 inches) vertical clearance.
Note: Electric actuators are available. Contact your Emerson Process Management sales office for details.

BAUMANN 32 ACTUATOR WITH ADJUSTABLE

OPEN/CLOSE DUAL TRAVEL STOPS

BAUMANN 32 ATC/

FAIL OPEN ACTUATOR

WITH HANDWHEEL

BAUMANN 54 ATO/FAIL CLOSE

ACTUATOR WITH HANDWHEEL

FAIL OPEN ACTUATOR

125 (4.9)

284
(11.2)

NV ELECTRIC ACTUATOR

BAUMANN 54 ATC /

WITH HANDWHEEL

mm
(inch)

15

Product Bulletin

52.1:24SS
March 2013

24000S Valve

D103331X012

Table 19. Pneumatic Actuators

Actuator Type

(1)

32

54

70

1. Baumann 32 actuator requires dual-stops with 177 trim series.

Table 21. Model Numbering System

24 S

Actuator

(1)

Type

1. Choose from tables 19 and 20.

Valve Body

Series

Plug Series Characteristic Seat Leakage

102 Linear / Metal Seat IV S NPT Omit Standard

151 ModifiedEqual % / PTFE Seat VI E Extension

177 Modified Equal % / Reinforced PTFE VI EB NOLEEK

577 Equal % / PTFE Seat VI

548 Equal % / Metal Seat (S41600) IV

588 Equal % / Metal Seat (S31600) IV

648 Linear / Metal Seat (S41600) IV

677 Linear / PTFE Seat VI

688 Linear / Metal Seat IV

Table 20. Electric Actuators

Actuator Type Travel

MV1020 N/A

VA1020 N/A

(2)

NV

(3)

NVF

(4)

NVFE

1. Refer to Baumann bulletin 52.1:NVACT, D103326X012.

2. NV24-MFT = Non spring return.

3. NVF24-MFT = Spring return - fail open.

4. NVF24-MFT-E - Spring return- fail closed.

(1)

Valve Body

Material

50

75

Bonnet Style

Neither Emerson, Emerson Process Management,nor any of their affiliated entitiesassumes responsibility for the selection, use or maintenance
of anyproduct. Responsibility for proper selection, use, and maintenance ofany productremains solelywith the purchaser and end user.

Baumann, Fisher, FIELDVUE, PlantWeb, and ENVIRO-SEAL are marks owned by one of the companies in the Emerson Process Management business unit of
Emerson Electric Co. Emerson Process Management, Emerson, and the Emerson logo are trademarks andservice marksof Emerson Electric Co. All other
marks are the property oftheir respective owners.

The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they arenot
to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are
governed by our terms and conditions, which are availableupon request. Wereserve theright tomodify orimprove thedesigns orspecifications of such
products at any time without notice.

Emerson Process Management
Marshalltown, Iowa 50158 USA
Sorocaba, 18087 Brazil
Chatham, Kent ME4 4QZ UK
Dubai, United Arab Emirates
Singapore 128461 Singapore

www.Fisher.com

E 2009, 2013 Fisher ControlsInternational LLC. All rights reserved.

16