B40 - B380/C1500R
* High case dielectric strength
* High surge current capability
* Low forward voltage drop
* Ideal for printed circuit board
* Case : Reliable low cost construction
utilizing molded plastic technique
* Epoxy : UL94V-O rate flame retardant
* Terminals : Plated leads solderable per
MIL-STD-202, Method 208 guaranteed
* Polarity : Polarity symbols marked on case
* Mounting position : Any
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Input Voltage R+C -Load
Maximum Average Forward Current For
Free Air Operation at Tc = 45
Peak Forward Surge Current Single half sine wave
on rated load (JEDEC Method) at T
Maximum Series Resistor C-Load V
Maximum Forward Voltage per Diode at I
Peak Voltage per Diode Ta = 25
Typical Thermal Resistance (Note 1)
Storage Temperature Range
1 ) Thermal resistance from Junction to Ambient at 0.375" (9.5 mm) lead length P.C. Board with, 0.22" x 0.22" (5.5 x 5.5 mm) copper Pads.
SILICON BRIDGE RECTIFIERS
PRV : 100 - 900 Volts
Io : 1.5 Amperes
WOB
0.39 (10.0)
0.31 (7.87)
0.22 (5.59)
0.18 (4.57)
MIN.
1.10 (27.9)
0.22 (5.59)
0.18 (4.57)
Dimension in inches and (millimeter)
AC
0.034 (0.86)
0.028 (0.71)
AC
+
1.00 (25.4)
MIN.
-AC
0.22 (5.59)
0.18 (4.57)
RATING
Maximum DC Blocking Voltage VDC 100 200 300 600 900 Volts
°
C -Load 1.5
J
Rating for fusing at TJ = 125°C ( t < 100 ms. )
Maximum load Capacitance + 50%
Maximum Reverse Current at Rated Repetitive
Operating Junction Temperature Range TJ - 50 to + 125
°
RMS
F
°
SYMBOL
RRM
RMS
F(AV)
IFSM 50 Amps.
STG
B40-
B80-
B125-
B250-
B380-
UNIT
Ω
°
°
UPDATE : APRIL 23,1998