* High case dielectric strength of 2000 V
* High surge current capability
* High reliability
* Low reverse current
* Low forward voltage drop
* Fast switching for high efficiency
* Ideal for printed circuit board
* Case : Reliable low cost construction
utilizing molded plastic technique
* Epoxy : UL94V-O rate flame retardant
* Lead : Axial lead solderable per
MIL - STD 202 , Method 208 guaranteed
* Polarity : Polarity symbols marked on case
* Mounting position : Any
* Weight : 5.15 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOL
FKBL
FKBL
FKBL
FKBL
FKBL
FKBL
FKBL
UNIT
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts
Maximum RMS Voltage V
RMS
35 70 140 280 420 560 700 Volts
Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts
Maximum Average Forward Current Tc = 50
°
C I
F(AV) 4.0 Amps.
Peak Forward Surge Current Single half sine wave
Superimposed on rated load (JEDEC Method) I
FSM 150 Amps.
Rating for fusing ( t < 8.3 ms. )
I
2
t
166
A
2
S
Maximum Forward Voltage drop per Diode at IF = 4.0 Amps. VF 1.4 Volts
Maximum DC Reverse Current Ta = 25
°
C I
R
10
µ
A
at Rated DC Blocking Voltage Ta = 100
°
C
IR(H) 1.0 mA
Maximum Reverse Recovery Time (Note 1) Trr 150 250 500 ns
Typical Thermal Resistance per Diode (Note 2)
R
θ
JC
3.3 °
C/W
Operating Junction Temperature Range T
J - 50 to + 150 °
C
Storage Temperature Range TSTG - 50 to + 150 °
C
= 1 Amp., Irr = 0.25 Amp.
2 ) Thermal resistance from Junction to case with mounted on a 2.0" X 1.6"x 0.3" ( 5 cm. x 4 cm. x 0.8cm ) Al. Plate.
RATING
0.085 (2.16)
0.065 (1.65)
KBL
0.77 (19.56)
0.265 (6.73 )
0.235 (5.97)
0.200 (5.08)
0.190 (4.82)
0.052 (1.32)
0.048 (1.22)
Dimensions in inches and ( millimeter )
AC AC
0.825 (20.95)
1.00 (25.4)