EIC 1N5399G, 1N5398G, 1N5397G, 1N5396G, 1N5395G Datasheet
...
1N5391G - 1N5399G
PRV : 50 - 1000 Volts
Io : 1.5 Amperes
FEATURES :
*Glass passivated chip
*High current capability
*High reliability
*Low reverse current
*Low forward voltage drop
MECHANICAL DATA :
*Case : DO-41 Molded plastic
*Epoxy : UL94V-O rate flame retardant
*Lead : Axial lead solderable per MIL-STD-202,
Method 208 guaranteed
*Polarity : Color band denotes cathode end
*Mounting position : Any
*Weight : 0.339 gram
GLASS PASSIVATED JUNCTION
SILICON RECTIFIERS
DO - 41
1.00 (25.4)
0.107 (2.7) MIN.
0.080 (2.0)
0.205 (5.2)
0.166 (4.2)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0.034 (0.86) |
|
|
|
1.00 (25.4) |
|||||
|
|
|
|
|
|
MIN. |
|||
0.028 (0.71) |
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dimensions in inches and ( millimeters )
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25 °C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
RATING |
|
SYMBOL |
1N |
1N |
1N |
1N |
1N |
1N |
1N |
1N |
1N |
UNIT |
|
5391G |
5392G |
5393G |
5394G |
5395G |
5396G |
5397G |
5398G |
5399G |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
Maximum Repetitive Peak Reverse Voltage |
VRRM |
50 |
100 |
200 |
300 |
400 |
500 |
600 |
800 |
1000 |
Volts |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Maximum RMS Voltage |
|
VRMS |
35 |
70 |
140 |
210 |
280 |
350 |
420 |
560 |
700 |
Volts |
|
|
|
|
|
|
|
|
|
|
|
|
|
Maximum DC Blocking Voltage |
|
VDC |
50 |
100 |
200 |
300 |
400 |
500 |
600 |
800 |
1000 |
Volts |
|
|
|
|
|
|
|
|
|
|
|
|
|
Maximum Average Forward Current |
|
|
|
|
|
|
|
|
|
|
|
|
0.375"(9.5mm) Lead Length Ta = 75°C |
IF(AV) |
|
|
|
|
1.5 |
|
|
|
|
Amps. |
|
Peak Forward Surge Current |
|
|
|
|
|
|
|
|
|
|
|
|
8.3ms Single half sine wave Superimposed |
|
|
|
|
|
|
|
|
|
|
|
|
on rated load (JEDEC Method) |
|
IFSM |
|
|
|
|
50 |
|
|
|
|
Amps. |
Maximum Forward Voltage at IF = 1.5 Amps. |
VF |
|
|
|
|
1.1 |
|
|
|
|
Volts |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Maximum DC Reverse Current |
Ta = 25 °C |
IR |
|
|
|
|
5.0 |
|
|
|
|
μA |
|
|
|
|
|
|
|
|
|
|
|
|
|
at rated DC Blocking Voltage |
Ta = 100 °C |
IR(H) |
|
|
|
|
50 |
|
|
|
|
μA |
|
|
|
|
|
|
|
|
|
|
|
|
|
Typical Junction Capacitance (Note1) |
CJ |
|
|
|
|
15 |
|
|
|
|
pF |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Typical Thermal Resistance (Note2) |
RθJA |
|
|
|
|
30 |
|
|
|
|
°C/W |
|
Junction Temperature Range |
|
TJ |
|
|
|
- 65 to + 175 |
|
|
|
°C |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
Storage Temperature Range |
|
TSTG |
|
|
|
- 65 to + 175 |
|
|
|
°C |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Notes :
(1)Measured at 1.0 MHz and applied reverse voltage of 4.0VDC
(2)Thermal resistance from Junction to Ambient at 0.375" (9.5mm) Lead Lengths, P.C. Board Mounted.
UPDATE : AUGUST 2, 1998
Loading...