EIC 5KP90A, 5KP90, 5KP85A, 5KP85, 5KP8.0A Datasheet

5KP SERIES

VBR : 5.0 - 180 Volts

PPK : 5000 Watts

FEATURES :

*5000W Peak Pulse Power

*Excellent clamping capability

*Low incremental surge resistance

*Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.)

*Typical IR less then 1μA above 10V

MECHANICAL DATA

*Case : Molded plastic

*Epoxy : UL94V-O rate flame retardant

*Lead : Axial lead solderable per MIL-STD-202,

Method 208 guaranteed

*Polarity : Cathode polarity band

*Mounting position : Any

*Weight : 2.73 grams

TRANSIENT VOLTAGE

SUPPRESSOR

AR - L

0.053 (1.35)

0.050 (1.27)

		0.250 (6.4)
		0.235 (6.0)
	0.410 (10.4)	1.00 (25.4)
		MIN.
	0.380 (9.70)

Dimensions in inches and ( millimeter )

DEVICES FOR BIPOLAR APPLICATIONS

For Bi-directional use C or CA Suffix

Electrical characteristics apply in both directions

MAXIMUM RATINGS

Rating at 25 °C ambient temperature unless otherwise specified.

	Rating	Symbol	Value	Unit
	Peak Pulse Power Dissipation at tp = 1ms	PPK	Minimum 5000	Watts
	(Note 1, Fig. 4)
	Steady State Power Dissipation at TL = 75 °C	PD	8.0	Watts
	Lead Lengths 0.375", (9.5mm) (Note 2)
	Peak Forward Surge Current, 8.3ms Single Half
	Sine-Wave Superimposed on Rated Load	IFSM	400	Amps.
	(JEDEC Method) (Note 3)
	Operating and Storage Temperature Range	TJ, TSTG	- 55 to + 150	°C

Note :

(1)Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 °C per Fig. 1

(2)Mounted on Copper Leaf area of 0.79 in2 (20mm2).

(3)Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minutes maximum.

UPDATE : SEPTEMBER 6, 2001

ELECTRICAL CHARACTERISTICS

Rating at = 25 °C ambient temperature unless otherwise specified

	Breakdown Voltage @ IT				Reverse	Maximum	Maximum	Maximum	Maximum
			( Note 1 )		Stand off	Reverse Leakage	Peak Pulse	Clamping	Voltage
TYPE					Voltage	@ V RM	Current (Note2)	Voltage @ IPPM	Temperature
		V BR (V)		IT	V R W M	IR	IPPM	V C	Variation of
	Min.		Max.	(mA)	(V)	( μA )	(A)	(V)	V BR (mV/° C)
5KP5.0	6.40		7.30	50	5.0	5000	520	9.60	4.0
5KP5.0A	6.40		7.00	50	5.0	5000	543	9.20	4.0
5KP6.0	6.67		8.15	50	6.0	5000	439	11.4	4.0
5KP6.0A	6.67		7.37	50	6.0	5000	485	10.3	4.0
5KP6.5	7.22		8.82	50	6.5	2000	407	12.3	4.0
5KP6.5A	7.22		7.98	50	6.5	2000	447	11.2	4.0
5KP7.0	7.78		9.51	5.0	7.0	1000	378	13.3	5.0
5KP7.0A	7.78		8.60	5.0	7.0	1000	417	12.0	5.0
5KP7.5	8.33		10.2	5.0	7.5	250	350	14.3	6.0
5KP7.5A	8.33		9.21	5.0	7.5	250	388	12.9	6.0
5KP8.0	8.89		10.9	5.0	8.0	150	333	15.0	6.0
5KP8.0A	8.89		9.83	5.0	8.0	150	367	13.6	6.0
5KP8.5	9.44		11.5	5.0	8.5	50	314	15.9	7.0
5KP8.5A	9.44		10.4	5.0	8.5	50	347	14.4	7.0
5KP9.0	10.0		12.2	5.0	9.0	20	295	16.9	8.0
5KP9.0A	10.0		11.1	5.0	9.0	20	325	15.4	8.0
5KP10	11.1		13.6	5.0	10	15	266	18.8	9.0
5KP10A	11.1		12.3	5.0	10	15	294	17.0	9.0
5KP11	12.2		14.9	5.0	11	10	249	20.1	10
5KP11A	12.2		13.5	5.0	11	10	274	18.2	10
5KP12	13.3		16.3	5.0	12	10	227	22.0	11
5KP12A	13.3		14.7	5.0	12	10	251	19.9	11
5KP13	14.4		17.6	5.0	13	10	210	23.8	12
5KP13A	14.4		15.9	5.0	13	10	232	21.5	12
5KP14	15.6		19.1	5.0	14	10	194	25.8	13
5KP14A	15.6		17.2	5.0	14	10	215	23.2	13
5KP15	16.7		20.4	5.0	15	10	188	26.9	15
5KP15A	16.7		18.5	5.0	15	10	206	24.4	15
5KP16	17.8		21.8	5.0	16	10	176	28.8	18
5KP16A	17.8		19.7	5.0	16	10	192	26.0	16
5KP17	18.9		23.1	5.0	17	10	164	30.5	19
5KP17A	18.9		20.9	5.0	17	10	181	27.6	18
5KP18	20.0		24.4	5.0	18	10	155	32.2	20
5KP18A	20.0		22.1	5.0	18	10	172	29.2	19
5KP20	22.2		27.1	5.0	20	10	139	35.8	24
5KP20A	22.2		24.5	5.0	20	10	154	32.4	22
5KP22	24.4		29.8	5.0	22	10	127	39.4	27
5KP22A	24.4		26.9	5.0	22	10	141	35.5	24
5KP24	26.7		32.6	5.0	24	10	116	43.0	30
5KP24A	26.7		29.5	5.0	24	10	128	38.9	27
5KP26	28.9		35.3	5.0	26	10	107	46.6	33
5KP26A	28.9		31.9	5.0	26	10	119	42.1	29
5KP28	31.1		38.0	5.0	28	10	99	50.1	34
5KP28A	31.1		34.4	5.0	28	10	110	45.4	30
5KP30	33.3		40.7	5.0	30	10	93	53.5	38
5KP30A	33.3		36.8	5.0	30	10	103	48.4	35
5KP33	36.7		44.9	5.0	33	10	85	59.0	41
5KP33A	36.7		40.6	5.0	33	10	94	53.3	38