Druck IDT 600 Data sheet
Product Note
The IDT is an effective barrier for protecting Druck portable pressure
calibrators against the ingress of dirt and moisture which may be
present in the gaseous pressure media or pneumatic devices under
test. Installed directly onto the standard calibrator pressure port,
regular use of the IDT 600 will prevent contamination of the calibrator
pneumatic system, improving it’s long term reliability and reducing
maintenance costs. In addition it prevents cross contamination of the
devices under test.
Simple to use
The IDT 600 is fitted to the calibrator or other instrument to be
protected. The device under test is then fitted to the upper G1/8
pressure port. Any dirt or moisture is then trapped inside the
transparent chamber giving the operator an opportunity to clean the
trap before contamination occurs.
The IDT 600 has no diaphragm or internal components, which could
cause a pressure drop and therefore does not affect calibration
accuracy.
Easy to maintain
The IDT 600 is simple to dismantle and easy to clean. It should
be cleaned after excessive contamination builds up which may
overflow into the calibrator. Top and bottom sections are simply
unscrewed, releasing the transparent chamber which may then
be wiped clean.
Pressure connections
G 1/8 (IDT 600-1) or 1/8 NPT (IDT 600-2). Male thread for
calibrator, female for user connection.
Maximum pressure
The system should not be pressurised above 35 bar/500 psi.
Orientation
The IDT 600 is designed for use in the vertical position and
should be removed from the calibrator during transit.
Pressure media
Gases compatible with stainless, acrylic and nitrile.
Compatible products
For use with Druck pneumatic pressure calibrators DPI 601-IS,
DPI 602, DPI 603, DPI 605, DPI 605-IS, DPI 610, DPI 610-IS.
Ordering Information
Specify type number IDT 600-1 or IDT 600-2
Continuing development sometimes necessitates
specification changes without notice
GE Druck
g
IDT 600
Ingress Dirt Moisture Trap
Druck Limited
Fir Tree Lane, Groby, Leicester, LE6 0FH, UK
+44 (0)116 2317100 Fax:+44 (0)116 2317103
E-Mail: sales@druck.com www.druck.com
Agent:
06/04
GE Druck
g
Loading...