Page 1
GE Infrastructure
Sensing
Intell igent Digital
Output Sensors™
(IDOS)
Druck Universal Pressure
Modules
IDOS is a GEDruck product.
GEDruck has joined other GE
high-technology sensing
businesses under a new name
_
GE Infrastructure Sensing.
Features
• Pressure ranges from 10 in H2O to 10,000 psi
(25 mbar to 700 bar)
• 0.05% full scale (FS) all-inclusive accuracy
• Optional 0.01% FS premier accuracy
• Fully interchangeable; no set-up
• Impact resistant , elastomer prot ect ed
• Robust , weatherproof and simple to use
• Remote pressure sensor for IDOS compatible
instruments
• Applications: test, measurement , monitoring and
calibration
• Expands instrument ranges and capability
The IDOS Universal Pressure Modules (UPM) are robust and
simple to use.
Highly accurate IDOS are housed in tough functional cases,
providing dependability along with plug and play
connectivity.
They provide a cost effective solution for expanding instrument ranges, adding pressure measurement capability and
addressing more applications.
Applications
g
Page 2
GE Infrastructure
Sensing
Features P P RTD °F (°C) TC mA/V Hz
Indicator (measure pressure) !!
Calibrator (measure or source) !! ! ! ! ! !
Thermometer (dual input T1, T2, T1 - T2) !
mA measure with 24 V loop power !! !! !
Switch test !! !! !
HART resistor !! !! !
Programmable step and ramp output !! ! ! ! !
Hold, scaling, max/min/avg, filter, scaling, !!!! ! ! ! ! !!
tare
25 pressure units, flow scaling, leak test !!!! ! ! ! ! !!
1000 points data memory, RS232 !
Applications
Measurement and monitoring !!!! ! !! ! !!
Indicator, controller and recorder testing !!!! !! ! ! !
Transmitter maintenance and calibration !! !! !
Process loop set-up and maintenance !! !! !
Switch, trip and safety system testing !! !! !
!With IDOS UPM connected
DPI 800
DPI 832
DPI 841
DPI 842
DPI 802
DPI 811
DPI 812
DPI 820
DPI 821
DPI 822
IDOS
Specifications
DPI 150 Pressure Indicator
IDOS Flexibility
Intelligent Digital Output Sensor (IDOS)
Universal Pressure Modules are available from
10 in H2O to 10,000 psi (25 mbar to 700 bar).
Total Flexibility
IDOS modules can be used with any compatible instrument; for example, a DPI 812 RTD loop calibrator can
become a fully featured pressure calibrator.
Instrument Range Expansion
Simply achieved by adding modules
DPI 800 Series IDOS UPM DPI 150
Compatible Products
The DPI 800 Series of robust , highly rel iable and simple
to use hand-held indicators and calibrators address a
broad range of applications with the following features:
Features Applications
• Barometer* • Sensor calibration
• IEEE-488* and RS232 • Instrument calibration
• Analog output, V and mA* • Test/measurement
• Airspeed indication • System monit oring
• Hold, maximum/minimum and average • Autmated production test
• Filter, scaling and tare and calibration
• 25 pressure units plus 5 user • Pressure data logging
• Leak test • Leak testing
*Optional feature
Pressure Range G/D G A Media *Accuracy %FS
+
_
SP
±10 in H2O (25 mbar) ! "#0.1 0.03
.±1, 3, 5, or 10 psi ! "#0.075 0.03
(70, 200, 350,
or 700 mbar)
5 psi (350 mbar) ! " 0.1 N/A
-15 to 15 or 30 psi ! "#0.05 0.01
(-1 to 1 or 2 bar)
30 psi (2 bar) ! " 0.075 N/A
-15 to 50, 100, 150 ! ! 0.05 0.01
or 300 psi (-1 to 3.5,
7, 10 or 20 bar)
100, 300 psi ! ! 0.075 N/A
(7, 20 bar)
500, 1000, 1500, ! ! 0.05 0.01
2000 or 3000 psi
(35, 70, 100, 135,
200 bar)
5000 or 10,000 psi ! ! 0.05 N/A
(350 or 700 bar)
Sealed gauge
G = gauge, A = absolute, G/D = gauge/differential; calibrated referenced to atmosphere maximum line pressure 30 psi (2 bar). !Stainless steel compatibility "Non-cor-
rosive gas/fluid #Non-corrosive gas. (N/A = not available). Accuracy assumes regular
zero correction.
A high precision, simple to use bench or panel mounted
indicator suitable as a secondary standard
Page 3
GE Infrastructure
Sensing
IDOS
Specifications
*IDOS UPM_S Standard Accuracy
Total accuracy including calibration uncertainty, operation over 32°F to 122°F (0°C to 50°C) and one year stability. Negative calibration included.
*IDOS UPM_P Premier Accuracy
Precision over 65°F to 82°F (18°C to 28°C), for operation
from 41°F to 113°F (5°C to 45°C) 0.014% full scale (FS),
0.075% for ranges 10 in H2O to 10 psi (25 to 700 mbar)
Stability 0.01% reading/year
(0.03% for ranges 10 in H2O to 5 psi (25 to 350 mbar)
Calibration uncertainty 50 ppm of reading.
Negative calibration optional
Overpressure (maximum transient/intermittent
pressure)
5 psi (350 mbar) and below 4 x FS
10 to 10,000 psi (700 mbar to 700 bar) 2 x FS
Maximum working pressure: 1.1 x FS
Pressure Connections
G 1/8 female; M5 reference on G ranges above 30 psi
(2 bar)
1/8 NPTfemale; 10-32 UNF reference on G ranges
above 30 psi (2 bar)
Electrical Connection
3 ft (1 m) cable with locking instrument connector
Operating Temperature
14°F to 122°F (-10°C to 50°C)
Humidity
0 to 90% non-condensing, Def Stan 66-31, 8.6 Cat III
Options
(A) Negative Calibration
UPM P module ranges 300 psi (20 bar) and below.
Please refer to pressure range table for ranges and
accuracies.
Shock and Vibration
BS EN61010:2001. Pressure Equipment Directive (PED),
Class SEP. CE marked.
EMC
BS EN61326-1:1998 + A2:2001
Safety
Electrical BS EN61010:2001. PED, Class SEP. CE marked.
Size (l x w x h) and Weight
5 in (maximum) x 2.3 in x 1.7 in
(130 mm x 60 mm x 45 mm), .53 to .71 lbs (240 to 325 g)
Ordering Information
Please state the model number IDOS UPM S for the
standard accuracy version or IDOS UPM P for the
premier accuracy version followed by the range, G/D, G
or A and G 1/8 female or 1/8 NPTfemale.
Each unit is supplied with calibration certificate and user
guide.
Related Products
GEis a world leader in the design and manufacture of
pressure, temperature and electrical f ield cal ibrators,
laboratory/workshop calibration equipment and pressure sensors.
Page 4
GE Infrastructure
Sensing
g
©2005 GEInfrastructure Sensing, Inc. All rights reserved.
920-131A
All specifications are subject to change for product improvement without notice.
Intelligent Digital Output Sensors™ is a trademark of GE Infrastructure Sensing, Inc.
GE®is a registered trademark of General Electric Co. Other company or product
names mentioned in this document may be trademarks or registered trademarks of
their respective companies, which are not affiliated with GE.
www.gesensing.com
Loading...