Drager Babytherm 8000 Service Manual

Dräger Medical, Inc.

Technical Service Bulletin # 3

Product: Babytherm 8000 OC
Date: November 30, 1999
Re: Securing the Radiant Heater RH 600
Reference Doc: IDM no. 4 / 10.97
Reason: Unsecured fixing screws of the Radiant Heater RH 600 can loosen

during operation. If fixing screws loosen the RH 600 can fall down in
worst case.

Solution: The 4 fixing screws of the Radiant Heater RH600 shall be secured

with Loctite 221 in the course of servicing.

Devices affected: All Babytherm 8000 OC units having Radiant Heater RH600.
When: At next Service Call or Preventive Maintenance. This action was to

be completed by February 28, 1998. Please verify that all units have
been modified.

Additional info: This TSB is identical to TSB RH 600W # 1
Cost: Covered by Customer, post warranty.
Ordering Info: 79 01 966, screw locking agent, low, Loctite 221
Distribution: Dräger Service Personnel and Authorized Service Organizations for

NCS products.

If you have any questions, please contact Technical Support by
phone at 1-800-543-5047 or by fax at 1-215-723-5935

Dräger Medical, Inc.
Technical Product Manager

Andreas Lenke

6132.200 Babytherm 8000 WB / OC TSB No. 3 November 1999 1/1