2.5 Gigabit Ethernet doubles the bandwidth and
leverages Cat 5e cabling, saving TCO of upgrading
802.11ac Wave 2 APs and 2.5 Gigabit PC/laptops
10 Gigabit Ethernet Connection
Two 10 Gigabit SFP+ high-bandwidth uplink ports
secure full bandwidth connections to the aggregation
layer in 2.5 Gigabit infrastructures
Power over Ethernet
Eight PoE-capable ports delivering up to 30 W of
power each and a total PoE budget of 240 W for easy
deployment of access points and surveillance devices
DMS-1100 Series
2.5 Gigabit Ethernet Smart Managed Switches
Features
Rich Layer 2 Features
• STP, RSTP, MSTP, ERPS
• 802.1Q/Port/Asymmetric VLAN
• Port mirroring
• IGMP/MLD Snooping
• LACP
• D-Link Safeguard Engine
• DoS attack prevention
Intuitive Management
• D-Link Network Assistant (DNA) utility
• Web-based GUI
• Built-in SNMP MIB for remote NMS (D-View/DNA)
Advanced Features
• Auto Surveillance VLAN
• Auto Voice VLAN
• Loopback detection
• Cable diagnostics
• LLDP/LLDP-MED
Green Technology
• Power saving features:
• LED shuto
• IEEE 802.3az Energy-Ecient Ethernet (EEE)
The D-Link DMS-1100 Series 2.5 Gigabit Ethernet Smart Managed Switches are a cost-eective
2.5 Gigabit switch series capable of servicing a range of network needs in any type of business.
Featuring eight 2.5 Gigabit access ports and two 10 Gigabit SFP+ uplink ports, this series is
ideal for deploying multiple high-performance 802.11ac Wave 2 access points using 2.5 Gigabit
connections, while providing a 10 Gigabit wire-speed uplink for optimal bandwidth when
accessing the larger local area network.
Seamless Integration and Future Proof
The DMS-1100 Series supports IEEE 802.3bz and is fully backwards compatible with 802.3ab
Gigabit Ethernet to deliver 2.5 Gigabit speed over conventional, widespread available Cat 5e
cables over a distance of up to 100 meters.
Driven by the increasing popularity of 802.11ac Wave 2 access points and the emerging
trend of 2.5 Gigabit LAN connections, 2.5 Gigabit technology will soon replace Gigabit as
the standard for Ethernet connectivity. With backwards compatibility for older standards,
the DMS-1100 Series can be awlessly integrated into existing Gigabit Ethernet network
infrastructures while simultaneously making your network future-proof for the next generation
of 2.5 Gigabit connectivity.
Complete Layer 2 and Troubleshooting Features
The DMS-1100 Series comes with a complete lineup of L2 features, including port
mirroring, Spanning Tree Protocol (STP), and Link Aggregation Control Protocol (LACP). The
DMS-1100 Series also features loopback detection and cable diagnostics to help network
administrators identify and solve network problems quickly and easily. Loopback detection
is used to detect loops created by a specic port and automatically shuts down the aected
port. Cable diagnostics helps network administrators quickly examine the quality of the copper
cables, recognize the cable type, and detect cable errors.
Page 2
DMS-1100 Series
2.5 Gigabit Ethernet Smart Managed Switches
Versatile Management
The DMS-1100 Series comes with the D-Link Network Assistant (DNA)
that simplies the conguration of devices that support the D-Link
utility
Discovery Protocol. The
customers to discover multiple D-Link Smart Managed Switches within the
same L2 network segment and displays them on screen for instant access.
With this utility, users do not need to change the IP address of their PC. This
utility further allows for simultaneous conguration and basic setup of all
discovered devices, including password changes and rmware upgrades. The
DMS-1100 Series also supports D-View. D-View is a network management
system that allows for the central management of critical network
characteristics such as availability, reliability, resilience, and security.
Technical Specications
General
D-Link Network Assistant utility easily allows
Power over Ethernet Support
The Power over Ethernet-ready DMS-1100-10TP features a total power
budget of 240 W, capable of supplying up to 30 W of power per port to
connected PoE-enabled devices. Power over Ethernet simplies deployment
of surveillance devices and access point infrastructures by reducing cable
clutter, and eliminating the need for dedicated power supplies to allow PoE
devices to be installed in remote locations.
Model
Interfaces
Port Standard & Functions• IEEE 802.3u 100BASE-TX
Network Cables for
2.5GBASE-T
Media Interface Exchange• Auto MDI/MDIX adjustment for all twisted-pair ports
• DMS-1100-10TS• DMS-1100-10TP
• 8 x 100/1000/2.5GBASE-T ports
• 2 x SFP+ ports
• IEEE 802.3ab 1000BASE-T
• IEEE 802.3z 1000BASE-X
• IEEE 802.3bz 2.5GBASE-T
• IEEE 802.3ae 10G over fiber
• IEEE 802.3az
• IEEE 802.3af/at (DMS-1100-10TP)
• Cat 5e (100 m max)
• 8 x 100/1000/2.5GBASE-T PoE ports
Performance
Switching Capacity• 80 Gbps
Maximum Packet
Forwarding Rate
Transmission Method• Store-and-forward
MAC Address Table• Up to 16 ,000 entries per device
• 59.52 Mpps
Power over Ethernet (PoE)
• 2 x SFP+ ports
PoE Standards• N/A• IEEE 802.3af/at
PoE Ports• N/A• Ports 1 to 8
PoE Budget• N/A• 240 W
Page 3
2.5 Gigabit Ethernet Smart Managed Switches
Physical
AC Input• 100 to 240 VAC
DMS-1100 Series
Maximum Power
Consumption
Standby Power
Consumption
Operating Temperature• -5 to 50 °C (23 to 122 °F)
Storage Temperature• -40 to 70 °C (-40 to 158 °F)
Operating Humidity• 0% to 95% non-condensing
Storage Humidity• 0% to 95% non-condensing
Dimensions (L x W x H)• 440 x 210 x 44 mm (17.32 x 8.27 x 1.73 in)• 440 x 250 x 44 mm (17.32 x 9.84 x 1.73 in)