Managed L2 Gigabit Stack
Entry-Level SNMP Solution
High Port Density Gigabit & PoE Stackable Switches
Up to 4 Fiber Links Via Combo SFP
10-Gigabit Bi-Directional Stacking Bandwidth
802.1X User Authentication & ACL Access Security
Network Protection With D-Link Safeguard Engine
FEATURES
Flexible Choices of High Port
Densities
8, 24 or 48 10/100/1000BASE-T Ports
4 Combo SFP or 16 Dedicated SFP for Fiber Gigabit and
100BASE-FX Links
802.3af Power Over Ethernet Support
High Bandwidth Physical
Stacking
2 HDMI Ports Per Switch
Up to 20Gbps Full-Duplex Stacking Bandwidth
Up to 6 Units (288 Gigabit Ports) Per Stack
Linear or Fault Tolerant Ring Stacking Topology
Security
Port Security
ACL
802.1X Port-Based/MAC-Based Access Control
Guest VLAN
Traffic Segmentation
256 VLAN Groups
D-Link Safeguard Engine
Traffic Monitoring/Bandwidth
Control
Port Mirroring
Granular Bandwidth Control (Down to 64Kbps Per
Port/Flow)
Broadcast Storm Control
Resiliency/Performance
802.1D, 802.1w and 802.1s Spanning Tree
802.3ad Link Aggregation (Port Trunks)
Trunking/Mirroring Across Multiple Units Within a Stack
Jumbo Frames Up to 10,240 Bytes
Configuration/Management
Web-Based GUI
Command Line Interface (CLI)
Telnet Client/Server
SNMP v1, v2c, v3 & RMON v1
RADIUS/TACACS+ Authentication for Management
Access
SSH v1, v2, SSL v3
1
Available on DGS-3100-24P and DGS-3100-48P only.
1
he DGS-3100 series switches are managed Layer 2 Gigabit stackable switches designed
T
as feature-rich, low-cost devices in the entry-level network management category. These
switches provide wide-ranging port densities and up to 20Gbps physical stacking.
Outstanding features include scalable expansion, SFP fiber links, comprehensive network
security, granular bandwidth control and extensive network management. Small to medium
businesses (SMBs) looking for a flexible, advanced and affordable solution can deploy these
switches to set up Gigabit connections to their desktops or build up a company-wide network
backbone.
Physical Stacking. Each of the DGS-3100 series switches comes with 2 dedicated HDMI
stacking ports, each providing 5Gbps stacking bandwidth (up to 20Gbps for the overall
system in full-duplex mode, bi-directional). Up to 6 units, 288 10/100/1000Mbps ports can be
stacked up in a linear or fault-tolerant Ring topology. A stack can consist of 10/100/1000Mbps
switches, 10/100/1000Mbps PoE switches, or a combination of both types, with up to 96 SFP
fiber links. Units can be gradually added to the stack to accommodate growth, while
expansion beyond a single stack is possible using Gigabit port trunks between stacks, or from
stack to network backbone and server paths.
Security & Availability. The DGS-3100 stack includes many security features including Access
Control List (ACL), 802.1X Port-Based/MAC-Based Access Control and 802.1X Guest VLAN
to make network access available to authorized users. To prevent malicious attacks and
virus/worm affection from overwhelming the switch with unnecessary workload, the DGS-3100
stack provides the D-Link Safeguard Engine function to increase the switch's reliability and
availability.
Resilience/Performance Enhancement. To enhance network resilience, the DGS-3100 stack
provides Spanning Tree protocols, including 802.1D, 802.1w and 802.1s for redundant bridge
paths. 802.3ad Link Aggregation provides the aggregated bandwidth between switches or
server. For Quality of Service (QoS), it supports 802.1p Priority Queues and packet
classification based on TOS, DSCP, MAC, IP, VLAN ID and L4 protocol types, enabling
Internet voice, video and streaming media applications to run smoothly.
Traffic Monitoring/Bandwidth Control. Network administrators can define throughput levels for
each port to manage bandwidth. The bandwidth limiting feature provides fine granularity with
the ability to define limits down to 64Kbps segments. Broadcast storm control can reduce the
level of damage that a virus attack can do to the network. The switch provides IGMP snooping
and MLD snooping to control multicast transmission, and port mirroring to facilitate
diagnostics.
Management. The DGS-3100 stack supports standard-based management protocols such as
SNMP, RMON, Telnet, Web GUI and SSH/SSL security authentication. With DHCP autoconfiguration, the administrator can pre-set configurations and save them in a TFTP server,
and individual switches can boot their IP from the server and load in the pre-set
configurations.
2
1
DGS-3100 Series
Hardware Specifications
Interface
10/100/1000BASE-T Ports
Combo SFP
Dedicate SFP
RS-232 Console Port
Optional Redundant Power Supply
Stacking
HDMI Stacking Ports
Number of Unit Per Stack (Max)
Bandwidth/Topology
Power Over Ethernet
802.3af PoE Support
Power Provision Per Port (Max.)
System PoE Power Budget
Auto Power/Device Discovery
Over-Current Protection
Performance
Switch Capacity
64-Byte Packet Forwarding Rate
MAC Address Table Size
Packet Buffer
Jumbo Frame (Max.)
DGS-3100-24TG
8
-
16
DPS-200
2
6
-
-
-
-
-
68Gbps
50.60Mpps
8K
768KB
10,240Bytes
DGS-3100-24
24
4
- - - -
DPS-200
2
6
-
-
-
-
-
68Gbps 116Gbps
50.60Mpps 50.60Mpps
8K 8K
768KB
10,240Bytes
DGS-3100-24P
24
4
DPS-600 DPS-500 DPS-600
2 2 2
6 6 6
Up to 10Gbps (Linear Topology)
Up to 20Gbps (Bi-Directional Redundant Ring Topology)
Per 10/100/1000BASE-T Port
15.4W
370W
68Gbps 116Gbps
768KB
10,240Bytes
DGS-3100-48
48
4
-
-
-
-
-
86.31Mpps
8K
1.5MB
10,240Bytes
DGS-3100-48P
48
4
Per 10/100/1000BASE-T Port
15.4W
370W
86.31Mpps
8K
1.5MB
10,240Bytes
2
Physical & Environmental
Power Input
Power Consumption (Max)
Dimensions
Weight
Heat Dissipation
MTBF
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
EMI/EMC
Safety
DGS-3100 Series
38.30W
440mm x 210mm x 44mm
2.95kg
120.26 BTU/hr
195,655 hrs
49.39W
440mm x 210mm x 44mm
3.04kg
168.53 BTU/hr
212,377 hrs
100 to 240 VAC, 50 to 60 Hz Internal Universal Power Supply
555.50W
440mm x 310mm x 44mm
19-inch Rack Mount Width, 1U Height
5.58kg
1895.48 BTU/hr
117,136 hrs
o o o o
0 to 40 C (32 to 104 F)
o o o o
-10 to 70 C (-14 to 158 F)
10% to 90% non-condensing
5% to 90% non-condensing
FCC Class A, ICES-003 Class A, CE, C-Tick, VCCI Class A
cUL, CB
102.63W
440mm x 310mm x 44mm
5.50kg
350.19 BTU/hr
103,924 hrs
619.30W
440mm x 430mm x 44mm
7.43kg
2113.18 BTU/hr
96,648 hrs