D-Link DGS-1100-05PDV2 User Manual

Product Highlights

Gigabit Ethernet Speed

High-speed ports provide the latest Ethernet technology while retaining backward compatibility for connections to older computers and equipment

Revolutionary Energy Eciency

Innovative D-Link Green features help conserve energy without sacricing performance so you can reduce operating costs and protect the environment

Smart and Flexible Management

Powerful switch management functions can be performed through the web management interface or through the client-based utility

DGS-1100 Series

Smart Managed Switches

Features

Physical

• Available in multiple congurations, with or without PoE and ber support

• Fanless design for silent operation

Green Technology

• Link status detection

• IEEE 802.3az Energy-Ecient Ethernet compliant

• Time-based PoE (PoE models excluding DGS1100-08PV2)

Advanced Features

• IGMP Snooping

• Bandwidth Control

• IEEE 802.1Q VLAN trac segregation

• Port-based VLAN

• IEEE 802.1p Quality of Service

• Surveillance VLAN

• Voice VLAN

Management Features

• Client-based utility or web-based GUI

• Built-in SNMP MIB

The DGS-1100 Series is a range of switches designed to meet the requirements of small, medium,

and enterprise businesses. Support for multiple PoE standards make the DGS-1100 Series ideal

for IP surveillance deployments. Advanced management features, a range of diagnostic and

troubleshooting tools, and energy ecient technologies provide a exible solution to meet

your networking requirements.

D-Link Green/Power Saving Performance

Compliant with IEEE 802.3az Energy Ecient Ethernet (EEE), the DGS-1100 Series consumes

less energy by cutting down on power consumption when port utilization is low. By deploying

compatible devices, users can cut operating costs and even cut down on additional cooling

equipment, helping small and medium-sized businesses stay within their budgets. The

DGS-1100 Series also features D-Link Green technology that helps save energy automatically.

The switches monitor the link status of every port and signicantly reduce power consumption

of the interface when there is no link or network trac detected.

Easy to Deploy

The DGS-1100 Series supports an intuitive client-based utility (D-Link Network Assistant) and a

web-based management interface. The client-based D-Link Network Assistant (DNA) discovers

all D-Link Smart Managed Switches within the same Layer 2 network segment, making the

initial setup quick and easy. This allows extensive switch conguration and basic administration

of discovered devices, including password changes and rmware upgrades. The web-based

interface provides a user-friendly way for network administrators to manage the switch down

to the port level. The interface can be accessed from a web browser, allowing the switches to

be controlled from any PC that is connected to the network.

DGS-1100 Series Smart Managed Switches

Surveillance VLAN and Bandwidth Control

The DGS-1100 Series supports surveillance VLAN for IP surveillance

deployments. This gives video trac a dedicated VLAN and higher priority

through the switch, separating surveillance trac from the rest of the network.

This ensures security and guarantees the quality of the video trac, sparing

businesses the added cost of dedicated surveillance hardware. Bandwidth

Control can reserve bandwidth on a per-port basis for important functions

that require larger bandwidth or have higher priority.

Advanced Features

The DGS-1100 Series is equipped with advanced security features such as

Static MAC, Storm Control, and IGMP Snooping. Static MAC allows users to

create a MAC whitelist for specic ports, helping administrators limit network

access to authorized devices only. Storm Control monitors broadcast,

multicast, or unknown unicast trac and will start blocking or discarding

packets which could ood the network when the dened threshold is

exceeded. IGMP Snooping is able to reduce the load of L3 multicast routers

and save bandwidth in network throughput.

Easy Troubleshooting

The DGS-1100 Series features Loopback Detection and Cable Diagnostics to

help network administrators nd and solve network problems quickly and

easily. Loopback Detection is used to detect loops created by a specic port

and automatically shuts down the aected port. Cable Diagnostics helps

network administrators quickly examine the quality of the copper cables,

recognize the cable type, and detect cable errors.

PoE Support

The DGS-1100 Series P Models provides Power over Ethernet (PoE) support,

reducing deployment time for IP cameras, VoIP phones, and access points.

Dedicated power adapters are no longer required, as the DGS-1100-08PV2

/24PV2/18PV2/10MPV2/10MPPV2/26MPV2/26MPPV2 models comply with

IEEE 802.3af and 802.3at PoE standards and provide up to 30 watts per port.

The DGS-1100-10MPPV2/26MPPV2 models support IEEE 802.3bt, providing

up to 90 watts on selected ports for the latest high-powered Pan Tilt Zoom

(PTZ) cameras.

switch or injector, allowing for more exible installation in remote areas with

no available power outlets.

Additionally, the DGS-1100-05PD can be powered by a PoE

DGS-1100 Series Smart Managed Switches

Technical Specications

General DGS-1100-05V2 DGS-1100-05PDV2 DGS-1100-08V2 DGS-1100-08PV2

Hardware Version • A1

Size • Desktop

Number of Ports • 5 x 10/100/1000 Mbps

• IEEE 802.3 for Ethernet

• IEEE 802.3u for Fast Ethernet

Port Functions

• IEEE 802.3ab for Gigabit Ethernet

• IEEE 802.3af (for DGS-1100-05PD)

• IEEE 802.3at (for DGS-1100-08P)

• Auto-negotiation

• 2 x 10/100/1000 Mbps (PoE)

• 3 x 10/100/1000 Mbps

• 8 x 10/100/1000 Mbps • 8 x 10/100/1000 Mbps (PoE)

• Supports half/full-duplex operation (half at 10/100 Mbps, full at 1000 Mbps)

• Auto MDI/MDIX

• IEEE 802.3x Flow Control supports full-duplex mode

• IEEE 802.3az compliant

Performance

Switching Capacity • 10 Gbps • 10 Gbps • 16 Gbps • 16 Gbps

Maximum Forwarding Rate • 7.44 Mpps • 7.44 Mpps • 11.9 Mpps • 11.9 Mpps

MAC Address Table Size • 2K entries • 2K entries • 4K entries • 4K entries

Packet Buffer • 1 Mbits • 1 Mbits • 1.5 Mbits • 1.5 Mbits

Flash Memory • 2 Mbytes

PoE

PoE Standard - • IEEE 802.3af - • IEEE 802.3af/802.3at

PoE Capable Ports - • Ports 1 to 2 - • Ports 1 to 8

PoE Power Budget - • PoE Passthrough:

• 18 W with 802.3at input

• 8 W with 802.3af input

- • 64 W

• 30W per PoE port max

Power Consumption

Standby Mode • 1.39 W • 1.728 W • 1.93 W • 2.0 W

Maximum Power Consumption

• 3.42 W • 24.08 W (PoE on)

• 3.24 W (PoE off)

• 4.94 W • 77.9 W (PoE on)

• 4.6 W (PoE off)

Physical

Power Input • 100 to 240 V AC, 50 to

MTBF • 1,562,055 hours • 2,357,475 hours • 1,456,992 hours • 786,841 hours

Acoustics • 0 dB(A)

Heat Dissipation • 11.67 BTU/hr • N/A • 16.85 BTU/hr • 265.85 BTU/hr

Weight • 0.23 kg (0.51 lbs) • 0.38 kg (0.84 lbs) • 0.34 kg (0.75 lbs) • 0.43 kg (0.95 lbs)

Dimensions • 100.5 x 82 x 28 mm

60 Hz external power adapter

(3.6 x 3.3 x 1.1 in)

• 802.3af/at PoE power only via PD port 5

• No power supply

• 150 x 97 x 28 mm (5.9 x 3.8 x 1.1 in)

• 100 to 240 V AC, 50 to 60 Hz external power adapter

• 145 x 82 x 28 mm (5.7 x 3.3 x 1.1 in)

• 100 to 240 V AC, 50 to 60 Hz external power adapter

• 171 x 97.8 x 28.6 mm (6.7 x 3.9 x 1.1 in)

+ 7 hidden pages