Delonghi ECAM370.70.B Instruction manuals

ECAM37X.70

BEAN TO CUP ESPRESSO AND

CAPPUCCINO MACHINE

Instructions for Use

Instructions videos available at:

http://dinamicaplus.delonghi.com

A12

A13

B C

A10

A11

A22

A21

A20

A19

A16

A14

A15

A17

A18

page 4

B C

B1B8

READY

CONTENTS

1. INTRODUCTION ...........................................5

1.1 Letters in brackets .................................................... 5

1.2 Troubleshooting and repairs..................................... 5

2. DESCRIPTION ..............................................5

2.1 Description of the appliance (page 2 - A) ................. 5

2.2 Description of the homepage (main screen) (page 3 - B) ...5

2.3 Description of the control panel (page 3 - C) ............ 5

2.4 Description of the accessories (page 3 - D) ............... 5

2.5 Description of the milk container (page 3 - E) .......... 5

3. SETTING UP THE APPLIANCE .........................5

4. TURNING THE APPLIANCE ON .......................6

5. TURNING THE APPLIANCE OFF ......................6

6. MENU SETTINGS .......................................... 7

6.1 Access the settings menu ......................................... 7

6.2 Exit the menu ........................................................... 7

6.3 Rinse ....................................................................... 7

6.4 Descaling ................................................................ 7

6.5 Water lter ..............................................................7

6.6 Beverages settings .................................................. 7

6.7 Auto-o (standby) .................................................. 7

6.8 Energy saving ......................................................... 7

6.9 Coee temperature .................................................7

6.10 Water hardness .......................................................8

6.11 Set language ........................................................... 8

6.12 Beep ........................................................................ 8

6.13 Default values ......................................................... 8

6.14 Statistics ..................................................................8

7. MAKING COFFEE ..........................................8

7.1 Making coee using coee beans ............................ 8

7.2 Selecting the coee aroma ...................................... 8

7.3 Selecting the coee quantity ................................... 9

7.4 Making coee using pre-ground coee.................... 9

7.5 Adjusting the coee mill .......................................... 9

7.6 Tips for a hotter coee ............................................. 9

8. COFFEE POT .................................................9

9. MAKING CAPPUCCINOS AND MILKBASED

COFFEES ................................................... 10

9.1 Filling and attaching the milk container ................10

9.2 Adjusting the amount of froth ...............................11

9.3 Making cappuccinos and milk-based coees

automatically ......................................................... 11

9.4 Cleaning the milk container after use ................... 11

10. DELIVERING HOT WATER ............................ 12

11. CUSTOMISING THE BEVERAGES .................. 12

12. CLEANING ................................................. 12

12.1 Cleaning the machine ............................................ 12

12.2 Cleaning the internal circuit ................................... 12

12.3 Cleaning the coee grounds container ................... 13

12.4 Cleaning the drip tray and condensate tray ............ 13

12.5 Cleaning the inside of the machine ....................... 13

12.6 Cleaning the water tank ......................................... 13

12.7 Cleaning the coee spouts ..................................... 13

12.8 Cleaning the pre-ground coee funnel .................. 13

12.9 Cleaning the infuser ............................................... 13

12.10 Cleaning the milk container ................................... 14

12.11 Cleaning the hot water nozzle ................................ 15

13. DESCALING................................................15

14. SETTING WATER HARDNESS ........................ 16

14.1 Measuring water hardness ..................................... 16

14.2 Setting water hardness ......................................... 16

15. WATER SOFTENER FILTER ........................... 16

15.1 Installing the lter ................................................. 16

15.2 Replacing the lter................................................. 17

15.3 Removing the lter ................................................ 17

16. TECHNICAL DATA ....................................... 17

16.1 Tips for Energy Saving ............................................ 17

17. DISPLAYED MESSAGES ............................... 18

18. TROUBLESHOOTING ................................... 23

1. INTRODUCTION

Thank you for choosing this bean to cup espresso and cappuccino machine. Take a few minutes to read this Instruction for Use. This will avoid all risks and damage to the appliance.

1.1 Letters in brackets

The letters in brackets refer to the legend in the description of the appliance on pages 2-3.

1.2 Troubleshooting and repairs

In the event of problems, rst try and resolve them by reading the information given in sections "17. Displayed messages" and "18. Troubleshooting". If this does not resolve the problem or you require further information, you should consult Customer Services by calling the number given on the annexed "Customer Service" sheet. If your country is not among those listed on the sheet, call the number given in the guarantee. If repairs are required, contact De’Longhi Customer Services only. The addresses are given in the guarantee certicate provided with the machine.

2. DESCRIPTION

2.1 Description of the appliance (page 2 - A)

A1. Beans container lid A2. Pre-ground coee funnel lid A3. Beans container A4. Pre-ground coee funnel A5. Grinding adjustment dial A6. Cup shelf A7. button: to turn the appliance on and o (standby) A8. Hot water connection nozzle A9. Coee spouts (adjustable height) A10. Condensate tray A11. Coee grounds container A12. Cup tray A13. Drip tray water level indicator A14. Drip tray grille A15. Drip tray A16. Water tank lid A17. Water tank A18. Water softener lter housing A19. Infuser door A20. Infuser A21. Power cord connector socket A22. Main switch

2.2 Description of the homepage (main screen)

(page 3 - B) B1. Energy Saving active symbol B2. Selected aroma

B3. Directly selected beverages B4. Scroll arrow B5. Quantity selected B6. Descale required alarm B7. Milk container needs cleaning alarm B8. Filter needs replacing alarm

2.3 Description of the control panel (page 3 - C)

C1. : beverage aroma selection

C2. : My beverages selection menu. Unless previous-

ly programmed from the settings menu as described in chapter "11. Customising the beverages", the beverage is programmed directly the rst time you use the appliance

C3. : appliance settings menu

C4. : beverage quantity selection

2.4 Description of the accessories (page 3 - D)

D1. "Total Hardness Test" indicator paper D2. Pre-ground coee measure D3. Descaler D4. Water softener lter (certain models only) D5. Cleaning brush D6. Hot water spout D7. Power cord

2.5 Description of the milk container (page 3 - E)

E1. Froth adjustment and CLEAN dial E2. Milk container lid E3. Milk container E4. Milk intake tube E5. Frothed milk spout (adjustable)

3. SETTING UP THE APPLIANCE

Please note!

• The rst time you use the machine, the water circuit is empty and the appliance could be very noisy. The noise becomes less as the circuit lls.

• Coee has been used to factory test the appliance and it is therefore completely normal for there to be traces of coee in the mill. The machine is, however, guaranteed to be new.

• You should customise water hardness as soon as possible following the instructions in section "14. Setting water hardness".

1. Insert the power cable connector (D7) into the socket (A21) at the back of the appliance and connect the appliance to the mains electricity supply (g. 1). Make sure the main switch (A22) at the back of the appliance is pressed (g. 2);

11 2

2. To select the language of the display, press and hold until the required language appears on the

display, then press the ag corresponding to the language.

Follow the instructions indicated on the appliance display:

3. Remove the water tank (A17) (g. 3), ll to the MAX line

(marked on the tank) with fresh water (g. 4, then put the tank back in the appliance (g. 5);

433

4. Check that the hot water spout (D6) is inserted on the con-

nection nozzle (A8) (g. 6) and place a container holding a minimum of 100 ml underneath (g. 7);

5. Press to conrm: The appliance delivers

water from the spout (g. 8) then goes o automatically.

The coee machine is now ready for normal use.

Please note!

• The rst time you use the appliance, you need to make 4

- 5 cappuccinos before it starts to give satisfactory results.

• When making the rst 4 - 5 cappuccinos, it is normal to

hear the noise of boiling water. After this, the noise becomes less.

• To improve the performance of your appliance, we recom-

mend installing a water softener lter (D7) as described in section "15. Water softener lter". If your model is not provided with a lter, you can request one from De'Longhi Customer Services.

4. TURNING THE APPLIANCE ON

Please note!

• Before turning the appliance on, make sure the main switch (A22) is pressed (g. 2).

• Each time the appliance is turned on, it performs an automatic preheat and rinse cycle which cannot be interrupted. The appliance is ready for use only after completion of this cycle.

1. To turn the appliance on, press the button (A15) (g. 8);

2. When at temperature, the appliance performs a rinse cycle delivering hot water from the coee spouts. As well as heating the boiler, this also heats the internal circuits by circulating hot water.

The appliance is ready for use when the main screen (homepage) appears.

5. TURNING THE APPLIANCE OFF

Whenever the coee machine is turned o after being used to make coee, it performs an automatic rinse cycle.

1. To turn the appliance o, press the button (A15) (g. 8).

2. T

he appliance performs a rinse cycle then goes o

(stand-by).

Please note!

If you will not be using the appliance for some time, unplug from the mains socket:

1. First turn the appliance o by pressing the button (g. 8);

2. Release the main switch (A22) at the back of the appliance (g. 2).

Important!

Never press the main switch while the appliance is on.

6. MENU SETTINGS

6.1 Access the settings menu

1. Press the " " button (C3) to enter the menu;

2. Scroll through the menu items by pressing until the required items is displayed;

3. Press the menu item you want to select.

6.2 Exit the menu

When you have made the adjustments, press until you are back on the homepage.

6.3 Rinse

Use this function to deliver hot water from the coee spouts (A9) and hot water spout (D6), if inserted, to clean and heat the appliance’s internal circuit.

1. Place a container with a minimum capacity of 100ml under the coee and hot water spouts (g. 8).

2. A few seconds after the "RINSING" item has been selected, hot water is delivered rst from the coee spouts and then from the hot water spout (if inserted) which cleans and heats the appliance’s internal circuit (g. 7).

3. To stop rinsing, press or wait for rinsing to stop automatically.

Please note!

• If the appliance is not used for more than 3-4 days, when you turn it on again, we strongly recommend performing 2/3 rinses before use;

• After cleaning, it is normal for the grounds container (A11) to contain water.

6.4 Descaling

For instructions on descaling, see section "13. Descaling".

6.5 Water lter

For instructions on how to install the lter (D7), see section "15. Water softener lter".

6.6 Beverages settings

In this section, you can consult your customised settings and, if you wish, reset the default values for each beverage.

1. Once in the settings menu, press "DRINK SETTINGS". The values for the rst beverage appear on the display;

2. The values are displayed on vertical bars. The default value

is indicated by the symbol, while the current value is highlighted by the solid part of the vertical bar;

3. To go back to the settings menu, press . To scroll and display the beverages, press ;

4. To reset the default values for the beverage displayed, press ;

5. "CONFIRM RESET?": to conrm, press (to cancel, press );

6. "VALORI FABBRICA""IMPOSTATI": press .

The beverage has been reset to the default values. Proceed with the other beverages or go back to the homepage by pressing

twice.

6.7 Auto-o (standby)

Auto-o can be set so that the appliance goes o after 15 or 30 minutes, or 1, 2 or 3 hours. To programme Auto-o, proceed as follows:

1. Press "AUTO-OFF";

2. Select the required time interval by pressing the selection arrows (increase) or (decrease);

3. To conrm, press .

Auto-o is now programmed.

6.8 Energy saving

Use this function to enable or disable energy saving. When enabled, the function reduces energy consumption in compliance with European regulations. To disable or enable "Energy Saving", proceed as follows:

1. Press "ENERGY SAVING" to disable ( ) or enable ( ) the function;

The corresponding symbol (B1) appears on the top bar of the homepage to indicate that the function has been enabled.

Please note:

If energy saving is active, you may have to wait a few seconds before delivery.

6.9 Coee temperature

To change the temperature of the water used to make the coffee, proceed as follows:

1. Press "COFFEE TEMPERATURE" appear on the display (B1) (the current value is underlined);

2. Press the value you want to set (LOW, MEDIUM, HIGH).

Please note:

Varying the temperature has most eect for long beverages.

. The selectable values

6.10 Water hardness

For instructions on setting water hardness, see section "14. Setting water hardness".

6.11 Set language

To modify the language of the display, proceed as follows:

1. Press "SET LANGUAGE";

2. Press the ag corresponding to the language you want to set (press to display all the languages available).

6.12 Beep

This enables or disables the beep emitted by the machine each time an icon is pressed or an accessory is inserted/removed. To disable or enable the beep, proceed as follows:

1. Press "BEEP" to disable ( ) or enable ( ) the function;

6.13 Default values

This resets all menu settings and programmed quantities for all proles back to the default values (with the exception of the language which remains as set). To reset the default values, proceed as follows:

1. Press "DEFAULT VALUES". "DEFAULT VALUES" is displayed. Press to conrm (or press to

cancel the operation);

2. "DEFAULT VALUES SET": press to conrm.

6.14 Statistics

This displays statistics relating to the machine. To view the statistics, proceed as follows:

1. Press "STATISTICS" and check all the statistics by scrolling through the items using .

7. MAKING COFFEE

7.1 Making coee using coee beans

Important!

Do not use green, caramelised or candied coee beans as they could stick to the coee mill and make it unusable.

1. Fill the container (A4) with coee beans (g. 10);

2. Place a cup under the coee spouts (A9) (g. 9);

3. Lower the spouts as near as possible to the cup (g. 11). This makes a creamier coee;

4. Then select your required coee:

• ESPRESSO

• COFFEE

• LONG

• DOPPIO+

• 2X ESPRESSO

5. Preparation begins. An image of the selected beverage appears on the display, together with a progress bar which gradually lls as preparation proceeds.

Please note:

• You can prepare 2 cups of ESPRESSO coee at the same

time by pressing "2X " during preparation of 1 ESPRESSO (the image is displayed for a few seconds at the start of preparation).

• While the machine is making coee, delivery can be interrupted at any moment by pressing .

Once the coee has been made, the appliance is ready to make the next beverage.

Please note!

• Various alarm messages could be displayed while using the appliance (FILL TANK, EMPTY GROUNDS CONTAINER, ETC.). Their meaning is explained in section "17. Displayed messages".

• For hotter coee, see section "7.6 Tips for a hotter coee".

• If the coee is delivered a drop at a time, too weak and not creamy enough or too cold, read the tips in sections "7.5 Adjusting the coee mill" and "18. Troubleshooting".

• Preparation of each coee can be customised (see section "11. Customising the beverages").

7.2 Selecting the coee aroma

Press the button (C1):

Custom (if programmed) / Standard

EXTRA LIGHT

9 1010

LIGHT

MEDIUM

STRONG

X-STRONG

(see "7.4 Making coee using pre-ground coee")

After delivering the beverage, the aroma setting is reset to the

value.

7.3 Selecting the coee quantity

Press the button (C4):

After delivering the beverage, the quantity setting is reset to the

value

7.4

Making coee using pre-ground coee

Important!

• Never add pre-ground coee when the machine is o or it could spread through the inside of the machine and dirty it. This could damage the machine.

• Never use more than 1 level measure (D2) as it could soil the inside of the coee machine or block the funnel (A4).

• When using pre-ground coee, only one cup can be made at a time.

1. Press the button (C1) until " " (ground) is displayed.

2. Open the pre-ground coee funnel lid (A2).

3. Make sure the funnel (A4) is not blocked, then add one level measure of pre-ground coee (g. 12).

Custom (if programmed) / Standard (see table in section "11. Customising the beverages"

SMALL SIZE

MEDIUM SIZE

LARGE SIZE

X-LARGE SIZE

• LONG

• COFFEE

6. Preparation begins. An image of the selected beverage appears on the display, together with a progress bar which gradually lls as preparation proceeds.

Once the coee has been made, the appliance is ready to make the next beverage.

Important! Making LONG coee: Halfway through preparation, the machine requests a further level measure of pre-ground coee. Proceed, then press

7.5 Adjusting the coee mill

The coee mill is set by default to prepare coee correctly and should not require regulating initially. However, if after making the rst few coees you nd that the coee is either too weak and not creamy enough or delivery is too slow (a drop at a time), this can be corrected by adjusting the grinding adjustment dial (A5) (g. 13).

Please note!

The grinding adjustment dial must only be turned when the coee mill is in operation during the initial phase of coee preparation.

If the coee is delivered too slowly or not at all, turn one click clockwise towards 7. For fuller bodied creamier coee, turn one click anticlockwise towards 1 (do not turn more than one click at a time

otherwise the coee could be delivered a drop at a time). The eect of the adjustment will be noticed only after making a further 2 cups of coee, at least. If this adjustment does not produce the desired result, turn the dial another click.

7.6 Tips for a hotter coee

For hotter coee, proceed as follows:

• per form a rinse cycle by selecting the "Rinsing" function in

the settings menu (section "6.3 Rinse ");

• warm the cups with hot water using the hot water function

(see section"10. Delivering hot water");

• increase the coee temperature in the settings menu

" ” (C3) (see section "6.9 Coee temperature "). Va rying the temperature has most eect for long beverages.

4. Place a cup under the coee spouts (A9).

5. Then select your required coee:

• ESPRESSO

8. COFFEE POT

1211

1. Position a carafe under the coee spouts (A9). When

choosing the carafe to use, bear in mind the quantity to be delivered, namely:

+ 19 hidden pages

Delonghi ECAM370.70.B Instruction manuals

Specifications and Main Features

Frequently Asked Questions

User Manual